Toshiba 50L4333D does not recogize NAS networked home

Similar Questions

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• Account name My Vista "a name of the user [name] account log does not exist on Windows Home Server" is not, despite the change.

  My Windows Home Server (WHS) prefer the same name of user account on all computers that I use - for the connection and easier access to the files. So to my Vista computer, I changed my account [ancien_nom] name [name]. Vista indicates the name of the new account everywhere but the server after a while (!) stopped recognizing my account and complains about "a name of the user [name] account log does not exist on Windows Home Server" suggesting I should change the name of the account on the ESM. Since I have other computers where I can't change the name of the account (work computer), for this purpose I changed the name of the account on my Vista computer.

  The reason why the WHS could work properly at the beginning maybe I can connect to the WHS folders in a separate process by using the new account name. Choose to save the password - which might have worked for a while, but no more. I also tried to connect as a network device, but I do not correctly reconnect with the identification information data (and saved).

  1 is the name of initial account stored anywhere even if I changed and the reason why it can pop as in this case?

  2. any ideas on how to solve this problem?

  3. or is the problem only on the side WHS - then I might have to turn to a WHS forum

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They will help you in the above Windows Home Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• The Web of Toshiba site does not recognize of my drive hard number and P/N

  Hello

  There is a little less than two months, I bought my HDD Toshiba Canvio Basics 3.0 from Amazon. The hard drive has stopped working for some reason any (I drop or something, it simply stopped working).

  Of course, I was trying to use my warranty to repair or Exchange it, but the Web of Toshiba site does not recognize my serial number and product number. They are just there, black and white on the sticker on the back of my hard drive, but the site says they are not valid.

  Someone has an idea what is happening? I would rather not throw 50 euros by the window for less than two months of use.

  Product number is HDTB105XK3AA - and not to HDTB105 * E * K3AA like some sites say (including Amazon).

  Thanks for your help.

  Stand by. Have you contacted Amazon using Amazon options for repair under warranty or Exchange?

  Check please help Amazon option and collect detailed information on defective, damaged or significantly different returns.

  Two years ago I had problem with the mobile phone bought by Amazon and I send direct Amazon with bill Amazon.

  By the way: can you please post the link where you have tried to check the serial number of your HARD drive?

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Webcam on my Toshiba NB305 does not work

  Sorry to invade this question, but I couldn't figure out how to post a question that tells you how stupid I am.

  The webcam on my Toshiba NB305 does not work.

  When I go into programs he says neveer me a wizard will popup, but it does.

  Help.

  Hello

  Why you don t try to reinstall the webcam software?
  I think that the software is corrupt and who knows why.

  Visit the European driver of Toshiba page, choose your model of laptop, choose webcam software, download this and reinstall.
  Before beginning a new installation, you must remove the previous version

• Re: Toshiba Tempro does not work

  When I connect Windows 7 on my laptop, I get a dialog message saying that Toshiba Tempro does not work and that Windows is trying to find a solution, although he never does.

  I tried delete, by downloading from the Web from Toshiba site and reinstall it without success.

  Help, please!

  Peter

  Usually reinstalling should help. Remove the Tempro system, clean using CCleaner registry entries, restart the laptop and try to install Tempro again.

  In the worst cases, remove Tempro and the problem is solved. In General, it is a useful tool in Toshiba but in fact you don t he need at all. I removed it from the system. In a first time, it runs in right context and slow down the performance of s for laptop and inform me of updates which are not so important to the functionality of the laptop.

  Perhaps in the future make you clan installation operating system with original Toshiba recovery image and after doing this, you will have clean OS preinstalled with working perfectly Tempro.

  Good bye

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• I'm looking for a link to XP SP1 does not require a network connection to install

  I'm looking for a link to XP SP1 does not require a network connection to install

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Restart twice.

  5 install the SP3. Restart twice.

  6 switch to IE8. Restart twice.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• My Toshiba laptop does not connect to my wireless network.

  I have windows 8.

  One day all of a sudden my laptop disconnected the WiFi and it does not connect again. It shows not all connections, even if there is. All my other devices can connect to the wifi. When I see the attack it says that I need an Ethernet cable but I don't have my laptop and never a need. (Sorry for the bad English). Help!

  Hello

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  =======================================

  Check with Toshiba support, online documentation and drivers (update or reinstall) and ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
   
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• Satellite 2800 - BIOS does not recogize Toshiba 40 GB HARD drive

  I have an old Toshiba S2800 (if-200 questions in total). He was works very well with a 10 GB HARD drive for ages. Yesterday, I thought that putting his hard drive to a bigger.
  Removed the old and installed a new hard drive, Toshiba MK4026GAX. On the power on the BIOS does not detect the HARD drive at all. I can hear the humming noise (platter (s) rotating), but apart from that, there is nothing. The BIOS indicates disk mode HARD is "unused" and also on page 2 is none shown on the primary hard disk IDE channel. (tried to boot Linux from a CD to see if who sees anything on the IDE channel, but apparently the primary IDE channel is disabled if the BIOS does not detect a master or a slave connected device). Change the mode of the master to the slave na HARD drive? t change a thing.
  The BIOS version is 2.00. Tried to find an older one without success.

  I thought that the BIOS has a limit of 32GB, but when I connect a 120 GB hard drive (WD scorpio), it has been recognized by the BIOS and the PC was ready to boot from the device.

  I would have thought computers laptop Toshiba were at least compatible with another device (e.g. hard drive) Toshiba

  Someone has any idea how to operate?

  Thanks in advance!
  Robbie

  Hello

  It of very strange that the 120 GB HDD has worked on your old Satellite 2800 unit.
  I know that the BIOS would not recognize these large HARD drive sizes.

  In any case, seems the purchased disk is not compatible with your laptop and you can buy one that is supported.
  I discovered that the 20 GB HDD MK2016GAP could be compatible
  http://www3.Toshiba.co.jp/storage/English/spec/HDD/mk2016.htm

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• WiFi does not connect to the home network

  IM currently problems with my wifi on my new z3 compact network.

  My compact z3 is able to find the wifi network & shows an excellent signal, I get the password to try to connect but just z3 keeps alternating between safe, secured with wpa/wpa2 & getting ip address...

  I tried to reset the router, phone that allowed me to use wifi, but a day later I'm back to the problem off z3 does not connect to wifi. All other devices connect without any problem at all.

  Any help would be appreciated & ty in advance.

  Do you know if there is no limit on the number of devices that you can connect to your ISP network and the internet? Also make sure that DHCP is enabled in your network and you do not have any MAC-filter in the network.
  Alternatively, you can try to manually specify an IP address that can be used in your network in the phone. Tap and hold the network, select Modify network, then check Show advanced options and set a static address.