Toshiba A45/S151: OS crashes after the change of power setting

Similar Questions

• Computer Toshiba laptop does not work after the lid slam... Help please!

  This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

  In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

  As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

  Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

  Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Constant crash after the last update!

  History is constantly crashing after the last update, I've noticed the logo has changed. If I use a different application then when I click on new in the history in closes unexpectedly. Any ideas? can I roll back? What to know about me? Thanks in advance,

  Mac Pro running 10.9.1

  32 GB of ram

  Intel Core i7

  Member of creative cloud

  Update: this issue is resolved with the latest version of Adobe AIR. Please download and install the most recent http://get.adobe.com/air

• Dreamweaver CS3 crashes after the end of daylight saving time

  In Windows XP x 64, Dreamweaver CS3 crashes after the end of DST. There is a technical note which seems to describe the situation exactly. http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402776 & sliceId = 1
  
  However...
  
  (1) technical note says that this only happens with ASP and PHP code. I use ColdFusion. (This is a minor point).
  
  (2) technical note said...
  
  Remove the WinFileCache - AD76BB20.dat the Dreamweaver user configuration folder. Note that on Windows, the Application Data and AppData folders are hidden by default, so check that your Windows Explorer folder options are set to show hidden folders. The location of this file is as follows:
  
  Dreamweaver CS3 on Windows Vista:
  C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver 9\Configuration
  Dreamweaver CS3 on Windows XP:
  C:\Documents and Settings\ [username] \Application Data\Adobe\Dreamweaver 9\Configuration
  
  However, I couldn't find WinFileCache - AD76BB20.dat in Documents and Settings or in Program Files (86) \Adobe. (86, it is because it is a 32-bit program on a 64-bit computer, but everything else is the same). I tried then the two directories for *.dat and there was no file that resembled something like WinFileCache - AD76BB20.dat.
  
  . Can someone help me?
  
  Thank you!
  
  

  Alan, thanks for the suggestion.

  I did the research found the file, deleted it, open Dreamweaver CS3, chose the same text - and it crashed as before.

  THEN I REBOOTED and tried again - no. CRASH. So it seems that a reboot is an essential part of the correction.

  BTW: My situation exactly match the description of the Technote. (1) the accident occurred when selecting - in design view or code - some text in a HTML context involved in the code ColdFusion; (2) I had no problem with these files before DST ended; (3) even after I've not had any problems with them in Macromedia Dreamweaver 8 on another machine - the problem is that the CS3.

  So the TechNote is correct as it will, but should be changed as follows:

  (1) ColdFusion should be included in the types of code that can be associated with the problem.
  2) instead of delete the WinFileCache - AD76BB20.dat, you should delete the WinFileCache-[any] .dat.
  (3) a reboot after the removal may be required.

  Anyway, problem solved.

  Thank you!

• Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

  Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

  It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Halo 2 crashes after the level "Gravemind".

  Halo 2 still crashes after the cutscene at the end of the level "The Gravemind".  The game acts like it's loading to the next level with the logo of Halo 2 and the vertical lighting of back and forth set.

  I had to play at this level twice, otherwise I can't get any achievement.  I'm tired of having to play at this level.
  My computer specs:
  AMD Phenom II X 4 955 3.2 Ghz Black Edition
  ATI Radeon 9870 x 2 1 GB GDDR5 Ram
  1 TB Western Digital Black
  ASUS M4A79T Deluxe Motherboard
  8 GB DDR3 1600 MHz Ram

  Hi Chuckthetekkie,

  Welcome to Microsoft Vista answers Forum!

  The system requirements for your computer is fine.

  I have a few here that might solve the problem.

  I suggest you perform the clean boot which disable the application non-Microsoft temporarily in conflict with programs. It helps us find what third-party application or service is causing the problem. Follow the steps in the link: how to troubleshoot a problem by performing a clean boot in Windows Vista: http://support.microsoft.com/kb/929135 Note: make sure to put the computer in a normal state, proceed to step 7 in the link. After you find out which application is causing the problem, please disable the program or application. If the problem persists, I suggest you to visit the site of the game Halo 2 to find if there are any updates or patches.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.

• sqldeveloper - 4.0.3.16.84 - x 64 crashes after the splash screen

  I had successfully used my installation of sqldeveloper - 4.0.3.16.84 - x 64 last week. After an update to windows 7 enterprise SP1 crashes after the splash screen and about 10% of the progress bar, until the message saying it is saving the extensions. There is no error or other messages of information displayed. I tried to run from a command window produces no additional information. I deleted the sqldeveloper folder and downloaded a zip file and reinstalled. Same behavior.

  

  The Data Modeler works very well.

  Any suggestions on how to do this problem.

  Hi Andy,.

  If the problem is not with the installation of SQL Developer (which you have unpacked in an empty directory) or find the JDK or having a JDK version that is inappropriate, you should then see if your user settings has been corrupted or (maybe) is somehow became less accessible than before the update of Windows 7 SP1.  These settings can be found under C: \Users\-Appdata\Roaming\SQL Developer\system4.0.3.16.84.

  
  

  Here is a compilation of a few standard tips offered several times before on this forum for this kind of situation:

  1 see if behavior persists after the removal of the settings and restart SQL Developer without migrating settings.

  (Be sure to make a backup (export) of your connections first!)

  2. see if (assuming that (1) does not help) allows to reinstall SQL Developer.

  If the fault cannot be placed on a migration of settings / download / installation corrupt, then we can start to consider...

  3. possible problΦmes with older JDK.

  4 OutOfMemory possible problΦmes that may be hidden by running only no Developer SQL from a command line console.

  5. a new bug.

  So try (1) and (2) If you have not already.  Ignore (3) If you are already using jdk7_u51 or later and are not on a Mac.  Point (4) can be a problem if you have many windows to restore and did not mount the Xmx values in the file product.conf - especially if you use a 64 bit JDK.  And (5), if you have the urge, see...

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  And if you want to try (1) in a clean 'sandbox' unaffected by existing directories of user settings, you can always add one

  AddVMOption - Dide.user.dir =

  line to your sqldeveloper.conf file.

  Hope this helps,

  Gary

  SQL development team

  P.S.: And keep in mind that SQL Developer "score" to a specific JDK in 4.0 and above all used the SetJavaHome in the product, conf, rather than sqldeveloper.conf

• Problem with implementation of Weblogic 10.3 after the change of username password

  I am facing problem with bringing Weblogic 10.3 after the change of username password in the field of safety Madhok, basically, I have deleted the user weblogic default and set m, y custome own user and provide credentials in the server start tab. When I try to bring up the administrator of the server it is, but managed servers fail from the administration console and I see security credentials for authentication error in newspapers? Why who would consider that the server administrator is able to provide the same credentials.
  
  Priya - malgouyres
  Systems architect
  InterAlliance Group Services
  http://www.interalliancegroup.com

  We had the similar problem in the past, our problem is:
  Problem:
  We have removed weblogic default security domain user and create a new user when Manager nodes and managed servers declined. When we try to put in place managed servers after the starting node Manager we continue get refused authentication errors.

  Solution:
  Recreate the user weblogic now try and implement servers managed from the command line using weblogic user. Once they are up to tap them down and bring them to the top again with the new user you created and it will work

  Reason:
  The 10.3-managed servers seems to store the local credentials he managed ldap or cache servers. When you start managed servers don't know the new information of identification and authentication performed against the old values of credentials stored, where they fail. Once they are started with the information identification old they communicate with the admin servers to sync it hides with admin servers and new identification information is updated and then you can restart the servers managed with the new credentials.
  Note: Sometimes after reboot you can meet the problem as the synchronization with the administration server process is asynchornous, weblogic prints a line saying something like asynchronous operation with the null Server address. If the line is printed sync has arrived and you're good. In case you do not see the line to reboot once again and you will see the line after which you can restart with the new credentials.

• Satellite Pro A210 PSAFHE - Windows 7 - crashes after the sleep/hibernation

  I have a PSAFHE Satellite Pro A210 running dual boot Windows XP/7
  With the help of Windows 7 - 32 or 64 - system always crashes after sleep/hibernate mode.
  This never happens with XP that sleeps and hibernates OK...
  There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  I like system 7 and use it on my other computers but without sleep/hibernate, I go back to XP.

  Hello

  > There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Sorry, mate, but you're wrong.
  All drivers for Win 7 for Satellite Pro A210 are available on the European driver of Toshiba page that I recommend you check out once again

  Given that this question does not appear using Win XP, I can say with certainty that this has nothing to do with the material, but it s a software related issue
  I recommend updating the graphics card driver

  In addition, there is a new BIOS for Satellite Pro A210 PSAFHE it s v2.0
  Check if you are using the latest version

• C850-1cp problems through satellite after the change of Italian keyboard

  Hello

  I bought a toshiba Satellite C850-1cp and I had some problem (I dropped a coffee on the keyboard)
  so I brought the mobile for technical support and I decided to change the native keyboard (FR) with an Italian keyboard, and now I have the problem with the usb port: a mouse or other usb devices are not recognized.

  One of my friends told me to restore win 8 unsuccessufully because the function keys do not work...
  Please help me

  > now, I have the problem with the usb port: a mouse or other usb devices are not recognized.

  What exactly do you have after the replacement of keyboard?
  Have you installed new system or what?
  The USB ports worked before the replacement of keyboard?

  Satellite C850-1cp was pre-installed with Win 8 64 bit.
  Usually, you should be able to load the original image.
  Switch on and press F12. Now you should see recovery of HARD drive option.
  Is it available?

• Satellite 1400-104 crashes after the MBR softwarepackage

  Hello

  It is of a Toshiba Satellite 1400-103 (512 MB of memory). On startup, the Satellite works very well, no problems with surfin or broadcast, but when I run a main softwarepackage (such as Macromedia Dreamweaver or MS Word Excel), the PC freezes after a minute or two.
  I feel that the fan suddenly starts turning and the computer crashes. The only thing I can do is turn off taking the startbutton about 10 seconds, then turn it back on.
  I have already reinstalled Windows XP, but the same problem occurs after two weeks. My Antivirusprogramm works very well and I check every week on spyware and software malware.
  Does anyone have an idea about this problem?

  Thank you

  Hi emoreau

  Can you please tell me if there is the same problem without using this software package?

  The cooling fan usually begins to work if the processor speed increases and run under full power. Is this software that you use a complex and superior application?