Toshiba E-studio 163 printer - cannot print

Similar Questions

• Toshiba e-Studio 167: printing documents ODT LibreOffice 4 Linux problem

  Hello

  I'm trying to solve a problem when I try to print some documents ODT of LibreOffice 4 (13.04 Ubuntu operating system) on a Toshiba e-Studio 167 printer.

  I have not received any response from my service technical so I hope someone can help me here.

  When the document contains fonts as liberation, liberation Serif, etc., I get a printed page with the following error:

  ERROR:
  invalidfont
  THE OFFENDING COMMAND
  $definefont
  BATTERY:
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  --nostringval--
  17

  However, if export ODT file in PDF format and print PDF files or if I print another PDF Acrobat file, it is not a problem. It works too, if I print a document Word (doc) opened to LibreOffice (usually with a Times New Roman font); in this case, LibreOffice indicates that the document has Times New Roman font, although it is not installed on the system, at least I can't see fonts in the drop-down list. In these cases, that the document prints well, but the new ODT documents with fonts system fail, what happens?

  If I print in a local printer (HP Laserjet 1020), he has no problem with any document.

  I tried to apply the solution given in the son, but if I change the type of PostScript printer language, I get the same error:
  https://AskUbuntu.com/questions/69014/unable-to-print-from-LibreOffice
  https://AskUbuntu.com/questions/68909/problem-printing-in-LibreOffice-writer-but-not-in-Adobe-Acrobat-Reader-or-Evolut

  This is how I installed the printer driver:

  https://localhost:631
  Administration-> "Add printer".
  The wizard has automatically detected the network printer: Toshiba e-Studio 167 Foomatic / Postscript (en)

  This site says that the printer works under linux:
  https://www.OpenPrinting.org/printer/Toshiba/Toshiba-e-Studio_167

  Any help would be apreciated.

  Thanks in advance
  Juan José Alonso

  News about your problem?

  I found this page from Toshiba on e-STUDIO167
  http://business.Toshiba.com/USA/product/multifunction/small-workgroup/e-STUDIO167.html

  This brings me to the managers for e-STUDIO167
  http://business.Toshiba.com/support/downloads.jsp?SELCTD_MODEL=e-STUDIO167&AXN=SELCTD
  Unfortunately, there is no driver official Linux so can't say for sure if this printer is compatible 100% linux.

• Toshiba e-Studio Ghost Prints

  Hello world
  I have a very strange problem ever happen before... I use Win 7 and I have toshiba e studio 351 in my local network with other computers, until a few days ago, I was using eStudio-451 drivers and work perfectly for 1 year. A few days ago it stop printing, quite strange because:

  -the works of Copier
  -works to scan
  -J' use a static local IP address and I ping, all packed went well
  -tcp/ip active and all the other stuff, everything is OK
  -I can access the printer by IP address in any browser and change the settings
  -drivers installed/uninst etc seems to be OK in my PC

  Windows displays printing OK, the document "printing" to disappear, it's as if the printer eat. No jobs are showing in the job_status the printer...

  Any problem like this before?

  Thanks for your time

  Hi mate

  I m do not know if someone here in the forum would be able to provide support here since it is a laptop computer and the multimedia forum.

  But I found a nice page of Toshiba, where you could find support for printers and faxes:
  http://business.Toshiba.com/USA/support/training/index.html

  Here's a nice training for the priner video, you own
  http://www.toshibamedia.com/451C/CBT-451c031-load.html

  Hope this might help you a bit

• My Dell Inspiron 1564 does not detect my TOSHIBA e-STUDIO desktop printer 452 connected via LAN

  When I'm at the office, I connect the printer to the office via LAN.

  I am not able to print any document directly from my laptop even if my local network connection is direct and functional.

  Hello

  I reloaded the printer driver and tried to use the LAN printer and it worked. Many thanks for the suggestions.

  Vincent

• Toshiba e-Studio 206 - I want to install local printing to Cent OS 6.4

  I have Toshiba e Studio 206 and 207 and Cent OS 6.4.

  and I see in the building after command lsusb

  [root@m4-novnik ~] # lsusb
  Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
  Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
  Bus device 003 002: ID 08 6:8012
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 001 Device 003: ID 0749:1000 never Electronics Corp.
  Bus 004 Device 002: ID 093a: 2510 optical mouse Pixart Imaging, Inc.

  CUPS, version 1.4.2

  connected USB 2.0. -Bus 003 Device 002: ID 08 6:8012
  I want to install local printing.

  Help, please.

  I'm quite skeptical and I do not think that someone on this forum will be able to help with this.
  In my opinion, you have more chances of getting help on Linux forums.

• Toshiba E-Studio printer - want to manage user impression in HIGH-LEVEL

  Hello

  I have several Toshiba E-Studio printers and I want to manage user impression in HIGH-LEVEL (my users are in Active Directory in Windows 2003)

  I tried but I can not connect department code with users of the AD and I keep getting my printed documents as invalid.
  I hope someone here will know how to solve this problem

  Thank you

  I have fear of m in this forum you will not find the printer experts.
  Most of the users here in this community are common for laptop / tablet or multimedia enthusiasts.

  But I found this page of Toshiba's interactive training manuals.
  http://business.Toshiba.com/USA/support/training/index.html
  These tutorials can help you learn how to perform various functions to your device e-STUDIO user

  It might be useful for you.

• Toshiba e-Studio 3040c continues printing from other sources

  Hello together

  In our society, we have a Toshiba E-Studio 3040c next to other printers.

  It prints and basically works well, but we have the issue that if a source document is empty, it continues printing from other sources, even if there is another paper out there.

  The only point in the Web interface with: "Change the paper source automatically" is set to NO then it theoretically it should continue printing.

  Any suggestions I can try next?

  Thank you for your adived

  Erik

  You solved this problem?
  I m asking because this community forum talking about Toshiba digital products like laptops, tablets, and TVs
  I doubt that you will find here a few specialists printer.

  However, I recommend you to check this page from Toshiba for printer product information and specifications
  https://electronicimaging.Toshiba-Europe.com/

• Toshiba e-studio 206 does not print USB cable

  Hello! We have Toshiba e studio 206 which is installed with the usb cable.
  Official drivers for e-studio 206 granted official website (here and later - a Russian) had been installed without error, the device shows any errors as well and can be used as a copier or even scan via the usb cable.
  But when I try to print at least a test page - an error in the spooler window.

  Install the drivers, the printer as a COM-device. I read on the official website that this is normal.

  If Windows 7 (32 bit) - in the window 'Printers and devices' there is the printer itself AND a strange unknown device called TOSHIBA e Studio 206 (COM3).
  On Windows XP, it is all of the same except there is not that strange device.

  I'm sorry if I posted in the wrong forum, but given that this thing is a copier at the top (or so I think...) ...

  P.S:I tried using different USB cable - no effect. I guess, I'll try another while you wait for your kind answerrs... Thank you!

  Hello

  Have you installed other printers or drivers next to Toshiba e-studio? If Yes please try to remove them and test it again.

  In addition, I would recommend to reinstall the drivers for the e-studio again. Delete the current version and restart the computer. Then install the latest version you can find on the page of Toshiba.

• Does not print without the rights of administrator - Toshiba e-studio 2

  Excuse for my English.

  A question: does not print without administrator rights.
  I do not know is that a problem?

  As it is possible to allow for the press with the rights of the user.

  Toshiba e-studio 206

  Hello

  You intervene on the Toshiba printer

  According to your message, the printer does not and doesn't print because the user does not have authorization right.

  You can change try to assign the admin right to the user account.
  You can also try to assign only a right to the user account.
  In this case go to-> printer & faxes Control Panel
  Choose the printer-> right click-> properties-> tab security

  There you can assign printer preferences

  Welcome them

• What is the Toshiba e-STUDIO C 2540 print photos?

  I was wondering if it will print on photo paper, good or not?

  Hello

  Yes, you can print photos on Toshiba e-STUDIO C. 2540

  For more information, contact Toshiba:
  http://copiers.Toshiba.com/USA/support/training/index.html

  Check if that helps.

• printer drivers for toshiba e-studio 605 64-bit for Windows 7.0

  I need to install tohsiba e-studio 605 in the 64-bit version of windows 7.0, thank you for giving me the location

  Hi Magnoor,

  Download and install the Toshiba e-studio 605 from the link below and see if it helps.

  http://www.Estudio.com.SG/download.aspx

  Good day!

• Re: Drivers for Toshiba e-STUDIO 160

  Hi, I have an old toshiba e-STUDIO 160 MFP and I was wondering can I use it with Ubuntu Linux.
  I am looking for drivers, but without result.

  You can help me because all my PCs are Ubuntu Linux, and they cannot function without a printer.

  But you now that Toshiba doesn't support Linux, right?

• PROBLEMS of FAX Toshiba E-Studio 250

  Hello!
  I don't know if this is the place to post my problem...

  I have a Toshiba E-Studio 250, and I have a problem of fax.

  I have a fax / Tel (RDS & RCS - my local provider) connection

  Now, my problem:

  When I am reciving a FAX - my 'PHONE' will Flash for a few seconds and nothing happens.
  When I'm sending a FAX same old story, the 'PHONE' flashes and nothing happens.
  If I press the "MONITOR" button, I heard the fax tone.

  My Toshiba has a 'LINE' jack so I divided the two-1 cable cable goes on the phone and the other in the Toshiba.

  Hope you understand my English is not so good. Thank you one Please HELP! (I'm desperate)

  Hello

  It is a forum on the problems of laptops and options & Accessories questions.
  If don t think that if someone would be able to help you here, but I found a manual for the 250 e - Studio
  http://www.Toshiba-SA.NET/download_operator_manuals/e160_200_250/e-STUDIO_160_200_250_Operators_Manual.PDF

  Here you can find the Support from Toshiba page to print, copy, Fax, Scan and e-mail devices
  https://electronicimaging.Toshiba-Europe.com/

• Toshiba E-studio 160 - password LAN interface

  I have a toshiba e-studio 160 episodes, with the ethernet card.
  I have to change the tcp/ip options, I need to know the password!
  (please, do not ask why I don't ' know :_|) )

  I read somewhere that it should be possible to display the admin password by:

  1 feed the machine in TEST MODE (press 0 & 8 by turning on)
  2 enter 263, then press START

  Point 1 it of ok, but 2 is not ' return any information.
  The page where I read this trick was perhaps for another model, different e-studio 160, and so I have to type another number...

  I hope someone could help me :)
  Thank you

  Matteo

  Hi dude

  Here on this page you can find the Toshiba page which provides manuals and software for printers, fax, etc.
  https://electronicimaging.Toshiba-Europe.com/

  Manual options choose please:
  Managers of document-> E - Studio 160

  Here you can find some instructions (network, printers, etc.) that might help with this problem.

  Good luck

• Driver Windows 7 for Toshiba E Studio 166/206

  Hi all

  I am looking for a driver Windows 7 for Toshiba E Studio 166/206

  Help, please

  Kind regards

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask in their forums.

  The Windows Compatibility Center shows the e-Studio 166 that is NOT COMPATIBLE with Windows 7.
  It doesn't seem to be an entry of 206.

  Windows Compatibility Center - 166 not compatible for 32 or 64-bit Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Toshiba%20E-Studio%20206%20all-in-one%20Printer&results=50&compat=Incompat&OS=32-bit

  E Studio 166/206
  http://www.Estudio.com.SG/download_166206.aspx|

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">