Toshiba 3.5 "3 TB USB 3 to HDD - unable to create partition using Mac OS

Similar Questions

• How to make the partitions using the toshiba restore CD

  Hi forum users. I just want to explain more on creating partitions using our Toshiba Recovery CD. I have a portable satellite A50-101.

  I searched some topics on this forum and found this post from Quad. Just follow these steps carefully and you'll be successful to make the partitions on your hard drive.

  Here is the message by Quad.
  ######################
  Hi forum users

  If anyone of you needs an accurate description of installation of operating system using Expert mode, maybe this can help you.

  When the recovery process has begun there are menu where you can choose between two modes of installation.
  1 standard mode
  2. expert mode

  At first he put there important warning: all data stored on your computer will be lost. It is also important that hollow a Standard installation partition will be created and all data on the hard drive will be lost.

  If you want to install the operating system on a partition, please use Expert mode. In this case, the software can be installed on an existing partition. Alternatively, you can make one by yourself.

  If you want to make a partition with a set capacity, please do it on this path:

  1. choose number 2 Expert mode pressing
  2 approve OK key ENTER
  3. choose LOCAL > DISK > image
  4. look in: must be selected for the CD-ROM drive
  In the Middle window choose GHO file and press ENTER
  5. using the TAB key you must mark the player information and so on and press ENTER
  6. using TAB button again part brand of window average (blue line) and with SPACE activate new dimension box
  7. place inside the new size of the partition and press ENTER again
  8. the question to continue with load disc? confirm with OK

  I hope this can help you to make the desired partition size.

  Good bye
  ######################

  At step 6 above, enter the size of the partition you want. Size must be entered in megabytes (MB), gigabytes (GB). (mine is 40 GB HDD, i.e. 38146. I go to half, 19073)
  Proceed with the disk load? Click OK.

  It will now recover your machine to its factory setting. 2 partitions will be made.

  Once the restore is complete, open my computer. You'll see only drive Local (c) on hard drives. Click on properties and you will see that the size that you specified in step 6 above (20 GB). So, where's my other 20 GB? It is a way to treat 2 to make a new logical drive.

  Follow this link: (these links has screenshots for easier understanding)

  http://www.theeldergeek.com/hard_drives_07.htm - create an extended Partition (step 1)
  http://www.theeldergeek.com/hard_drives_08.htm - create logical drives in an extended Partition. (Step 2)

  I hope this can help you make a new logical drive in an extended partition. :)

  Hi 012

  Thank you very much for your posting. I forgot to mention that the logical drive must be created because the unusable space do not appear by Windows.

  But there are users like you to help. Respect!
  Fashion Expert recovery procedure section is now perfect.

  Good bye

• Key USB Bootable Bootcamp could not be created

  Hello, I am trying to install windows 10, I downloaded the iso from microsofts website and already got bootcamp on my USB support software, I tried to install windows with iso 10 but it says "Usb bootable stick could not be created" then under it, he says that he only supports versions 7 or later version of windows , so I assumed it was my iso image, so I Re downloaded and it did not work, I did remove and eject my time of mutiple iso image, reboot, I thought maybe I should reinstall bootcamp but know too much what the problem is. Help, please!

  Hello hawkstrattus,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to install Windows 10 on your MacBook Air. From your post, I see you're under OS X Lion mountain. Windows 10 requires OS X Yosemite or later. You can upgrade your software on MacBook Air. The following article contains additional information about the system requirements:

  Use 10 Windows on your Mac with Boot Camp

  Best regards

• I bought a 32 GB USB CRUZER EDGE today. I can't use it (RAW problem)

  I bought a 32 GB USB CRUZER EDGE today. I can't use it.

  USB is in RAW format and I can't format it.

  How do I do for change in NTFS or FAT32?

  Bring (or send) back. It must be formatted in FAT32.

  But before you do, just check that the problem is with the drive itself and not your computer by trying it in another USB port and another computer.

• Question of Toshiba AT10-r: charging: mini-usb connector port is broken

  My tablet to-10A is plu 1 year bit (expired warranty then). It will no longer charge. I have already answered a few messages in the forum that indicated similar problems. Let me continue on another where I can give you a few other updates.

  There is no need to do the "factory reset" procedure because it is a hardware issue. (I have done, but as no change provided).

  I opened my Tablet and tested with a multimeter. It seems that the mini-usb port is broken (see the attachment, the 5v PIN is not in good shape), basically I don't have 5 volts there. Precisely the mini-usb port is part of a small circuit hannstar e89382 arc10L_usb_sub. That's what it should be changed. I tried to get him, but I can't find one.

  Toshiba allow this component?

  Any other idea of the people in the forum? I saw a new mini-usb port of welding, but it won't be easy, at least not for me.

  Best regards
  Luca

  Luca,

  The EU standard warranty is 2 years, but in your case I don't know how the USB port is broken. Toshiba will have to fix if it proves to be a part of the defective material. Give it a try.

• Problem with Toshiba E.Steel HD 500GB USB 3.0

  Hello guys, yesterday I bought a Toshiba HD 500 GB USB 3.0 e.Steel but I have a problem, if I connect the HARD drive to the USB 2.0 to my laptop hard drive works perfectly, but if I connect to the laptop on the USB 3.0 detects the hard drive (sometimes) and it only works for a few minutes , but if I copy files from drive is disconnected almost immediately... you think it's a problem with the HARD drive or the laptop?

  I have a laptop qosmio x 770 with a one month old
  USB 3.0 port works perfectly with any other USB 2.0 device
  I have the latest driver
  I have windows 7 64 bit

  > I have the latest driver
  > I have windows 7 64 bit
  The latest driver do you mean exactly?
  Are you using the original preinstalled Win7 you have with your laptop (factory settings)?

• Toshiba L4353 39 "- play movie USB problem"

  Hello

  I recently bought a Toshiba L4353 39 "smart tv, reading the usb works, but I continue to have this very annoying problem.

  basically I view a video file and all right and then no reason playback of the file stops and I'm back on the screen of my content, this has happened on several films and have tried a few different HDD so I can only assume it's the TV, help?

  Thanks, Martin

  Have you tried playing movies using a USB HDD or USB flash memory key?

  This question seems to play films supporting the different file format?

  In the [Manual user 89 page | http://www.toshiba-om.net/LCD/PDF/English/L4353-323950-English.pdf] you can find information about the compatibility of files
  Please check if video files are encoded correctly and use the audio and video codec supported

• Drivers Toshiba Satellite C850D - 10 H USB 3.0, can find anywhere

  I recently bought a new Toshiba Satellite C850D - 10H (model number: PSC9UE-005005PL) and installed Win 7 86 ultimate x, but I'm having a problem with USB 3.0 drivers, I can't find anyone working.

  I have looked everywhere, downloaded a few, but not worked. Also I can't find any driver on the official page of this laptop in the Toshiba site.

  Can someone give me a hand? A site or a source that I can download the drivers for this laptop?

  Thanks in advance and sorry for my English.

  Thanks for sharing!

• Problems Toshiba Ex - 320 GB HD usb 2.0 + unknown device.

  Windows XP pro Sp2
  AMD athlon 64 3500
  2gig ram
  200 GB WD HD Sata
  PCi-E 6800 GT MSI
  ASUS A8V-E Deluxe Mobo

  When I tried this out of the box, it worked fine, I can transfer files and everything, problem was that it would connect to usb 1.0. So I checked the bios the usb options have been enabled, I unplugged all the usb cables, I tried different usb, always usb ports 1 only. Ive tried to reinstall the drivers for the mobo cd and the official site. Still connected in usb 1.

  So I re installed Service pack 2, since then windows guard see the HD as unknown device now, and I can't access the HD. So yah SP2 makes things worse. I thought a restoration system, but since January 1, my previous save points seems to have disappeared.

  I can't find any drivers associated with this product on this site... Its a Toshiba 320 GB USB 2.0 external hard drive.
  Ive also tried going into win xp in safe mode, remove all controllers and usb devices, restart in normal mode, wait 5 minutes for the reconstruction of the database, then plugged back in the ex - HD, said peripheral unknown. Ive tried to update driveer with windows looking for me and myself to the research in the win xp cd and the file I386 etc..

  Hmm help?

  I intend to format my HD in a few days anyway, but I'd like get this working before cela ex - HD.

  Hello

  In my opinion, you will be very happy if someone has experience with the same question as yours because I noticed that on this forum there are a few discussions on laptop and different problems.

  Have you tried to uninstall SP2?

• Cannot write to Toshiba TransMemory - MX 32 GB USB 3.0 stick

  Hello, I have a USB TransMemory Mx 32 Gb but I can't copy on it.

  Write protection is turned on and I can not disable it.

  Even if I am able to remove it, I start copying files and back protection and blocking the transfer.

  Could you help me mlease?

  This flash memory stick does not support special mode "write protection"...

  If you are not able to write data to this device, I recommend to format the flash memory stick using the data NTFS file format.

  If you will not be able to format the flash memory, so I guess this stick must be defective and maybe you need to replace...

• Toshiba excites AT10LE Pro supports USB HOST?

  Clearly, I need to know if this tablet EXCITED AT10LE-A-108 supports usb host I can't get any information on the web...

  anyone? Thank you

  Sometimes a user manual control can be useful :)

• Toshiba LED 32PU201 cannot detect USB

  Hello

  These last two days my 32PU201 LED TV does not detect the USB key. Options Media Player to play movie, photo and music are all disabled. Please advise.
  Kind regards

  Deepesh

  Reset the TV back to factory settings to load the default settings.
  I guess you should find this option in the configuration menu.
  If it won't work, I guess there is a problem with the hardware of s TV

• Toshiba 1 TB 3.5 "USB external hard drive - I erased the disc

  Could someone advise please if it can be restored?
  I just bought this drive. Never had before.

  Copied the pdf instructions before formatting the drive to NTFS, but I forgot to copy the rest.
  Would you call it say that the drivers or the operating system can be downloaded from the Toshiba site.

  Thank you

  You don't need drivers to access the external drive, its plug-and-play :)

  If no drive letter appears, check its partitions in disk management (Control Panel-> Admin Tools-> _ computer management > storage)

• Port USB of the Satellite L30 stop Windows when using

  I recently bought a Satellite L30 (psl33E) for my wife and everything seemed fine. That was until she needed additional usb ports for his stuff and used the port on the left side of the machine (as opposed to the one still in use, in the back). As soon as she tried to use this port in particular, the close dow and has done since then.

  Could someone tell me please how to fix this, because it is only a few weeks old, and I don't want to take it back to the store where it was purchased.

  In the hope of a miracle.

  TIA.

  JimmyMack.

  Hello

  It really looks like a serious hardware problem. I guess that the USB port cannot deliver enough power when other ports are in use.

  If I were you I bring the machine or contact the nearest available service partner in your country and allow them to correct this problem.
  Here´s a link to find the closest of the ASP available in your country: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  See you soon

• Laptop Toshiba with Windows 7 Home Prem OA: damaged HDD / Act. key / No boot DVD

  Hello world

  My Toshiba laptop (Satellite P855-S5200) broke down and Im forced to replace my hard drive. As this laptop came with a preinstalled window, I don't have any starting device to activate my Window 7 Home Premium 64-bit again.

  The sticker on the back of my laptop said: Window 7 Home Prem OA.

  (1) what it means? What is the difference between mine and a regular version of window 7 Home Premium?

  I researched and found "X 17-58997 ISO» (2) it work to activate my Window 7 Home Prem OA? My laptop says 'X 16-96072' (3) I want to say I find that version to work for my laptop? If Yes, where can I find it?

  If I want to switch to Window 7 Professional How can I do? Can I just buy a Window 7 Professional Windows and install it?

  Please help! Greatly appreciated!

  If Santanu suggestion is not viable because your PC is no longer under warranty then try the following (and Yes you touch will activate Windows that you install Windows 7 Home Premium).

  (1) download the Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  SHA1 hash: 6071B4553FCF0EA53D589A846B5AE76743DD68FC
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
  SHA1 hash: 6C9058389C1E2E5122B7C933275F963EDF1C07B9

  (2) after downloading the correct .iso file install HashCalc and validate the SHA1 hash value
  is correct. If the download is not corrupted, the value HashCalc returns will be the value of SHA1 I posted.
  HashCalc: http://www.slavasoft.com/hashcalc/index.htm

  (3) then use ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates both maax) of updates at the same time
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com