TortoiseSVN and LabVIEW to export the updated files programmatically the revision to another.

Similar Questions

• I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

  I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

  You may not have lost any resolution... or you can understand the word "resolution" bad

  Resolution isn't the file size, which are the numbers you are quoting. So the 1.3 MB changing to 542KB does not indicate a change in resolution. If you export the picture and let the box that says "Resize to Fit" disabled, so you don't waste no resolution at all, even if the file size has changed.

• Export the database from another pc - problem EXP-00056

  Hi all,
  
  I have a pc (called PC1) with installed Oracle11gR2. I want to export the database from another pc (called PC2) which is connect with PC1 with a LAN.
  I have connected PC2 to PC1 so:
  $ ssh oracle@IP_of_PC1
  
  and as the user oracle, I tried export then:
  index of the_user/the_pass exp = y subsidies forced is y = y line is my_dump.dmp log = my_log.log
  
  but he said to me:
  Export: Release 11.2.0.1.0 - Production on Tue 7 Sep 14:44:13 2010
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  EXP-00056: ORACLE error 1034
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  EXP-00005: all authorized logon attempts failed
  EXP-00000: export completed unsuccessfully
  
  Why it does not work?
  
  Thank you much in advance.

  Run this and show me where exactly you run

  index italia/italia@dbSID exp = y subsidies forced is y = y line is dump070910italia.dmp

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• My mac has crashed and need to transfer the app to another computer.

  My mac has crashed and need to transfer the app to another computer. How do I do that?

  You do not transfer, you are doing a new installation

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Export the selection to another library

  How to export a playlist from my library of music of Christmas to my main iTunes library. If I select the Playlist Playlist/file/library/Export, everything seems to be able to do is export to a text file.

  My iPhone is synced to my main iTunes library. I don't want to sync with my library of Christmas and loosing what I have synced the main library.

  Any help appreciated.

  Hi there joe Gramm,

  Looks like you want to export a playlist and songs in the playlist to copy on your main iTunes library. There currently not automatically a way to achieve, therefore, export the files manually. Fortunately, the process is quite easy.

  1. export the playlist you used in a (preferably empty) folder on the desktop

  2. in your Christmas library to open the playlist

  3. click on Edition > select all to select all of the content in the playlist

  4. drag items highlighted with the playlist file to copy

  5. open your main library

  6 import your playlist (file > library > Import Playlist)

  7. then import your music in the folder that you faced them with file > add to library

  Who should add the playlist and songs, so that you can synchronize with your phone. Thank you for using communities of Apple Support, happy holidays!

• Is there a way to export my usernames and passwords stored in the import in another computer?

  Recently, I've migrated to a new computer. I wonder if it is possible to move the stored user names and passwords that I have on the old machine for the import on the new machine.

  See:

  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • Password exporter: https://addons.mozilla.org/firefox/addon/2848
  • http://KB.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords

• When I subtract two numbers DBL and try to compare the result with another DBL, it fails

  I found a curious problem with subtraction and compare numbers DBL in LabVIEW (8.6). Here's how it works:

  1. subtract two numbers DBL such that the result is not incorporated. (Say, 3.2 - 3.1)

  2. compare the result with a constant/control that is on the result of the subtraction (in the example, 0.1)

  3 see the output of the comparison.

  If the result of the subtraction is an integer, the Boolean result is (as expected). If the result is not complete, the comparison fails.

  (Now, if I simply compare two floating point numbers, it works, so the issue is not with the node comparison itself, but with the data that is entered to the node). Can someone understand why this happens? It's unexpected, it's a pretty serious bug.

  It is provided with all programming languages. Numbers do not have an exact binary floating-point representation. This has been discussed endlessly. Never use the equal function with floats. You can use the function in the range and force.

• Click on the thumbnail and load enlarge them the image in another space reserved

  Is it possible to click on a small image to load a larger image and another one in a placeholder adjacent image without using a flash object.

  I tried _parant, _self and _top, _blank without success targets.

  If this can be done without flash, please give me some advice or point me in the right direction.

  I use CS3.

  Thank you

  Barrie

  Here's a simple option

  http://DreamweaverResources.com/tutorials/set-text-of-layer/

• I bought anytime windows Pro and now I have no update update file and cannot download add-ins

  I bought anytime windows Pro and now I have no update file to use to reload my OS and you can't download XP, I have no ID and product with no files, I paid $90 for nothing (need copy paper)

  I'm tired of trying all the fixes.

  There is no way of contacting microsoft without having to pay a tax to support!

  Can I get credit towards a full copy of windows 7 pro

  What was the original version of Windows 7 you have before using the "upgrade" Anytime   Whenever the upgrade cannot normally upgrade to XP.  It simply allows the upgrade of Windows from a lower to a higher level:

  Home--> Home Premium---> Professional---> Ultimate.

• Export the project as a SCORM 1.2 file

  Hello.

  I created a project with different resources and now I export the project as a SCORM 1.2 file.

  But do not find this option.

  Is it possible to publish this mode of the project?

  I use 9 Captivate

  Thanks for help me.

  Yes, (I use 8 Cp) select Preferences in the Edit menu, click the entry to Reporting in the Quiz section, and check the box for "Enable Reporting for this project",

  

  under the Standard drop-down list, select SCORM 1.2 and click on configure.

  Define identifiers, securities, and the fields of description for something unique for this course:

  

• Different behaviors in MAX vs LabVIEW when writing the attribute IMAQdx GigE

  Hi, I'm controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a few quirks with interface we are image acquisition without a lot of problems at the moment.

  However, there are one or two issues that are confusing.  In this case, it is possible to set a MAX attribute (an attribute of command that tells the device to perform the internal calibration), but when you set the attribute in LabVIEW, the error 0xBFF69010 (-1074360304) unable to create the attribute is thrown.  See the attached images.

  I check if the attribute is writable before making an entry.  It is, however, the write failed, and read the iswritable attribute and then returns false.  In MAX, I can write to this attribute with no problems.

  I have to set up/read/write in my LabVIEW code that makes MAX.  MAX writes all the attributes (based on the values in the XML file) when he opens the camera or he reads simply all the values of the camera.  When LabVIEW opens a reference camera does perform the same steps that what MAX - I'm trying to figure out what could be the difference between MAX and LabVIEW, which might be the cause of this behavior.

  Any help will be appreciated.

  AnthonV wrote:

  Hi, I'm controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx.  Apart from a few quirks with interface we are image acquisition without a lot of problems at the moment.

  However, there are one or two issues that are confusing.  In this case, it is possible to set a MAX attribute (an attribute of command that tells the device to perform the internal calibration), but when you set the attribute in LabVIEW, the error 0xBFF69010 (-1074360304) unable to create the attribute is thrown.  See the attached images.

  I check if the attribute is writable before making an entry.  It is, however, the write failed, and read the iswritable attribute and then returns false.  In MAX, I can write to this attribute with no problems.

  I have to set up/read/write in my LabVIEW code that makes MAX.  MAX writes all the attributes (based on the values in the XML file) when he opens the camera or he reads simply all the values of the camera.  When LabVIEW opens a reference camera does perform the same steps that what MAX - I'm trying to figure out what could be the difference between MAX and LabVIEW, which might be the cause of this behavior.

  Any help will be appreciated.

  Hi AnthonV,

  "Weird" is a good way to describe the Spyder3 when it comes to the GigE Vision/GenICam interface (as opposed to the Dalsa driver that communicates using custom commands via ethernet camera series)...

  The Spyder3 has many questions focused on the calendar. It is possible that the time between the opening of the camera and the setting of this function is different by MAX vs your code in LabVIEW. In addition, there are some cases where MAX will be deletes the error to display. Ignoring the error indicated vs you see the feature to take effect in both cases?

  The base between MAX and LabVIEW behavior is the same. In both cases when you open the unit all parameters are responsible for our camera file that has the registered device settings. This file is created the first time that you open the unit and are updated every time you click on save to MAX or call an API function to save the settings. In any case, I know that the Spyder3 has various questions backup/restore the settings of our camera files.

  I suggest talking with Dalsa on the issues you are experiencing. They might be able to put up with a newer firmware that addresses some of these issues (we have worked with them in the past to identify several of them).

  Eric

• How to export the graph xy with indicator field.

  Hello

  I want to export my chart to the .emf format. For this I used call node > image export. If I use this, I can only export the chart not another indicator filed(numeric_and_string_indicatror).how can export chart with flag field?

  This is .vi I used.

  Thanks for your post in our Discussion Forum,

  is it necessary to export the image to the .emf Format?

  If not, I can give you two options:

  The best way to make a screenshot of a certain area of the façade is of

  create a Subvi with all the items you want to take a screenshot of and

  Then take a screenshot of the entire façade of the Subvi.

  It works fine even if the front is not visible, while the photo is taken.

  The screenshot can be taken with a method node as in the example attached to this post.

  Another possibility is to reframe a screenshot of an entire façade to the region you are interested in.

  How this works is described here: http://forums.ni.com/t5/LabVIEW/take-screenshot-of-part-of-front-panel/td-p/1613750

  The downside is that you must manually set the region that could change because of the scrolling or changes on the Panel.

  Best regards

  Peter

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• iPhone delete contacts one by one and sending messages to the wrong people

  I have two problems with my contacts that become very cumbersome and no solution, that I could find online.

  Problem 1: a few contacts per week disappear from all my devices, which are synchronized to the top through iCloud. Accordingly, my message thread is largely of numbers and I must discern who everyone is. It is even more difficult to start a new conversation. iCloud is the only place where I store contacts and return to a backup does not help because it will just remove contacts more next week, in addition to losing those that I added since the backup. Usually, it deletes the contact while I am SMS with them, so I saw the name change to a number several times.

  Problem 2: Sometimes I have a person text and it will send the message to another person. It's very strange. I can even make this text a number rather than a name, and it will be text number of the other person. This usually happens between a couple husband and wife, or two people who work in the same place.

  I use Messages to communicate a lot for work, and it's quite get in the way. It is quite complicated to get me out of the entire Apple ecosystem, which I'm deeply rooted in the, because it prevents me from communicating with people and to get anything done. Yet I can find no solution online and have not read even where Apple recognized the problem.

  Please help and please tell me that the next series of OS updates will solve this problem.

  It is certainly a strange phenomenon!

  Have you tried to log in to your iCloud account, then back away from logging in?

  Or perhaps reseting your device - restart your iPhone, iPad or iPod touch - Apple Support