Toshiba 46TL938: 3D playback choppy when PC to TV via HDMI

Similar Questions

• Unable to turn down sound when connected to Xbox via HDMI

  original title: Xbox connected to the HDMI port, the only problem being transmitted through the built-in speakers is extremely strong, I change the volume but no estate

  Hello

  I rang pakard bell on this problem, but they seem to just pass me the pillow to post.
  I use my pc as a HD TV for my sons Xbox via hdmi in the plug. The picture is fine but the volume is just do noisy and uncontrollable. I opened the pc that runs in the background one turned the volume down, but when I go back to hdmi it is still loud. Control of the computer work pc background because when I press the mute and then switch to she is silent.
  The pc is a Packard bell onetwo all in an icore5 with built in blu ray hdmi in.
  Any help would be appreciated.

  Hi Stuart,

  Thank you for visiting Microsoft Community.

  How to configure the audio settings on your Xbox 360

  http://support.Microsoft.com/kb/906660?WA=wsignin1.0

  Improve the audio quality of the Xbox 360 console

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/improve-audio-quality

  I suggest set you up your query in Xbox support for assistance on this issue.

  Here is the link:
   
  http://support.Xbox.com/en-us/contact-us

  If the problem is still not resolved, post in the expert community on the following link:

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/116.aspx

  Thank you

• Video playback choppy when slow mo and speed

  Every time I have slow down a section of a component or speed it up, playback becomes jerky and not smooth flowing. Get it fixed when I make it? If not, how to fix?

  Also, when I'm trying to ride the 2 clips together to fade from one clip to another, for some reason, faded away after the first clip, and shuts down the second clip, the clip just becomes very low, then it goes black, then fades in. How can I fix it? This is how I did it:

  I put the second clip above the first clip, then I set the first keyframe at the beginning of the 2nd clip then set opacity to 0. Then I put the second keyframe where I wanted to fade to be complete, then set opacity to 100. However, when I read, what is happening.

  I'm doing it wrong?

  FYI, I use the latest version, the CS6.

  Thank you!

  Dissolves... which is what this kind of transition is called--are pretty easy. Butt just two clips, making sure that every clip has a point 'in' which is a second or so in the video and a 'out' point one or two seconds before the end of the clip. The bits of a clip before and after points of entry/exit of the clip are called "handles".

  Go to the video/Transitions effects, take dissolve it and drop it on the joint between the two clips. A fade in the other.

  Premiere Elements could fit better your computer capabilities, I don't think it needs as much material as PrPro.

  Neil

• Changing movie game mode picture of USB on Toshiba 46TL938

  Hello

  I tried to play a movie from the USB on my Toshiba 46TL938 yesterday.
  Unfortunately the reading has had a lot of opera and probably I didn't see anywhere near
  playback 24 p.

  On my TV, I have the clearscan completely off, but it seems that the toshiba media player uses its own default settings. On my computer, the movie played without any problems, so the file was quite well.

  I finally connect my computer to my TV to watch the movie decently.

  You have any suggestions on this subject?
  I could not find any additional setting that would solve this problem.

  The manual provides information on the use of TV Media Player (page 65)
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF

  During playback, you can adjust the functions of the menu of the image and sound in the Quick Menu
  But these elements are different depending on the current mode.
  Play movie USB the quick menu does not contain the same elements as when watching a TV show or of the external entry-stop or one-stop 3D photos

• Solution for DVD playback choppy on Satellite Pro A100

  Hello!

  I had this problem twice on my Toshiba laptop (Satellite Pro A100 bought in April 2006): the DVD used to play very well, but now (perhaps after an update of the driver or installation of software, I not sure what causes this) DVD playback is choppy, distorted sound. This occurs throughout all media players on Windows XP (for example, PowerDVD which came with the laptop) or Windows media player.

  I searched the internet far from a solution and finally found how to solve this problem:

  Go to Device Manager, select the "IDE ATA/ATAPI controllers" section, and then select the "second IDE channel", right click and 'uninstall '. (There are two second IDE channels, if you know which then just uninstall both.) Restart Windows XP, Windows XP will automatically reinstall the drivers without the need to download anything. Subsequently the DVD Player reads normally.

  The symptoms of the problem, apart from DVD playback choppy, are the "transfer mode" gets stuck on PIO for a reason, and bring back to DMA with no opportunity to spend. I have no idea what software or driver causes this, or why, but if this is your problem too, if you think that this solves.

  Cool, thanks for the inquiry and the nice information.
  Could be useful to others here in the forum.
  Nice to have these community users :)

• Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI

  Hi all

  I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them.

  I've updated to the latest drivers from Toshiba, but it has not yet resolved the issue.
  Any help would be greatly appreciated!

  Care of my system is as follows:

  Processor: 2.66 GHz Intel Core i5 480M
  RAM: 4 GB DDR3 RAM
  OS: 64 - bit Windows 7 Home Premium
  Graphics card: ATI Mobility Radeon HD 5650

  > I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played

  The crackling is in from the TV speakers. Right?

  Can you hear the Crackle even using headphones or speakers for laptop?
  If not, then I think that this problem could be related to his driver.

  In your case, I would check the settings in the control panel-> sound-> playback-> audio digital-> set up

• Toshiba 46WL768 - abandonment of the photo while streaming from a PC via HDMI

  I believe I have exactly the same problem for a year on my 46WL768 when running from a computer via HDMI.
  The problem seems to be related to the level of the input signal that happens much more often a source of the computer, but seems to be the same problem you describe clear or too dark.

  I tried all versions of firmware that I can find.
  I tried, as far as I know, all combinations of each including triggering turnng the options in each mode of TV (something still on in-House who controls this however, no matter what you do).
  I tried several computers and several graphics cards very expensive.
  I even sent listed you for repair where a number of parts, including the motherboard have been replaced (as a precaution because they could not find the same question, yet I can reproduce instantly).

  You can make it less annoying by opting for one of the default views Hollywood, but you can't, in my experience, get rid of it. Your only two options seem to be flashing constantly with a very high level of responses for actions on the screen, or it is less often stumble but have an image on the screen "lag". If you look at the Movies TV/no-act, the second option is not too bad but there not acceptable for computer use which is what I use it for.

  The problem, as I understand it, is once the bright/dark ratio of the image displayed on the screen will over/under a certain level of relaxation, the screen flashes on an another secondary display mode and the white you see is this switch.

  Maybe you should try to disable some additional features like local sponsorpark, clean scan, view auto or erase the image.
  AutoView mode automatically adjusts the picture settings based on the ambient light conditions and input signal.
  http://us.Toshiba.com/TV/research-center/technology-guides

  Also recommend that you use the PC mode in case the laptop is connected. PC mode is available in mode of RGB/PC Input / input HDMI

• Sound will only via HDMI when it is plugged.

  I have my laptop connected to a TV via HDMI. The TV has no headphone jack, if I want to use headphones by connecting them to my laptop. When the headset is plugged in, the sound will still through the HDMI.

  I tried to change the devices by default and disable the HDMI audio in the control panel for the sound, but it won't work. I used the troubleshooter for audio. He has acknowledged this problem and tried to fix it, but failed.

  How can I switch "Speakers and headphones" on the default audio device?

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Damaged audio drivers.
  -Incompatible audio drivers.
  -Bad sound settings.
  -Missing updates.
  -Problems with the sound card.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check number.
  Reference:
  Diagnose and solve the problems of Windows audio playback automatically
  https://support.Microsoft.com/mats/audioplayback

  If this does not help, use method 2.

  Method 2:
  Please use the steps outlined in this article and the Coachman.
  Reference:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Toshiba 42WL67Z - no picture via hdmi and vga

  Hello

  After a power outage, my 42WL67Z (Regza LCD) no longer displays a picture via hdmi and vga.

  The computer receives a TV signal, it detects the screen when connected and offers the usual option (duplicate or prolong the display, screen resolution), but no image is displayed.

  The OSD works well.

  Ideas?

  > Ideas?

  I think that you first need to connect to another device (DVD player, Blu - Ray player, etc.) on television and must choose the right channel to enter the settings.
  If TV continues not to receive all the signals of such device, it means you have a hardware problem.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• my screen goes black when I plug in my HDMI cable

  I have never had a problem with the help of my my TV HDMI cable to watch movies from my laptop.  I do not know whether the windows update is causing this problem, but when I plug in my HDMI cable to my laptop, the screen goes black and the TV receives no signal.

  Hi, I had the same problem when I plugged the hdmi for the first time that I chose the 'graphics options-> output-> TV' at first by right-clicking on the desktop. Later I selected "change pc settings" section of charms and the selected tab devices add a device and while the laptop was looking I have connected the hdmi cable. This is how I got to the TV screen.
  probably, you will need to turn off the TV and the laptop first. Then put on the tv and select the desired hdmi option before you put on the laptop and pressing on the ' logo window + p "or"fn + f4"keys. Lets c if it works

• Problem with sending a message when you're connected via Wi - Fi

  Hello. Still getting used to my Dext (owned it for about 4 days). I noticed this morning that I can't send the mail from the POP3 account, I set up on my Dext when I am connected via Wi - Fi - when I try I get an "authentication failure". When I disable Wi - Fi email sends end. There is no problem with webmail - send although I am connected to the Wi - Fi or 3 G network.

  Anyone know how to send the mail while POP3 on the Wi - Fi network? Thanks in advance...

  Understand the problem - port incorrect settin for mail server outgoing. Changed to 587 according to some messages that I saw during a search - that did the trick!

• I hear my laptop only, when I am connected to my TV via HDMI.

  Sound game

  
  
  I have a problem and now I have this laptop and I connected it to my TV via the HDMI cable and I get sound from my laptop only.

  What I need to do for my settings in my Panel on my laptop...

  I have the picture but the sound only comes from my laptop. I can't seem to get the sound as well as the T.V...

  What and where in my settings I do... ? ? ? ?

  
  

  ... I have the picture but the sound only comes from my laptop. I can't seem to get the sound as well as the T.V...

  When I set up my phone to use my TV as a second monitor via HDMI, I had to install an HDMI audio driver before I could use the TV speakers system. You did not mention the brand / the model of the laptop, but I imagine it would be a similar problem in my DELL Studio 17.

• I have my Toshiba computer connected to my TV via HDMI. Video works fine, but I can't get any audio.

  I have my t.v. from tom toshiba satellite connected via an hdmi cable. Internet and work video grat. I can't get the audio signal to the TV.

  Hello

  To add a bit to the excellent advice of RajithR:

  You can check with the help of Toshiba, their documentation online and ask in their forums
  on the problems known.

  How to activate Audio via HDMI
  http://www.MyToshiba.com.au/support/items/FAQ/316

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  With the help of PC Audio on HDMI
  http://www.brighthub.com/computing/hardware/articles/27727.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When I plugged in my hdmi to pc I have followed the news but when I rehooked my moniter I lost the signal from my TV.

  moniter and hdmi problems

  When I plugged in my hdmi to pc I have followed the news but when I rehooked my moniter I lost the signal from my TV. I have a vizio hd tv.

  Hello

  ·         What operating system is installed on the computer?

  Method 1: Follow the steps and check if that helps:

  (a) first of all you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  (b) open the "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  (c) pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Reference: http://windows.microsoft.com/en-US/windows7/TV-on-your-computer-Understanding-TV-signals-and-TV-tuners

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Method 2: updated the graphics card driver and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly