Toshiba 32PU200EJ - HDMI port does not signal

Similar Questions

• HDMI port does not work

  Original title: HDMI port stopped working after the update.

  This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

  I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

  Update your BIOS can help you too.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

  Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

  • HDMI port does not when I connect the laptop to my led tv
  • In the windows operating system sleep mode is dissappers.
  • On the start menu, the language is Hindi

  There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

  Hello

  As mentioned above, restoring Windows 8 will allow:

  http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

  Good luck.

• HP Pavilion dv6 Notebook PC: HDMI Port does not

  I updated my Windows 10 operating system and since that time the HDMI port did not work to my TV. This worked fine before the upgrade. I deleted the Intel drivers and installed the chipset as recommended on a previous post.  I tried another cable. It did not work.  The message on the TV is No Signal.

  Hi @Saxnot, @muzza180,.

  HP has worked closely with Microsoft on the development of Windows 10 and drivers for graphics cards. Currently there is no driver available for your system. You can try and check at a later date, because I see new drivers all the time.

  Thank you.

• Satellite Pro P300 - output HDMI port does not

  Hi all

  Well it starts to drive me to distraction and Im hoping that theres someone who can put me out of my missery lol.

  I tried to connect my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable that I use for my PS3 but the connector does not simply. I keep finding all these messages in various forums saying how they can't get the HDMI connection... that would be great, at least, this means that they were connected.

  Are there different links for the HDMI? The one I have is diagonal connector but the port on the laptop is more square and just doesn't fit. So, if it is not a connector, does that mean I have a funky port on the laptop.

  There is also the issue of connecting my laptop to my amp which controls the surround sound system. Which link is best to use, as there is no real connections audio output?

  See you soon

  Hello

  Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
  Maybe you can also post a picture of the HDMI port. Normally there is no different HDMI port, all have the same physical size.
  I m PS3 not owner, but maybe he has a special connector. Have you tried another cable?

  Regarding the audio connection I use the normal line of output port to my external speakers. Have you tested this?

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• Satellite R830 - HDMI port does not work

  Hello

  Is there a driver for the HDMI for the Satellite R830 port?
  It is no longer connects to a TV.

  I tried different TV but still nothing.
  Also there is no HDMI in under the control panel Device Manager, should there be?

  Thank you very much for any help or advice.

  Hello
  I put t know what Windows system that you use on this laptop, but the driver HDMI isn't available from the HDMI port driver is part of the system and should be recognized automatically.

  Capacity Audio HDMI you need to install the right audio driver and should allow this in Control Panel-> sound-> playback device

  HDMI (digital out) would be not listed there, right click and choose:
  Show devices disabled, view hidden devices.

  Usually the HDMI connection isn t very delicate. Everything should run automatically.
  Connect both devices with a HDMI cable.
  Turn on the TV, then the computer.
  Now, use the exit function FN (key) video combination in order to get to the video (HDMI).

  Note: the correct HDMI channel must be selected on your TV

  All that s

• Satellite C855-29N - HDMI Port does not

  It was working perfectly before but now when I try the computer makes noise and seems to connect to the tv but there is no signal to my TV?

  I wonder if it is a driver problem, but it looks more like a faulty connection which means that it is gone forever? :/

  Pressing the function key F4 (Fn + F4) should change the screen output.
  It does not work. Right?

  Could be interesting to know if the graphics update driver / new installation would change something here have you tried it?

  In the worst case, you will need to recover the laptop back to factory settings to check if its hardware or software related issue and I think that the problem of software.

• Aspire Z5771 - Windows 7 64B - HDMI port does not

  Hi, recently I had to format my internal hard drive and reinstall Windows 7 using the DVD that I created with the ACER Recovery program.

  My front HDMI port worked perfectly, and I had just to plug something into the port so that everything is on the screen. This isn't what I have now. It seems that my tablet is not longer detected by the HDMI port and nothing appears on the screen.

  Can anyone help please?

  Thank you

  Try to install these drivers:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_8.15.10.2462_W7x64_A.zip?acerid=6345659...

  and

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_NVIDIA_8.17.12.7570_W7x64_A.zip?acerid=634552...

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management