Toolkit and remote sql server DB

Similar Questions

• Failed to connect to remote sql server 2005

  It has problem connecting to remote sql server 2005 on the LAN (windows xp/windows 7). I had put firewall settings as don't port no 1433 for TCP/IP and everything, but does not connect with the computer on the local network

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

• VirtualCenter Server DBs on remote SQL Server

  Guys,

  I use VirtualCenter Server with a remote server of SQL2005 DB.  I initially set up with a domain account as the owner of the db and everything was pretty much ok, except that my VirtualCenter management Services continues to stop.  I was told that the best practice is to use local sql accounts and authentication as opposed to domain accounts.  I created connections local SQL, makes them owners of DB and then recreated the system DSN names on my server of VC.  I changed the log on credentials for the VC and VC management Web services for my domain account for the Local System account.  Now when I start the service I get the "Virtualcenter Server service stopped with the error service special 2 (0x2).»  I have cheked other messages and I made sure the Vmware converter service does not work.  IIS in is not installed on this server.  I saw the messages about failure fo the local system account to log on to a remote sql server.

  So my question is:

  If the VCDB abd UMDBs are on another SQL Server on the VC server do you need authentication based on the domain or local sql?  What references do service accounts must be defined on the VC Server?

  Thank you

  If VC and SQL reside on a single box, a domain account is recommended. If SQL is remote, it is recommended the SQL authentication, see Installation and Configuration Guide. This has always worked for me.

  As mentioned previously, VC must be installed with local administrator or service account (member of local administrators) and retain the same all along of...

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V).

  Please give points, so useful

• How to connect and access SQL Server data base of sqldeveloper?

  Hi all
  is it possible to connect and access the database of remote sql server using sql developer?

  Connect you as 'his' or as a normal user?

  When you connect as a normal user, this user has the tables or views?

• Update for Windows XP (KB2718704) and Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) will be without installation

  ORIGINAL TITLE: updates XP

  Update for Windows XP (KB2718704) and Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) will BE WITHOUT INSTALLATION

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. open Add/Remove Programs and make sure that Show updates at the top is checked (and leave it checked); then select the name in the box sort by on the right. Now do scroll down & tell me if ALL the other updates following up-to-date are listed?

  (a) KB2676562,262, KB2686509 & KB2695962KB2659;

  (b) KB2675157, KB2653956 & KB2621440;

  (c) KB2661637, KB2598479, KB2631813 & KB2585542;

  (d) KB2633171, KB2393802 and especially KB971029

  Most will appear as Windows XP security update , followed by the number in brackets.

  If IE8 is installed, two 2 will appear as a security for Windows Internet Explorer 8 update , followed by the number in brackets.

  5. is Firefox, Chrome or any other alternative browser installed?

  6. what version of Java is installed?  TEST HERE in USING IE (only!)-online http://java.com/en/download/installed.jsp

  7. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; CCleaner)?

  8 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  Note: KB2463332 is a update optional, not security. Feel free to hide it.

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• CF8 Enterprise and MS SQL Server

  I need to transfer a CF8 Enterprise application off the coast of a MS Access database to a MS SQL Server existing database/environment (I guess I'm technically Piggy-Back my database in an 'existing' instance). I created my database of SQL Server, responsible for access to the elders of the base and is now looking to connect to CF administrator.
  I get the "java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] [SQLServer] Login failed for user (null)". Reason: not associated with a trusted SQL Server connection. "error. I've filled in the id and password, which causes this error. I checked, and the properties of the server (using SQL Server Enterprise Manager) and the validiated defined for authentication (SQL Server and Windows) mixed mode, but don't can't get further.
  Any ideas?

  I was able to verify that SQL Server has been using authentication in mixed mode (both Windows and SQL Server), and that TCP/IP is enabled and using port 1433.
  I had to create an ID local within SQL Server and then used this combination ID / password in the configuration of the data source in the CF administrator And then Bingo, that worked.
  Thanks for all you suggestions and patience. Oh, and I also bought a book from SQL Server 2000 to help me get through the code changes required between MS Access and MS SQL Server.

• Comparing the data set of Oracle database local to the Remote SQL Server database

  Hello

  I have a table in an Oracle database that is gradually being updated with a table in SQL server through the database link. There is a field "Date of creation" in the table in SQL server that I used to find the newly created records and shoot and insert them into the local table to the Oracle database.

  Now the question is the documents/data in the SQL server remote can be deleted as well and I see a lot of files are already deleted and I couldn't find a way to capture the information of deleted data to remove from my local table.

  I tried

  SELECT id local_table

  where there is no

  (select * (or 1))

  of remote_table@database_link

  where remote_table.id = local_table.id).

  And I tried to replace not exist with no so.

  The problem is that the query is too slow with link of database for IN/NOT EXISTS clause NO. So, I'm trying to find an effective way to capture the lines deleted in the remote to remove as a result of my local table table.

  Any help is appreciated.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit

  Thank you

  Chrystelle

  It is perhaps easier

  Select pk / * or sustitutive key * / from Oracle.tba

  less

  Select pk / * or sustitutive key * / from SQLSERVER.tab

  This returns the rows that exist in Oracle but not in SQL SERVER-> delteted lines in SQL Server.

  Another way is to create a trigger to remove in sqlserver and track in a table delete lines.

  HTH - Antonio NAVARRO

  http://SQL1.WordPress.com/

• Remote SQL Server in WAN environment

  Hi guys,.

  As I read the reference guide questions are poping up.

  If I have a SQL Server remote acting as SQL Server my vc instance which is the best way to implement in a WAN environment with vCenter Heartbeat?

  Thank you

  Dougie

  Process is the same as if you protected vcenter via a WAN with heartbeat.  If you have a different IP address for primary/secondary, then you use the WAN option and provide IP addresses as required during installation.  The only difference is that you select SQL at the primary and secondary installation wizard.

  vExpert

  VMware communities moderator

  vmwise.com / @vmwise

  -KjB

• implementation of vcenter as VM / hosted on remote sql server 2005 database

  Hello

  I'm trying to set up a server vcenter for my view infrastructure. I configure vcenter as a virtual machine. Ive created the virtual machine ran updates this is joined to the domain. VM is win 2008 sp2 srvr. I want to install vcenter now, but the last time I experienced the steps that I received an error when you try to attach to sql server remotely.  SQL server is running Service Pack 3 to sql 2005 64-bit. should the db be created before installing vcenter? must the odbc connection be installed before installing vcenter?   Thank you in advance!

  chaz112182 wrote:

  . should the db be created before installing vcenter?

  Yes, and you must have dbo on the MSDB and the VCDB (to create rollup jobs)

  must the odbc connection be installed before installing vcenter?   Thank you in advance!

  Yes and tested.

• Training and tools SQL Server Business Intelligence 2016

  We are looking for a SQL Server installation where it serves as a data warehouse, performs work of the ETL data and provides information for Business Intelligence using dashboards, reports, etc. From my research, it seems that SQL Server 2014 had a specific edition of BI but for 2016 all BI tools are available in the Enterprise edition. Please correct me if I'm wrong.

  Is there a place to find the specific documentation about SQL Server 2016 BI tools and specific training?

  Thank you for your help.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  "The MSDN SQL Server Forums.

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• 9 error code and Microsoft SQL Server 2005 Express Edition Service Pack 4 (kb2463332) keeps failing

  Original title: error code 9

  Try to update Microsoft SQL Server 2005 Express Edition Service Pack 4 (kb2463332), but it keeps having omitted and error found code 9. Would you be able to help me fix this error

  Hi maricarocampo,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Alternatively, you can try to install the stand-alone package of updates verification.

  Check out the link:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=26435597-b28e-4568-9D16-017bdf47abdc&displaylang=en

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Documaker 12.1 Standard Edition and Microsoft SQL Server

  Does it matter which version of Microsoft SQL Server that uses Documaker 12.1 Standard edition and may documaker using the latest version?  Is there a particular version of Microsoft SQL Server that is running better with Documaker?

  Documaker uses ODBC for most SQL connectivity. The application is therefore probably not aware (and indifferent) with the specific version of SQL Server, you have installed.

• GLOBAL_NAMES and MS SQL server

  Hi all

  I need to know, in case we create a db link to MS sql server what should be the value of GLOBAL_NAMES?

  Are there restrictions? When we put true;  The db link works fine?

  Thank you

  Hi all

  @Jgarry: the length of the hs_db_name must be equal to or less than 8.

  Finally, I managed to make it work:

  Below the file init for the instance of SQL Server:

  HS_FDS_CONNECT_INFO = MyHost 1433/master

  HS_DB_DOMAIN = MYDOMAIN

  HS_DB_NAME = MASTER

  HS_FDS_TRACE_LEVEL = debug

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  ALTER system set global_names = true;

  CREATE THE DATABASE LINK 'MASTER. MYDOMAIN. "

  CONNECT to 'HIS' IDENTIFIED BY 'xxxxxxx '.

  With the HELP of "dg4msql";

  Select * from dual@"MASTER. MYDOMAIN';

  The last query works fine.

  Thanks for all your help and suggestions.

• Routing and Remote Access Server & VPN

  We have Server Windows 2008 R2, which is our domain, but also DHCP server controller. On this server we have Setup RRA for VPN and it works fine. We had to stop our DC due to a failure and after I got the domain controller to the top and it is a problem for users that connect to the VPN.

  When users try to connect to the VPN, it connects successfully. But they did not access network as usual. I looked in the VPN properties, and it receives an IP address of 169.254.xxx.xx which is not the correct network IP address. So while the user who is remote think they are connected, they are currently not connected.

  Does anyone have advice what is the cause of this and how to troubleshoot or resolve?

  Hello

  Given that you are working on Windows 2008 R2 please post your question here:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home