Toshiba Excite Pro - WIFI dropouts very often

Hello

I recently acquired a toshiba excites pro 16 GB tablet.
The problem is that I * disconnections wifi * very often, so that all my other devices still connected at the same time.

When falls the wifi, it is very difficult to reconnect even if I restart several times the Tablet (perhaps after the fifth, but it remains not connected for a long time).

If I stop the Tablet for a while then I connect immediately - until it disconnects.

I already get into recovery and restored the tablet with no result.

Any suggestions?

Try this:

Go to advanced wireless settings and check if + WMM + is activated.
This option must be checked to have a stable connection between the Tablet and route

Tags: Toshiba

Similar Questions

  • Toshiba EXCITE Pro - WiFi. Authentication failed after update

    Hello.

    Just got this tablet.
    Everything seemed ok by updating to the latest version (because first of all to solve the problems of heat).

    After the update * I lost my WIfi connection. Failed authentication * (has not changed anything - linked - update ok 1 minute before the last update).

    After that I started to not test, Wps, Wifi etc etc security connection
    * Finally, at a random time (and with the original settings) I logged in *. After that I closed the Tablet the same problem occurred.

    After doing the same things again once I finally logged and this time it seems to be ok, even though I stopped the tablet.

    However, it's frustrating.
    Maybe you have to address this issue?
    I have seen and others return this tablet after having this problem.

    It is not a hardware problem since its correct operation before the update.
    Of course tried factory reset twice.

    Hope, I don't have this problem again, * but I inform in the hope that fix you this in a future update.*

    Hello

    Go to your wifi settings - forget your network - connect again with your code

    Normally after that he has to work again.

    Concerning

    Post edited by: Fulgore

  • Toshiba Excite Pro - Excessive battery drain

    A few weeks, my Toshiba excited Pro started draining battery standby time ago tomorrow. He's going in less than 24 hours from full to empty. On the battery monitor, it says 'Tablet standy' is originally battery drain - isn't an app has become crazy.

    I tried to restart, I tried to use not all the apps that I have installed, I even tried a factory reset. Yet the battery drain. I have a feeling that it could be linked to an update of the infrastructure of the Google Services.

    Anyone who knows the same problem? I guess we need a firmware update to solve, and I'm not optimistic to see everyone.

    So should I return it? I'm put off by the clause of the Toshiba warranty that says they're going to charge me 60 pounds if the Tablet 'requires only an update of the firmware'. I think it is exactly what it takes, but first Toshiba would need produce the new firmware. I guess I should go through the retailer then?

    Up to now nobody has reported such similar behaviour of the Tablet and so I think that the theory about the Google service infrastructure could not be completely correct. But that's just an assumption...

    AnywayI read some reviews on the battery drain problem in mode 'sleep' with other android tablets.
    Someone wrote that partition the cache wiping system can help if the appliance starts to behave strangely or slowly, or in the case where the battery would start to shift very quickly.
    System cache partition is a system such as the log files data storage area, frequently accessed data app which has been temporarily put in cache, and downloaded apk Installer files from the game of Google.

    In order to clear the cache partition, you need to access the Recovery Menu (button / stop + volume up).

    However, there is a proposed solution that has been suggested by other users of android. Not sure if this might help you.

  • Toshiba excites Pro AT10LE-A-108 the battery

    Hey everybody,

    first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
    Everything was good except the battery won't charge.

    He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.

    Then I got a brand new Toshiba excites Pro AT10LE-A-108.
    I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."

    After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)

    Now its all yours :) It is just bad luck, or is this a common problem?

    What I have to change something in the settings?
    I don't know and I'm not going back again via post :(

    Best regards, Tom

    Hi Tom

    I don t think that it is a case of some incorrect settings.
    To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.

    I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.

    On Toshiba supports support ASP page, you can find the service partner in your country in the region.
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  • Update of Toshiba excited Pro ATLE-A-108 4.4

    Hello everyone,

    I would like to know if the Tablet 'excited pro"- ATLE-A-108 will be updated to android 4.4.

    Thank you.

    Jonathan

    I think you can get this information directly from Toshiba only.
    It is just a community of users and unfortunately information about new updates Android has not been published on the pages of Toshiba.

    But let's hope that this update would be available in the future.

  • Toshiba excited Pro AT10LE-A-107 - maximum capacity of SDHC card

    Hi all
    I have this tablet for two years, a few days of warranty now. I decided to attach a larger SDHC card.
    Having two cards

    32 GB SanDisk Extreme SDHC micro and 16 GB SanDisk Ultra SDHC I. The two cards are not recognized by this tablet.
    The two cards are formatted to NTFS in the laptop, because I want y videos app 5 GB.
    Card maximum recognized size is an 8 GB card.
    In this description, there is no maximum support for the SD card capacity:
    http://www.Toshiba.EU/discontinued-p...-at10le-a-107/

    Any suggestions what to do?
    What is the maximum SD card that is recognized in this device, please?
    Thank you
    RoSy

    OK, tried to format the card with exFAT. Card 16 GB recognized.

  • Toshiba Excite Pro - Toshiba service station has disappeared from my Tablet

    Toshiba service station has disappeared from my Tablet (and there is no checking system update option in the settings). What is the problem? (no root or any modification of the system.) Systeme_d'_exploitation - 4.3 android). How can I download it again?

    Try resetting the Tablet back to factory settings.
    Press and hold the volume button upwards and the Start button / stop.
    A menu appears then where you could choose factory reset by using the buttons up/down volume.

    But beware: all data will be erased!

  • Toshiba excited the Pro AT10LE-A-109 tablet screen

    Hello

    my Tablet Toshiba excited Pro 10.1 AT10LE-A-109 inch screen is broken.
    I am trying to buy a new one.

    My questions are:

    1. is the screen called 'screen glass digitizer "?

    2. I found the next part on Ebay - 'Toshiba excite Pro AT300 AT305 10.1 Touch Screen Digitizer glass lens part 10' outdoor, it works for my Tablet?

    3 AT300 scanner of the series works for my Toshiba excited Pro 10.1 inch tablet AT10LE-A-109?

    4. can I replace the screen on my own?

    5. I found one online, but is not in the USA, do you know any place that sell this part to the United States?

    Thank you very much
    Mahmoud

    Message has been changed - removed commercial links

    The screen called 'screen glass digitizer "?

    In line with the Tablet Toshiba screen that is built into the page it is called - Toshiba PixelPure WQXGA 10.1 IPS "high-brightness touchscreen

    I found the next part on Ebay - 'Toshiba excite Pro AT300 AT305 10.1 Touch Screen Digitizer glass lens part 10' outdoor, it works for my Tablet?

    I guess this can be answered only by the merchant who sells this part.

    AT300 Series digitizer works for my Toshiba excited Pro 10.1 inch tablet AT10LE-A-109?

    I'm not sure about this, but I guess that these two parts are different. In addition, AT300 screen resolution is lower and probably both screens supports different connection available to the pins...

    I can replace the screen by myself?

    Have you done something like this in the past? I guess that this replacement is very delicate, and I guess that a common user will be unable to such product be upgraded successfully...

    I found one online, but is not in the USA, do you know any place that sell this part to the United States?

    Toshiba excited Pro AT10LE-A-109 is out in Europe... I guess that the compatible parts can be ordered from ASP located in Europe.
    However, you can also try to contact the authorised Toshiba partner in your country and could ask such compatible screen... maybe, they will be able to provide these compatible parts.

  • Change the language using the cover of keyboard to excite Pro AT10LE-A-108

    Hello

    I bought a Toshiba * excite pro AT10LE-A-108 / PDA0EE tablet (Android 4.2) *,.
    It's Toshiba * UK cover of keyboard (English keyboard) / PA5132E-1EKB *.

    I want to change the language by using the keyboard from English into Greek.

    The tablet includes Greek for the supported languages, I can write about it in Greek
    but I can't change it is + keypad +.

    Can someone help me to do?

    I assume that you have not configured the settings for the external keyboard.
    In Android settings: language and entrance you need to find the option to set up the input method

    Downstairs, you will get the option for physical keyboards.
    Him that you have to touch the Bluetooth keyboard. Then you should be able to choose the keyboard configuration. Now select the language of the keyboard.

    In the new window, you will find the advanced option
    Here, you can also choose the layout for external keyboards

  • Excite Pro AT10LE-A-108 - enrollment fails - no network connection

    Hello

    I bought the Tablet Toshiba excited Pro AT10LE-A-108 with SN XD187362S on July 14, 2015 and the product was shipped to me on August 22, 2015.

    After the Android 4.2 update registration of the device fails every time that I reboot the system, after about 1 minute, with the network error message.
    No internet connection available. Connect to internet, and then try again to update your software.

    In addition, I can't use the Toshiba App Manager (App Installer), with the same message.

    My Internet works perfectly, so the problem is elsewhere.

    What should I do?
    Thanks for your help!

    Hey Felix!
    I had the same problem for a long time now, with my Toshiba excited AT10-A. It all started after leaving my Tablet for services (workload issues). Please tell me if and how you resolved this issue. I googled a lot but did not find anything useful. It's really frustrating with the enrollment of device message... #£@ % #! % # !
    See you soon

  • Very often slow wifi internet on my Probook g2 450 brownsey

    device: Hewlett Packard Probook 450 G2 (J4s43EA)

    operating system: windows 8.1 pro x 64

    Windows updates: the latest

    BIOS: last

    drivers: on the hp device driver site

    problem:

    Very often, but not always my internet speed is slow down.

    (Web sites needs 1 to 2 minutes to load)

    In this case, I have to disable my firewall and virus scanner, close the browser, and start again, but nothing has changed.

    And in this case, I used to test the android smartphone: use of wireless network for display of web sites and internet on my android device loading speed is absolutely normal, but the speed of the internet on my laptop is slow.

    What is the problem?

    I solved my problem:

    1. the avast Internet security is impossible works perfectly on this machine, you must uninstall avast Internet security and install avira security online.

    2. need to install the latest driver for the wifi module:

    Click here

  • Excite Pro AT10LE-A-108 - WiFi of abandonment

    I have an excite Pro AT10LE-A-108 and (as well as suspended too frequently) almost every time that I try to use Chrome or Firefox it disconnects from the WiFi signal.

    The router is not the problem, as many other cameras use it without any problem.

    Any suggestions gratefully received.

    K

    Hello

    I recommend you to reset back to factory settings table.
    You could do a hard reset, press and hold the volume button upwards and the Start button / stop.
    Choose the factory (in the middle of the 3 choices) settings using the volume button to navigate.

    Note: your data and settings will be reset too!

  • Excite PRO 3G connection does not work after last update Android v4.3

    Hello

    I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

    After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

    My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

    Please help me.
    Thank you

    > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

    Go to mobile network settings and search again for the 3G network.
    I had a similar problem with my Android Smartphone and my o2 provider
    I started to search for new, so I chose the O2 again and then I could solve the problem.

    In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

  • Toshiba Satellite Pro S500 i5 or i7 i3 CPU upgrade

    Hi everyone, I'm having 7 Toshiba Satellite Pro S500 Notebooks here and want to update these shit Core i3 330M and 350M, 370 M and 380M CPU for Core i5 or Core i7 CPU. I'm not quite sure what CPU Socket, I have to buy and which generations of CPUS are supported by the S500. I processors up to 380 M Corei3 assembled in these things now and think its a HM55 Express chipset inside which must allow to i5 and i7 processors. I already had problems in upgrading toshiba tecra A9 modells and after upgrading CPU they were running very well and the FAN was blowing ultra noisy at speed of 100% all the time without ever turning off again even if the laptop could be frozen at 0 ° C and it has never been warm. Level 3rd Toshiba support then told me that he would need a firmware update they do provide customers and was told to send books to repair @ € 50 each, just to update this microcode. So I would ask if anyone has a list of processors supported for the S500 modells?
    Numbers of exact model I have:
    Satellite Pro S500-106 (PSSE0E-19M06SLD)
    Satellite Pro S500-147 (PSSE0E-0HH06SLD)
    Satellite Pro S500-132 (PSSE0E-09G05ELD)

    Hope someone can help, I don't want to end up buying an i7 or i5 cpu, spending 50 dollars, investing 4 hours work and end up with a laptop unusable, I immediately dismantle again just for the work that I had invested... Forward your answers J

    Best thing to do is to choose a CPU provided with one of the other S500 PSSE0E patterns. This way you can be sure the BIOS supports.
    Some portable computers require a cooling system calibration after that another CPU is installed. An ASP can do the calibration.

  • Satellite Pro A200 - display very dark

    My first post on this forum-

    I have a satellite a200 pro with a very dark screen, it works fine with an external monitor.

    I replaced the drive and the full screen with elements well known with no joy

    am I missing something simple? any thoughts welcome

    > I have replaced the drive and the full screen with elements well known with no joy
    That s very strange and to be honest I can't say with certainty why these spare parts not help you solve this problem. Is the external monitor looks OK and the chip chart isn t the troublemaker. So the problem must be linked to the internal screen or FL inverter.

    I recommend you contact the service provider authorized Toshiba to get more details about these issues and get compatible parts.

Maybe you are looking for