Toshiba 39L4353D cannot connect using Intel WIDI after upgrade to win 10

Similar Questions

• My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

  My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

  HI andrewcsfan1,
  I understand that Firefox cannot connect to a network after update.

  • Difficulty of problems connecting to websites after Firefox update

  What operating system do you use? What is XP?

• 1000 HP Notebook PC: Cannot use mic internal after upgrade to win 10 Home 64-bit

  After the upgrade to Windows 7 Home Premium 64-bit for Windows 10 Home 64 bit on my laptop notebook PC HP 1000, Windows cannot hear the internal mic, I think that the signal of the microphone is too small. I can't use Cortana, Skype chat, or den. Windows says driver registration is still available and connected, but there is no signal recording.

  

  I have already uninstall and reinstall the driver from the site Web of Realtek and HP, but no effect. I also used Windows troubleshooting and HP Support Assistant, but he's still not normal.

  Can someone help me solve this problem. I really want to use all the features of Cortana.

  https://www.YouTube.com/watch?v=jOpS6GD0hZo

  the use of microphone and webcam even port so neither worked for me but this perfect working, I literally just pushed a little because I didn't do any damage, did not feel a click or something like that, but I did it with computer again and as soon as I saw him looking for drivers, I knew that it worked must be a bad design that it comes off like that

• BlackBerry Smartphones cannot connect to My World after upgrade to AppWorld 3.1.0.56

  AppWorld works very well until clicking on MyWorld then crashes displaying "Please wait". Cannot go out by the battery pull. Have tried to uninstall and reinstall but no joy.

  Tried to connect to AppWorld via USB and PC. This shows the good device (and I managed to install AppWorld on device here) but all the applications installed on the device with "uninstalled".

  Any ideas?

  I solved. It's a real shame that RIM do not give a * beep * about its customers even after the latest fiasco. I tried to contact them several times, but I got used head in the sand. It seems that the recent release of AppWorld is full of bugs (beta test RIM nice!).

  Just uninstall and upgrade to the previous version (available OTA at http://rroyy.com/otaarchive/) ensuring that you choose the right version of the OS. BINGO! No problem again.

• Unable to connect using Face Time after updating iOS 9.3

  Unable to connect using Face Time after updating iOS 9.3

  gshort319 wrote:

  Unable to connect using Face Time after updating iOS 9.3

  Use FaceTime with your iPhone, iPad or iPod touch - Apple Support

  Get help if you cannot make or receive calls FaceTime - Apple Support

• Impossible to use Intel widi with my Satellite L50-A-11 t

  Hello

  I have a Satellite L50-A-11 t and I tried to use Intel widi with 8.1 of Windows and does not work, it says that the system is not compatible.

  With Windows 8 it was ok and it worked very well, but in the apparell for the upgrade it supposed to remove Intel widi.
  Why is this?

  Thanks in advance.

  Hello

  I found this important info in the knowledge base of Toshiba:

  Important notice for users of Wireless Display (WiDi)
  http://APS2.toshiba-tro.de/KB0/TSB3903IF0000R01.htm

  There, you can find this info:
  * Intel Wireless Display is no longer supported on Windows 8.1*

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• Toshiba 46TL938G: my laptop cannot find wireless LAN using Intel WiDi

  Hello

  I have the Firmware of 46TL938G more recent (January 2013)
  and a Notebook DV7 Intel N2230 with Intel Wireless Display support (latest updated drivers)

  The TV or laptop may not find connection to each other.

  Anyone work?

  What should I do?

  Did follow the steps described in the manual user 60 page?
  If this is not the case, check it!

  The user manual here:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF

  Also, you must ensure that your s notebook LAN card is Intel WiDi supported.
  Make sure that you use the latest Intel INTEL PRO wireless and Intel WiDi

  Here another thread of this forum on the use of the Intel WiDi:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71343

  Your comments would be appreciated

• TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

  It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

  Hello

  What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

  Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

  It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

• Computer cannot connect after upgrade to win 7

  I have a window of lapop run Dell 7 and after an update, to stop and can not connect the next day the model keep say bad password but the suspicion is correct for my PS. I did not create a password reset disk so now I can't use my computer... MS or someone please help thanks

  Hello

  You will have to return before updates, which is unfortunate.

  See if this helps you; the first part is what you must try as you say you know your password.

  Look at scenario 2

  And you should make a password reset disk before you forgot your password, not afterwards.

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  Note

  AS you can not use your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Toshiba 46WL863W - cannot connect to Toshiba Places

  Hello

  I bought the new tv with this model 46WL863G but I can not connect my TV instead of Toshiba.
  If I enter the key to connect instead of Toshiba, I have an error
  + A connection could not be established. +

  Any body can help me?
  My wireless connection is good and I have no problem with internet connection because my TV is to connect to my home group for sharing between PC and tv

  Hello

  Probably he s not the problem with your connection or your TV, but there is probably a problem with the Toshiba Places server.

  Once you're connected to the internet, all that s left is at startup Toshiba Places on your Smart TV and enjoy everything it has to offer.

  To open Toshiba Places simply press the menu button on your remote and access Connected TV, then Toshiba Places. Alternatively you can simply press the button Toshiba Places directly on your remote control.

  He asks you to read and accept the list of Toshiba Places terms of use and once you ve done so the complete interface of Toshiba Places open for you to use.

• Cannot connect to Windows 8 after refresh.

  Original title: could not connect to Windows 8 after refresh. I'm about to lose my mind!

  I am LIVID!

  I updated my NEW laptop because Windows 8.1 caused a cargo problems and crashes. NEVER AGAIN.

  After refreshing, I could only login with a local that gives me access to anything. My normal password and log in as administrator using stupid windows live.com password no longer works.

  So, I changed the password for windows.live on another PC.

  Now this new password no longer works. WTF?

  I can't access any of my stuff that was installed and stored under the original user/password.

  I can't add a new admin account, I can not do an another drink or fresh install. Nothing. He just guard invited me to the password that it won't take.

  Also, when I searched this problem on the web, I see dozens and dozens of links for this problem.

  BUT when I go to the link, it seems that they have all been removed from answers.microsoft.    TRY to HIDE the PROBLEM?

  Can someone tell me how to get out of this nightmare, so I can access my original account. PLEASE, I BEG YOU!

  Please, I beg you.

  Hello

  Sorry for the delay in response.

  Please take a look at this article and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

  Here's another thread that has some good troubleshooting steps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Hope that the information was helpfula and let us know if you need assistance in the future. We will be happy to help you.

• Cannot connect using ThinkVantage Fingerprint software

  Hi, I can't connect using my fingerprint reader. I'm sure that the fingerprint reader is OK, I sucessfully registered fingerprints. I activated the connection of the fingerprint, when the computer starts, windows 7 message saying 'Slide your finger on the green' appears, but when I drag the finger, nothing happens. Fingerprint reader just a flashing green (when I try to finger Chipeur, who is not registered, flashes orange, so fingerprints are registered properly).

  I tried to uninstall the software of fingerprints and the pilot, but his does not work. I connect with the domain account.

  OS: Windows 7 x 64

  Lenovo T410 (NT7Q7MC)

  ThinkVantage Fingerprint Software version: 5.9.4

  Thank you very much for the help!

  Labus

  The domain account is probably the question given that the fingerprint software is installed for local connections. Someone correct me if I'm wrong about this.

• Users of VPN cannot connect using application using port 3404

  VPN users are connecting using vpn tunnel to destination of a pix 515e however, they are unable to use the connection on port 3404 application. He used to work, or so I was told, but it no longer works. What I am doing wrong? Please notify. Here is the config:

  IP 192.168.0.3 - dealer 192.168.0.5 pool room

  IP pool local DYNAusers 192.168.1.2 - 192.168.1.20

  IP pool local DYNAusers2 192.168.1.21 - 192.168.1.254

  vpngroup address pool DYNAusers PCPVPN01

  vpngroup 192.168.x.x wins server PCPVPN01

  vpngroup PCPVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 PCPVPN01-time

  vpngroup password PCPVPN01

  vpngroup address pool DYNAusers WELLVPN01

  vpngroup 192.168.x.x wins server WELLVPN01

  vpngroup WELLVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 WELLVPN01-time

  vpngroup password WELLVPN01

  vpngroup address pool DYNAusers2 SRVCVPN01

  vpngroup 192.168.x.x wins server SRVCVPN01

  vpngroup SRVCVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 SRVCVPN01-time

  vpngroup password SRVCVPN01

  permit 192.168.1.0 ip access list DYNAsplit 255.255.255.0 192.168.0.0 255.255.25

  5.0

  permit access ip 192.168.0.0 list DYNAsplit 255.255.255.0 192.168.1.0 255.255.25

  5.0

  DYNAsplit list of allowed access host ip 209.42.50.82 192.168.1.0 255.255.255.0

  DYNAsplit ip access list allow any 192.168.0.0 255.255.255.0

  access-list DYNAacl 60 allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0

  Permitted connection ipsec sysopt

  Answer sheet crypto ipsec transform-set esp-3des esp-md5-hmac Dynamics

  Crypto ipsec transform-set esp-3des esp-sha-hmac To_NHP

  Crypto-map dynamic DYNAmap 30 game of transformation-dynaset

  card crypto VPNtunnels 30-isakmp dynamic ipsec DYNAmap

  map VPNtunnels 40 ipsec-isakmp crypto

  crypto VPNtunnels 40 card matches the address 150

  card crypto VPNtunnels 40 set peer 70.151.5.114

  card crypto VPNtunnels 40 the transform-set To_NHP value

  card crypto vpntunnels 40 the duration value of security-association seconds 3600 KB

  s 4608000

  VPNtunnels interface card crypto outside

  partner-30 map ipsec-isakmp crypto

  ! Incomplete

  ISAKMP allows outside

  ISAKMP key address

  subnet mask 255.255.255.255

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 30

  ISAKMP policy 30 3des encryption

  ISAKMP policy 30 md5 hash

  30 2 ISAKMP policy group

  ISAKMP duration strategy of life 30 86400

  part of pre authentication ISAKMP policy 40

  ISAKMP policy 40 3des encryption

  ISAKMP policy 40 sha hash

  40 2 ISAKMP policy group

  ISAKMP duration strategy of life 40 86400

  Hello

  It is good to hear that the problem has been resolved. Please note do you have for the job?