Toshiba 32 GB Flash Drive and locking software for Ubuntu

Similar Questions

• How do I backup on my remote Toshiba or a flash drive

  I can't select a remote control for the backup.  I don't see even what is on the files, because they come empty, which I know is not true.  This computer is new, but programs should be the same!

  I'm not particularly computer literate, but performed this task on my old computer, so don't understand the problem.  The only available backup method is 6 CD.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum meets for a windows problem reports. I know that I was very impressed when I tried it. Three I'm familiar with and like Norton Ghost (which I use for 8 years no 1 problem), Easeus Todo Backup free, you can download it on http://www.todo-backup.com/products/home/free-backup-software.htm and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com . You can get Ghost for almost nothing (like me), if you look at the sales.
  The March 2012 issue of PC World has been very high on the program FREE of Easeus and CNET.  From my experience with a variety of configurations, I must say that I am very impressed.  As Ghost will support up to a network drive and it will create a bootable CD for when your PC does not start.  See comment by CNET of it to
   http://download.cnet.com/Easeus-Todo-Backup-Free/3000-2242_4-10964460.html?tag=mncol;1#editorsreview .
  -
  CNET has a lot of reviews of backup program to
  http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).
  -
  External hard drives are the best for backup. You can get a 500 GB one for about $65 a 1 TB for about $80. You can also buy a flash drive of 32 GB for less than $20.  It is the best insurance you can buy ever!

  -
  I hope this helps.  Good luck

• I would save firfox to a flash drive and install it on another PC. How can I do this?

  My father who is in the laws Internet Explorer crashed and I would like to install Firefox. I can't access the internet from their PC to do this. How can I save to a flash drive and install from there?

  Get the latest version from here and run the installer on new pc

  • getfirefox.com

• use a flash drive, and now it is frozen on the main screen.

  have a g7 United States 1150 laptop pavilion

  Windows xp

  put it in a flash drive and its deadlock on the screen, even after we out took it. tried rebooting twice and restarted, but it won't let

  .

  Help

  NO, I COULDN'T IMAGE TEXT OFF THE SCREEN. I COULD CLOSE.

  BUT IT TURNS OUT THAT MY DAUGHTER SHOULD OF SAVED AS SCREEN SAVER. GOT RID OF HIM

  THANKS FOR YOUR RESPONSE

• Accidentally, I've moved my documents to a flash drive and remove the flash drive. Are they still in my computer somewhere?

  I have accidenally moved my documents to a flash drive and then deleted from the flash drive. Are they in my computer somewhere?

  You may be able to recover from the computer or the flash drive using a program like Recuva file recovery.  For the best chance, do it immediately, before doing anything else on the computer.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• SanDisk Extreme USB Flash Drive and SMART failure

  I just got 3 64 GB SanDisk Extreme USB Flash Drives and all three show SMART failures to reassign bad sectors. I struggle to believe that all three could be bad on first use. I use a program on a Mac (SoftRAID(4)) to certify all drives prior to use, including the SD cards and USB keys. I've never seen a failure so far.

  Readers see the successful certification but present a SMART failure.

  What is a disk problem or a SMART question or what?

  Thank you

  Lief

  I agree that it is unlikely to have failed on the first use. Most likely, it is a problem with the SMART attributes. IIRC sandisk can't CHIP for this product so it formats without error, and data can be copied onto the discs with success, I wouldn't worry too much on this subject.

• is there anyway that I can simply download a VPS Windows version on a disk or a flash drive and reinstall the OS in this way?

  Original title: Windows Vista Edition Family Premium Situation!

  So, my desktop came with Windows Vista Home Premium, which I didn't know until about five minutes when I tried to use a password reset and it came with an error message. Being a little smarter I have myself give credit, I found that the password reset I used (I had gotten my laptop) has been installed only for Windows 7 because it is the operating system on my laptop. I have no idea if the office came with a disk recovery or not, since my mother bought the display instead of in the box as most of the people get it. I can't get to the desktop because my mother has forgotten his password and is the administrative account and this is the only account available. I decided that I need to reinstall Windows Vista Home Premium to the computer but I don't want to buy a version of it, if I can't, anyway I can just download a Windows VPS on a disc or flash drive and reinstall the OS in this way? Or do I absolutely have to buy a new version of Windows?

  Hello

  There is no available legal vista download.

  And you make a reset disk on that machine, not another machine and make you before you forget the password, not afterwards.

  If this is not applicable, you must reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  __________________________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• Problems with the flash drive and ReadyBoost

  I just bought a fairly expensive 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Monday, January 5, 2015, 17:34:53 + 0000, TheJimObasa wrote:

  I just bought an expensive ther 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Not an answer to your question, but let me point out the following:
  unless you have very little RAM on your computer, ReadyBoost is
  useless and will do nothing to improve your performance. Use of the
  drive for something else.

• Plug in a flash drive and get a bluescreen partmgr.sys

  I used a flash/usb drive in my HP probook 4530 s before.  I just bought a new lexar 4 GB Flash DRIVE and pluged in there.  As he was installing the driver, the laptop shown with an error partmgr.sys blue.  The laptop is only one month.  I am running Windows 7 Professional.   I tried to uninstall, delete the registry and reinserted it.  He still blue screens.

  I plugged the same flash drive on a dell optiplex running windows 7 Enterprise, and it worked fine.  It's obviously something with my laptop.

  Any help would be appreciated.
  Thank you
  Jake

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.

• Can I save a document to a flash drive and bring it into a store and print?

  Can I save a document to a flash drive and bring it into a store and print?  or my document still has to connect to the internet to print?

  Well Yes, the flash player works for me.  Just make sure that the images are in a format that store recognizes, such as jpg. Many shops (most?) don't recognize the psd format.

• Windows 7 Pro x 64. uninstall a bad driver or other software for a 600F Canoscan get this error message: "this program is for Intel 32-bit compatible platforms only.

  I have Windows 7 Professional x 64.  I'm trying to uninstall a bad driver or other software for CanoScan 600F Flatbed scanner.  When I try to, I get this message: "this program is for Intel 32-bit compatible platforms only.  The program will be left. »

  It is therefore impossible for me to uninstall.

  I downloaded the 64-bit driver appropriate and installed, but that did not help: Windows does not recognize the existence of the device.  I guess that, until the messed up bad software is uninstalled, I can't install things right.  I managed to uninstall the good driver, but the wrong software is still there.  It appears in the list of programs in the Control Panel, but can not be uninstalled.

  So, how one uninstall when this message?

  (signed) Dennis G Drury

  Thank you, Kevin.

  Dennis G Drury

• Hi, I need touch screen turn on and off software for my dv6

  Hi, I need touch screen turn on and off software for my dv6

  You can find all the software, drivers, information available for your model by using the link at the top of this page titled 'Support & Drivers'.

• I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer.

  Original title: Canon i-SENSYS MF4450

  I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer. It was fine when I used windows xp in my old computer. But now when I bought a new one, who have Windows 8 (x 64), I don't know what to do.  Please help me!

  LFF

  Have you tried to contact Canon for a compatible driver?

• OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

  Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

  Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

  Thought I would give it another chance: I've done the following:

  Ran L4uninstall.bat

  American ran Care System: registry clean and disk cleanup

  Connected accessories/tools disk cleaning system

  Restarted

  Insured that lates version of Adobe Flash Player has been installed

  Latest version of the software downloaded to the printer

  Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

  Restarted

  A ran another check of the register with the American healthcare system

  Ran disk clean again

  Off DSL modem

  Firewall and AntiVirus disabled Norton

  Restarted

  At installation of the printer as follows: first of all installed drivers

  Restarted

  A ran the remaining printer one by one with Solution Center last softerware

  Restarted

  Is surprised that Solution Center has worked without problem