Toshiba A10-131 and Intel 2200BG

Similar Questions

• A30 and intel 2200BG miniPCI adapter

  Hello!
  I read the same topics on this forum but have not found an answer.
  I installed the wifi (intel 2200BG) adapter to my A30 all seams OK, but he says hardware switch off the switch is on, but the green light stays off and the Wireless does not work.

  I found a tip to cover the 11 and 13 pins, made all the following instruction, but nothing happened. It still does not work.

  Any tips?

  Hello

  I think the best way to solve the problem of card Wifi is t contact Service partner by phone!
  Maybe they can tell you what you did wrong!

  I searched Toshiba knowledge base, but I can't find anything about creating a Wifi card!

  Sorry!
  Rudi

• Lock problem, P10-792 and intel 2200BG wireless

  My 792 P10 is not equipped with Wireless Lan Mini-PCI card and it doen't have the on / off wireless switch, but it is possible to add a mini-pci wireless card.

  I installed the Intel 2200BG mini-pci wireless card. The drivers are installed in windows and linux correcltly.

  When I am using Intel wireless tool to set up my wireless card, I get the error message:
  Locking wireless must be turned off and the same error under linux when I am loading the module appropriate.

  I tryied to disable wirelless lock using Fn + F8 and all the other function keys, but nothing happened.

  How can I unlock Wireless Lan?
  Thank you.

  Hello

  Can you please check the status of the card wireless in Device Manager? The card enabled or disabled? Please check in the properties of the map under the device using wireless if there is use of the status of this device.

• Satellite A10 - 131 and BIOS update

  I want to update my bios but I can't understand how :) I downloaded the R131VOL2 Web site. When I run I get the question to insert a disk 3.5 "... but the satellite A10-131 is not a floppy drive. So I'm stuck :)

  Hi Niek,

  Unfortunately Toshiba provides only an update of the traditional BIOS for your laptop you need a USB FDD order to use the update.

  Kind regards

• A30 and Intel 2200BG working now with Scotch!

  I searched and read and did not believe what I read, but with the help of a little Scotch tape on terminals 11 and 13, I'm running.
  3 weeks I have fought this, support Intel only responded once to tell me to download the latest version of SW, which I had already said, I've had.
  By mistake, I was under the impression that the assignment of pins for Mini PCI cards had been agreed and that it was the norm. What is rocking the boat Toshiba or Intel? My first impression is Intel as a search for "2200BG" throws up a lot of problems and not all models of Toshiba.
  However, I suggest anyone who has problems with the Mini PCI 2200BG card try first the fuse high-tech method of tape adhesive tape.
  BTW the wireless switch or fn + F8 still does not work.

  Hi Alison

  The fact is that this Intel card is part of the Centrino concept and many laptop producers use this to own units. A few days ago that I've que j' ai ete been I electronic store and I looked into many notebooks (various manufacturers) and almost all device manager have this card.

  The fact is that the producers of the laptop cannot do much. In my opinion, Intel should test and verify the functionality first. If you visit the Intel download page there are a lot of new drivers for this card and I believe that trying to Intel to make it better. We'll see.

• A10-131: unable to find a new version of Power Saver

  I have Toshiba A10-131 and I would like to use one of the latest versions of Toshiba Power Saver (located in Russian). Should I? Where can I download it? In the download section, there are only a few old version.

  Hello

  Well, you can try to check the energy that is installed on the other latest devices. Maybe you can find a newer version. But I can t understand why you want to update the energy saver? You know that if you have installed for the units of the other energy-saving, then you might have some problems. In my opinion if you n t have any problems with you old saving energy, so you shouldn't t make updates.

  Good bye

• A80-131: problems with intel 2200bg

  Hello

  I bought a toshiba a80-131 and I have problems with my wireless card, an intel 2200bg.

  the wireless connection is still down, and when he isn´t, the download speed is very low (1-2 kbs) in a lan connected to a service 256kbs 11.

  I know that the problem is in the wireless card, but I Don t know how to solve.

  the drivers are all of these loans.
  Can someone help me?

  Thank you

  Hello Pedro

  Try to disable the card wireless in the ConfigFree tool and shortly after it turn on again and check the intensity of the signal and connection.

• Satellite A30-PSA30E Intel 2200BG wireless problem

  Hello
  I bought the new wireless card intel 2200BG miniPCI for my Toshiba laptop. I have card connected to the miniPCI slot free and both cables are connected as well.
  My problem is that this hardware switch on the right side of my laptop does not work (no led light). The original Intel software is posting I have material activate this card. Can you help me please?

  Hi Michael

  I hope that you have connected the card properly. The white cable must be connected to the HAND and a black to the power supply please check if the card is recognized and properly installed. The status is displayed in the Device Manager. The wireless adapter should appear under network adapters.

• Password BIOS Satellite A10 131

  I bought an old box of voor laptop 15 but he happened to have an unknown bios password, so it does not start.

  For almost every Toshiba I can find a solution on the internet, but not for this old A10-131.
  Tips and tricks like masterpasswords, dongle on the parallel port (which mij A10 is not!), remove the cmos battery and. etc won't work. Is there anyone who really know the solution for this problem?

  There must be a jumper on the motherboard which solve the problem I think. But what date is?
  Anyone know the right name (B500 or almost) this rider?

  Thank you very much for your answers.

  From my own experience that the Toshiba service can remove the BIOS password.
  A rider who could do the job does not for me.

• Satellite A10-131: really slow start

  It takes about 15 minutes (!) for my Toshiba Satellite A10-131 to start. It's really frustrating when you are in a train or some other place where you need your laptop for a short period. I've changed the original with fastest 256DDR ram 1024 GB, I installed all the drivers on the right and most recently, I tried several formats, etc., but doesn't change anything. Does anyone have any ideas? The only thing that I did not try to change have the BIOS setting, mainly because I have no idea how it works :)

  Thanks in advance!

  Hello

  It s very strange because I've never seen a laptop that starts at 15 min.
  It would be very interesting to know if the cleaning Windows OS need also 15 min.
  If yes then I guess there is something wrong with the hardware (maybe the motherboard)
  Unfortunately, I put t know all the BIOS options that could reduce initialization time.

• I need a driver for my Satellite A10 131

  Please, help me. I'm looking for a driver for my laptop, with the name of the model Satellite A10-131. I can't find the right on this page!

  Hello

  I guess you are looking for a driver audio XP.
  I found this driver on Toshiba Europe page!

  You must choose the good laptop, dude!

  In the form of pilot please choose this:
  Laptop-> Satellite-> Satellite A10-> WinXP-> sound driver

  All that s. download the driver, install it and enjoy your life ;)

• Intel 2200BG always disconnect when the value g on a Satellite M70

  Hello

  After months of go around forums and messages, I still have the same problems with my card Intel 2200BG wireless.
  Of course, I've updated my bios, drivers,... but the problem remains.

  I called toshiba france and they were just as good to send me a link to the latest drivers...
  I have no problem with mode b and use channel 11.
  I think I'll just throw this card and buy another brand.

  Any suggestion?
  Thanks for the help
  JPaul of<>

  Hello

  Don't always blame your WLan card in Notepad.
  Wireless performance depends on the wireless card, but also on the WLan router!

  You define the G standard only on the router or wireless network card?
  In the WLan card properties, you should be able to put the B, G or two B/G.
  Also turn off the power save option on this map.

  Maybe you checked only the Toshiba driver for the latest Intel WLan driver page. Download the latest driver on the Intel site!
  You use the Intel ProSet utility?

• Satellite A30: Compatibility Intel 2200BG miniPCI WLAN

  I installed an Intel 2200BG (Toshiba part No.G86C0000X310) Wifi card in my Satellite A30. I tried to load a number of different versions of Intel drivers, but whenever I activate the driver of that laptop computer crashes. I've seen other messages indicating that they got this card works by pin 11 and 13 with masking tape, I tried this.

  Has anyone else seen and solved my problem?

  Hi Andy

  Before that you purchased this card did you check compatibility with your model of laptop with the cards?

  By the way: all laptops A30 aren't ready WLAN. For example, A30 - 514 is WLAN ready and compatible Wireless LAN card is PA3212U-1MPC. Check it!

• The Tecra S3 M780 / Intel 2200bg / Win XP SP2 without WPA connection possible

  I tried for months now to get my laptop to connect to a network secured with WPA - PSK wireless. I couldn't make it work at home, but I blamed the router. There is no problem connecting without warranty from WEP.

  At work there is now a new wireless network. Once again, no connection possible. I tried now 4 different access points, but it does not connect with the WPA. Still, first step of the link seems possible (he sees the router and asks for the password, then the router responds), but the laptop does nog acquire a network address and will try until its cancellation. Other laptops have no problems with these 4 a / p

  I updated all the drivers, deleted all and installed the wireless drivers. All tried, but now I give up. It will not connect. I think it might be a problem with the generation of WLAN (Intel 2200bg) modem, but how can I be sure?

  The laptop is still under warranty, so I could have it checked by Toshiba, but I work independent and need my computer every day. Please help me. Thank you!

  Hello

  Just a quick comment: I use the M70 Satellite with the same card WLAN. Last week I installed the latest driver WLAN of the Toshiba download page. I also installed Intel PROSet, but I use Windows WLAN configuration.

  If you want to disable Intel PROSet and just use Windows WLAN configuration press F10 and confirm with YES. You can use WPA encryption, but be sure that you set WPA - PSK (no server) option and choose between two Techniques of encryption (TKIP or AES). On my router default is TKIP. The same settings that you can find in the WLAN Properties on the wireless networks tab.

  If you want to use zero (recovery CD), you can reinstall Windows XP Home edition only.

• Tecra A4: Wlan Intel 2200bg not stable with 802.11 G WLan

  With the latest driver re-installed (9.0.4.39), I found a connection to a network of 'g' was unstable. (A little better than before you reinstall, when it connect to a network of 'g', but does not have all the data.)

  With a BT Homehub, now a router DLink DSL-2640R (TalkTalk) I found that to have a stable connection with the latest version of the driver is to configure the router to use only 'b' network. But it's slower.

  Until I got a different router (recent change of telco provider) I assumed it was a problem of BT Homehub (believe me, I had spent some time trying to solve the issue!). However, now that I've tried both routers and found the same problem, I thought it would be a problem with the configuration of the laptop...

  I kept many downloads wireless driver I have installed and tried to think of the happy times when cell phones and the homehub were happy to communicate on a network of 'g '. I went back to 9.0.4.17 driver version and guess what, all problems disappeared with the new router, and fortunately it is connected to a network of 'g '.

  Normally, the Council is to use the latest version of the driver, then why I would have success with an older driver. What have I done wrong? I tried different types of encryption available and it did not affect the problem.

  I've got the box to allow windows to configure my network. I when I tried using the software Proset, but who stopped the ConfigFree to run correctly so I went back to the original set upward there.

  Does anyone have any suggestions as to what I have to do to get a stable connection to a network of 'g' with an Intel 2200bg with the latest driver (9.0.4.39)? I am suspicious that I can run into other issues if I continue to use the old driver?

  There are always problems of compatibility with wireless products, particularly when connecting different brands. Manufacturers are constantly updating the drivers for the problems, but sometimes it can introduce problems with old ones as the 2200BG card.

  First thing to do is update the firmware on your router, and then update the drivers for the wireless adapter. If later drivers do not work, it won't hurt to return to a previous version.

  You can also try to change the advanced settings in the properties of wireless adapters in Device Manager. For example, try the configuration to "802.11 g only", try another channel, try different power settings, etc...