Too slow for Toshiba 3.0 transfer speed

Hello

I just bought a toshiba external hard drive 3.0.
I use windows 7 genuine.

My pc specs are pretty ok cos I'm able to run games like crysis 2.
The problem is my external hard drive has a slow transfer rate. This problem, I started facing along 3 months ago. My hard drive is out of warranty.

My USB ports are ok and I connect it to the main port.
Transfer speeds are 10 Mbit/s, and sometimes it falls to Kbps!

In addition, it does not copy certain files and gives the error 'Cannot read from the source disk' or something like that.
There is no Virus in there, I activated the write cache. I've defragmented it.
My OS is fine, and also, I checked it on other operating systems.

Also, I tried to use "check the drive for errors" with the proper procedure, but it crashes somewhere in the Middle after he treats 500000 sectors or so.

I got my HDD of my cousin, such that it has used no more PC and with no cover so I have no idea of the model (although if there is any utility to find the model then please let know me).
In addition, it has worked well during the time. Me and my cousin come only from the India.

How can I solve this problem?
Please help me.

Post edited by: Emeric

null

Please don t understand me wrong, but if the matter is urgent you can call Toshiba in your country or the nearest Toshiba service provider contact.
It is the only forum user.

Tags: Toshiba

Similar Questions

  • Help! My Lenovo T60 Thinkpad too slow for life...

    Hello

    So I got my Lenovo T60 for like a year and a half, and until two months ago, it worked well enough (he got the occasional fan at first error message place however) and then all of a sudden he started bluescreening, as it would not go past the Welcome screen. So I installed Windows 7 and it worked fine for 3 weeks, then again bluescreening. So I decided to go back to XP. Establishment lasted 2 days (no, I'm not exaggerating) and since then, it takes 30 minutes just to start. And although I can't do anything on this issue because it is too slow; a simple command such as opening a folder takes 10 minutes! Has it damaged something by installing Windows 7? What can I do to make it normal again? Thanks in advance

    Looks like a bad HD for me. You need to check the bad sectors, which can be easily made to initialize with a linux LiveCD/USB and by running disk utility it. It will report on the SMART status of your drive, and I suspect that your HD to be riddled with bad sectors, ergo long boot time and BSOD.

  • Union all too slow for my query any alternative?

    Hello

    The following query prints the desired results. What I'm trying to do is to add to my query below is to also retrieve information from different dates (for example 01.01.2012 - 30.4.2012), more information below, but with 0 amounts. The only solution I found is to duplicate the query to a union and entry dates you want below. The problem is that, then the query is too slow.
    Any other recommendations are welcome
    SELECT s.trans_datetime,s.alloc_ref,s.accnt_code,s.treference,s.DESCRIPTN,sum(s.amount*(-1)) as amount,s.conv_code,sum(s.other_amt*(-1)) as other_amt,s.anal_t1,ss.descr,
    o.NTN_DESCR as flag,z.name as vessel_name
    FROM  accounts s, customers ss,vessel a,nation o, analysis  z,
    customers_anl_cat  z1
    where s.trans_datetime BETWEEN to_date('01.01.2013','DD.MM.YYYY') AND to_date('30.04.2013','DD.MM.YYYY')
    AND s.accnt_code=z1.acnt_code
    AND z1.anl_cat_id=17
    AND ss.ACNT_TYPE=2
    AND s.accnt_code=ss.acnt_code
    AND o.NTN_CODE=a.flg_code
    AND z.anl_code=s.anal_t1
    GROUP BY s.trans_datetime,s.alloc_ref,s.accnt_code,s.treference,s.DESCRIPTN,s.conv_code,s.anal_t1,ss.descr
    ,o.NTN_DESCR,z.name,z1.anl_code
    Thanks in advance

    794018 wrote:
    Thank you very much for your answers.

    Unfortunately, the lines of the new date in the amount and need to convert to 0 or null values

    OK... What is not eligible for a situation to replicate the query to use UNION all clause You can simply do more in select:

    Select  column_list1... column_listN,
    case when s.trans_datetime BETWEEN to_date('01.01.2013','DD.MM.YYYY') AND to_date('30.04.2013','DD.MM.YYYY') then s.amount
           when s.trans_datetime BETWEEN to_date('01.01.2012','DD.MM.YYYY') AND to_date('30.04.2012','DD.MM.YYYY') then 0
    end amount
    from table_names
    where (s.trans_datetime BETWEEN to_date('01.01.2013','DD.MM.YYYY') AND to_date('30.04.2013','DD.MM.YYYY') or s.trans_datetime BETWEEN to_date('01.01.2012','DD.MM.YYYY') AND to_date('30.04.2012','DD.MM.YYYY'))
    Other conditions Follow
    
  • What happens if my pc is too slow for Flash CS6? can I try (and find) old version?

    Hi all
    I tried the trial version Flash CS6 but my computer is too slow (less than 2 GB of RAM available) and I am not able to use it . I need to do animation cartoons and I have not need of order code to make... What do you recommend me, please? If I use an old version (the one who? ) Flash 8 ? is there a trial version on the site? ) It can work ? I mean I can what he valid for my works or is a point of against me for the market?

    I want to be sure before you buy the product...

    (what is the right place to ask?)

    Thank you anyway
    Adelina

    You can catch Macromedia Studio 8 on Amazon for $ 50. Flash 8 has a great under XP, a half decent machine should have no problem with this version. I remember that I ran with 512 MB of RAM on a Pentium IV.

    http://www.Amazon.com/GP/offer-listing/B000AQHMK0/ref=dp_olp_used?ie=UTF8&condition=used

    And you won´t find better freeware imo.

  • The video is too slow for audio, the file is .mp4, he recorded with my webcam with Toshiba Qosmio X 75 - A7170. Also sometimes audio rehearsals.

    Hello

    For videos when I record with my webcam on my Toshiba Qosmio X 75 - A7170 and then place it in Premiere Pro the video seems behind the audio.

    Stats on my laptop:

    Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz

    RAM: 16 GB

    System type: 64-bit

    Memory speed: 1600 mhz

    Hard drive: 1000 GB mechanical_hard_drive

    Graphics card: NVIDIA GeForce GTX 770 M

    Graphics RAM: 3072 MB

    Hard Drive rotation speed: 7200 RPM

    If the video is behind and, occasionally, for some reason, the audio will be repeat or even start again from what sounds are going on at the beginning.

    The file is saved with my webcam recording is .mp4. I don't know what else to say to halp please.

    The video file is played as usual when I use windows media player.

    I use first Pro CC v8.1

    Hi Bellebacon,

    You have variable speed of frame video. RIP to the handbrake and you will have a file, you can use: https://handbrake.fr/downloads.php

    Thank you
    Kevin

  • Replace the subset of table w/Shift Register too slow for my Application

    This is similar to other posts, but I have not found one that addresses the limitations of an approach of shift register.

    I have a part of an application that I'm turning to 500-1, 000Hz.  The process extracts a block of data from the ADC, and I need to store this data, then collects more of the ADC.

    I've set up what seems to be the bottleneck of the present in the attached .zip file.  When I run the attached code with profiling (see. PNG file), it tells me that it takes on average 3.8ms for the Subvi to run.  At this rate, I can only run around 260 Hz.  I have a Subvi similar to this in my code and the code can run at 1000 Hz without this Subvi, but slows down to about 160 Hz when it is activated.

    Is it possible that I may collect data about 1.7 KB tables and run at the speed I need?  Any input would be appreciated.

    For purposes of reference. Debugging should be disabled on the sub - vi.

    Looking at the code you provided - don't just disable debugging -! you have some other options of "exécution" to reset.

    This should speed up the Sub - vi SR will be your friend again!

  • Shortcuts for Photoshop CS6 brush size is too slow for my work

    Hi all, need help here.

    When we paint with Photoshop brushes (while seriously urgent works, especially since my boss is hunting...), we need more big brushes or to change small brushes, at such tense moment, I find the so so so slow [] shortcut and I can only click on the [] as hard as possible, I quietly shouting "come." faster... »

    So, is there a way to double or triple the speed?

    Thank you

    Instead of using the range keys, you use could the shortcuts below to change the size of the brush much faster.

    Windows

    ALT + right click, drag to the left or right

    Mac

    CTRL + Option + drag to the left or right

    It of the shortcuts above with any of the paint tools and drag left or right in the area of document

    Drag upward or down to change the hardness

    (you can change opacity in photoshop preferences)

  • Too slow for Skype

    We have an older NB300 of 1 month with 1 GB into standard. When you try to use Skype (battery or sector) Skype shows this computer runs slowly. We can hear people on the other end, but our conversation faints. This also happens on Skpe testing. All other programs are closed and switched to high performance.
    Any suggestions? Purchase of another GB of hard drive will help. Running Windows 7 starter edition. Thank you

    Hello

    Personally, I have never used Windows 7 starter. But I know, Skype does not require much Cpu resource to run. 1 GB installed memory is sufficient to run it. Have you tried using older versions of Skype?

  • HP 6029de RAID 0 too slow

    I changed my 6029de HP in RAID 0. But the writing speed is 30 MB/s.
    Is not too slow for a RAID 0 system?

    Will there be an update of firmware for it? or can I pay what?

    translated by google

    If you have changed from RAID 0 that normally you have to reinstall the operating system or run the recovery as far as I know and then try some points of reference.

    Also where do you see that read/write speed?

    It is when copying, cutting or trasnfer files?

    Mine appears lower than that and im current raid 0 and I can say it's faster and I do not trust fully the speed that Windows says it is trasnfering.

    It's even slower when you transfer to or from a usb device, which is normal.

  • DVD player is too slow on the Satellite A100-507

    the stack of reader dvd * a dvd - ram uj - 841 s my satellite a100-507 is too slow. (~ 1000 kb/s - far too slow for a movie - and it does not depend on the player.)

    specifications technical manufacturer is 8 x reading + writing for DVD, even I can write DVD up to 2.4 x

    is this a software problem? (I use Windows XP)

    Hello

    You are not able to watch DVD on your laptop, or what is the problem?

    I studied a bit and found a few player features:
    Maximum read speed:
    CD 24xMax
    DVD-ROM 8xMax

    Maximum write speed:
    CD - R 24xMax
    CD - RW 4xMax
    HS CD - RW 10xMax
    US CD - RW 10xMax
    US + CD - RW N/A
    DVD-R 8xMax
    DVD-R(Double Layer) 2xMax
    DVD - RW 4xMax
    DVD + R 8xMax
    DVD + R (Double Layer) 2.4xMax
    DVD + RW 4xMax
    DVD-RAM 5xMax

    So you info about 8 x reading + writing of DVD is not exactly true. It is based on the DVD.
    In addition, it is important to mention that these are the max values.
    Sometimes the drive reads or writes with a lower speed. It depends on the cache status.

  • HP Laserjet M1132 MFP is too slow on the network!

    Hello

    My HP Laserjet M1132 MFP is too slow on the network!

    I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

    I installed the last form HP driver site and update the firmware it the latest version.

    It happens on other Windows XP machines as well.

    I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

    I used the trick of local port on computers remote (instead of the normal method) like this:

    "add a local printer.
    "new port".
    "localport".
    \\XPcomputer\HPPrinterName port name

    but still nothing!

    There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

    I really appreciate your HELP!

    It seems that no one on the planet has the answer to this question!

    The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

    He wat the only solution for me.

  • dlow data transfer speeds

    Hey guys

    I'm the experience of slow (1.87 MB/sec) transfer speeds when transferred songs to internal memory of my sansa fuze. something wrong? and what people rates do you have with the internal memory?

    It's a rocket 4 GB microsdhc 16 GB

    Thank you

    Depends on the other end of the pipeline... your computer.

  • Slow transfer speed for USB 3.0 ports

    I have a USB 3.0 Seagate external hard drive connected directly to one of the USB ports 3.0 at the back of the computer with the cable that came with the drive. Whenever I turn it on, I get the message "this device can perform faster - this USB mass storage device can transfer information faster if you connect it to a USB 3.0 Super speed.

    I tested the speed of the hard drive and transferred on a file of 1.16 GB in 58 seconds of my drive "C".

    I also transferred the same file in the same place, for comparison, on a hard drive 10 years from an old computer which is now in a closed Chamber. This hard drive is also plugged into a USB 3.0 at the back of the computer with a USB 2.0 cable and the files had 57 seconds to cross.

    So that would mean that the Seagate drive does not work at the speed of USB 3.0.

    Can you please advise me as to how I can get the right speed for my USB 3.0 ports?

    DesF,

    You can check for a driver to chipset update for your system.

    Please keep in mind that it is a rotating disc and data transfer speeds do not match the theoretical bus speed. Certainly not the often claimed "ten times faster than USB 2.0! In addition, there a 5900 RPM disk, so a little slower there also.

    A tweak, you can try is to make sure that drive policy properties tab is set for best performance.

  • Slow transfer speed for EA4500

    Does anyone think that the transfer speed to send or receive files from a disk external HARD USB connected to the router is slow? Variable speed of 2 MB - 4 MB/s...

    The HARD drive is certainly capable of at least 80 MB/s if plugged directly on the PC.

    Is it supposed to be this slow or there is a problem somewhere that I'm not aware of?

    This sucks seriously... Thought that's supposed to be the top of the product line but so seems less if I had to compare with other routers high-end market that runs better, faster and certainly much cheaper.

    1 megabyte is 8 megabits. 1 MB/s is 8 Mbps and 8 Mbps.

    The 324 Mbps is only the connection speed, i.e. the frequency of signage. Actual throughput on wireless is much less, at best, about 50% of that. 162 Mbit/s is approximately 20 MB/s.

    Yet, I recommend to use a wired computer and check the transfer rate of USB drive.

  • Satellite Pro M70-113: the modem speed is too slow

    Hello

    I have a satellite pro m70-113 laptop.
    The problem is that I am not able to web surf, when you are connected to the Toshiba software modem that is integrated, because the speed is too slow.
    Connecting about 40 Kbps, but I can't even open the yahoo site just because it's very slow. I mean it seems that there is no data transfer... I have to wait 5 min load yahoo.com!
    I tried uninstalling, reinstalling the drivers, but the problem is the same...

    And on the same telephone line, when I connect to the net on my desktop, I get a decent speed. If the problem is not telephone line or my ISP, but something on my laptop hardware modem, or its drivers.

    Please can someone help me...

    Thank you, hoping for an answer...

    Hello

    Please check the maximum speed of the port and set it to the maximum level. You can find it in the properties of the modem in Device Manager.

Maybe you are looking for

  • What format should I convert my MTS/M2TS videos for?

    Hello Last Saturday, we (a group of 5 fans) filmed a full rock using consumer camcorders level festival. Required time, I wasn't the one to import the images, it's a friend who uses Sony Vegas on Windows 8. All the files he gave then to me (some 500G

  • Clone Stock HDD to new 850 EVO Pro - T440s

    Hi all I was wondering if there is a good tutorial somewhere on the right sequence of steps to successfully clone my HDD to the SSD Pro 850. I'm more curious about what had to be done before, during or after the process of cloning (AHCI?) the bios se

  • Gain setting NI LabVIEW RIO assessment Kit online.

    Hello I'm interested in using the evaluation package NI LabVIEW RIO for the implementation of a PID controller. I want to know if it is possible to adjust the gains PID controller implemented on this kit without putting an end to the operation in rea

  • can't connect to MSN premiun with quest

    I've been waiting with msn sales and support 1-866-205-6768. I have quest and want sign up for MSN premium. I can't sign in to MSN - say account is no longer available. But said registration extended til 7/15. It is poor.

  • Cannot connect wireless keyboard 700 v2.0, receive the error code 28.

    Original title: 700 wireless keyboard v 2.0 cannot connect to laptop Gentlemen. 700 wireless keyboard v 2.0 cannot connect to the laptop, after checking the Device Manager said that "the drivers for this device are not installed. (Code 28) «,