Toshiba All In One LX830 - function keys lost after installing Win 7

Similar Questions

• Function keys lost after installing XP on Equium A200 PSAF5E

  Hello
  I installed Xp on my Equium A200 PSAF5E and there goes MUSH FASTER!
  But I lotso function keys, I was expecting
  Any idea on how I can put them up yet? Any software, driver or what else?

  Thank you
  Simone

  Hello Simone

  If you want to downgrade OS on your Vista preinstalled laptop, it's very important to do BIOS update. If I remember correctly, it must be updated to BIOS version 5.20. Please check on the Toshiba download page.

  After the BIOS update, please install all the stuff of the Toshiba download page according to document Instructions of facilities. The order of the facilities is very important. In this case, everything should work well.

  Please be careful with the update of the BIOS. Download update for your model of laptop tracking number PSxxx. Before you begin to update BIOS don't forget that the laptop is connected to the power supply current.

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Need remote control for Toshiba all-in-One LX830

  Hello

  I recently bought a LX830 11 d for my mother.
  The unit is ex-reparation but don't know if that actually meant to have a remote for the TV feature support.

  If she was supposed to have one then it is absent and dealer is not sure that they are not.
  Is it possible to buy a new remote or if there are compatible options available.

  According to the Toshiba LX830 - 11 d
  Page of the specifications, the remote control Windows Media Center was part of the delivered equipment.
  http://www.Toshiba.EU/discontinued-products/Toshiba-lx830-11d/

  I think that this remote control could be ordered in the Toshiba authorised service provider available in your country.
  Give them a call and ask for this part.

• HP 6510 e - All in One, front function keys face B211a

  When I turn on the computer, the demo begins to run and never leaves.  I am currently using Windows 8, but started while I still had Vista.

  Press the front of the printer to stop cycling through the different pages. Press the home button on the top left corner of the screen. Tap the key on the top right of the screen. Touch tools. Scroll down until you find the demo Mode. Select the demo Mode. Set OFF demo Mode. Press home to return to the home screen. To disable the demo Mode for you.

• OfficeJet J4680 all-in-one: J4680 does not work after installing windows 10

  I have recently installed Windows 10 on my Dell laptop.  Yesterday, I was able to print wireless at my J4680 JO.  Today, I tried to analyze, and he is identified as not online.  Can't print now.   I turned off laptop, router and printer and restarted.  I added the latest driver.  Still no luck (in print or scan - still says offline).  Help, please.

  Thank you

  Hi @mlanders55,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, since the upgrade to Windows 10. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the printer software already, I'd say to start it there first. Here is the link to the latest drivers: OJ_AIO_J4600_Full_Win_WW_140_408 - 5.exe

  You can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor?

  I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

  Please let me know the result and if there is anything else I can help you. Thank you.

• some characters on the keyboard doesn't work don't not after macos sierra installation keys on one side does not not after installing sierra on my mac pro book

  keys on one side does not not after installing sierra on my mac pro book

  Hello dssheorey,

  Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:

  Reset the management system (SCM) controller on your Mac.

  If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  See you soon!

• Satellite A500 - sounds/images of default system lost after installing Win7

  Hello

  I bought a Toshiba Satellite A500 with Windows Vista and upgrade to Windows 7. After my installation of Windows 7, I lost all my icons of Toshiba and sounds, as silent image appears so hitting the button mute on the keyboard and the beep on hitting the sound up/down button.

  Before installing, I took a backup of a file from Toshiba and tried to install apps from Toshiba in the TOSHIBA\TOSAPINS folder there. But still not get the default values of the system.

  Would be very grateful if someone could help me to restore those back.

  See you soon,.
  Vikram.

  Hello

  I assume you mean on the menu that appears with the FN keys

  Usually after installing Win 7, you must reinstall the VAP (value added package) and utility Support Flash Cards in order to get the keys FN working again.
  You can download the two page from Toshiba Europe tools.

  I m not very good if you get the same sound that was available under Vista as Win 7 takes care of the own system alerts/sounds.

  But after the installation of VAP and Flash Cards Support utility, you should see the images that appear with the FN keys.

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• Microsoft Media all-in-One keyboard functionality issues

  * Original title: all-in-one Microsoft Media keyboard problems with Windows 7

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB Ram with Windows 7 Ultimate edition. I use the PC as my entertainment system, so I'm under a dual tuner HD (black gold) and a distance from the media library. The system is contained mainly used for the center of the media, but also streaming from Netflix etc.

  I recently bought a multimedia all-in-one of Microsoft keyboard (previously I had been using a keyboard and wireless Microsoft mouse), installed the drivers successfully. However, the keyboard does not work properly. The problem manifests itself in many ways, in media library, I can't select (i.e. the click doesn't sem to function either by using the left click button or clicking with the trackpad) and the window controls appear not (close/minimize/MediaCentre button) when I move the mouse pointer. When I do not press, the keyboard seems to be more reliable when used all first, but then after a few minutes, it no longer responds to click on requests then I need to remove the computer USB dongle and re - insert to get the keyboard to start to answer again.

  I have all the latest drivers, and the system is constantly being updated.

  Any ideas?

  R

  Hi Richard,

   
  Thanks for the reply with the details of the question. Sorry for the late reply.
   
  Based on your response, I understand now that the lies of problems when you use the media center remote control and keyboard from Microsoft together all-in-one media.
   
  I suggest you run the hardware troubleshooter to check if it detects a problem with the hardware.
   
  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It verifies the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly
   
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  If you still have questions, please refer to the article below and check that helps.
   
  Understanding of mouse, keyboard, remote control and touch input
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa468225.aspx
   
  Please reply with the results for assistance, we will be happy to help you.

• Toshiba all-in - One DX1210 - remote control no longer works

  Hello

  I have a DX1210 (PQQ09A - 02900G), and I have a question where the remote works fine when I start the machine for approximately 15-20 minutes, then it just stops working.

  There is no error and cannot find anything if you set.
  Again, only way to make it work is restart or put it to sleep and then wake it up again to the top.

  Yet lasts only another 15 minutes or more.
  Someone at - he encountered this before? Running Win7 64 bit.

  See you soon,.

  Nathan

  Hello

  Have you checked if the reinstall/update driver would solve this problem?
  I think you should check this

  There is a driver called Winbond CIR driver
  http://www.MyToshiba.com.au/support/computers/all-in-one/dx1210/pqq09a-02900g/download?OS=25

  You have to uninstall it first and after new reboot, install this package again.

• Tecra M9: Where to find the function keys drivers/software for Win XP

  HI :)

  What kind of drivers (where can I find it?) supported function keys in Toshiba Tecra M9 - 12R?
  I'm interesting in screen brightness control keys. Thanks in advance for any helpp :)

  concerning
  Wojtek

  All drivers and utilities, you'll find the European driver Toshiba page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note that you will need to install drivers in the correct order.
  On the Toshiba driver page, you will find the installation instructions txt file.
  Follow this order! This is important.

  Good luck

• Hewlett Packertt all-in-one 19: Recovery Windows 10 re - install software

  I need Windows recovery software for my (HP all-in-one 19) my old work files are everywhere in my PC and administrative privileges to keep prevents me to exploit my home PC! I adjusted the permissions but it is somehow related to my former employer via a mini port or somehow I do not know.  I use Wifi but my PC won't finish Journal.jnt (read-only) Note! Pop - up says that the Windows PowerShell folder is deleted or that I don't have permission... Ugh! It's frustrating to not be able to close this Note of the log dam! How can I install Windows on my PC without buying the software CD? any advice would be great!

  Hello elynch4976 ;

  Let me welcome you on the HP forums!

  I read your post about your multiple problems with the all-in-one and wanted to help.

  After your comments, looks like your PC has been, or still IS, a part of a commercial domain.  When I was working from home using my HP laptop, it was joined to a domain automatically as part of the connection.  It was configured this way by people from TI to the work.  Once the PC has joined the domain, I lost all the rights of administrator and owner of everything, except in special circumstances, I created files.  It looks like what happens to you.

  One solution, if that IS the case, is to have the computer work reconfigures your PC so that it is more so part of their domain.

  Another approach is to what you suggest - do a factory reset from the PC using something known as HP recovery media.

  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.

  Or, if you prefer, you can do the same by contacting HP Customer Service:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.