Toshiba Kira - screen flashes red green blue black

Similar Questions

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.

• 2407WFP Power Save mode - only flashes red, green, blue, black, white, repeat

  Hello

  My 2407WFP won't go into fashion, economy of energy even when the computer is off. (He used to do this properly).

  When the computer sleeps, turned off, or when the cable is disconnected, the monitor will be full-screen flash red, green, blue, black, white, then go to sleep for about 5 seconds. Then, he repeats this sequence instead of going right to sleep/wake.

  Different computers, different cables, no change. Is it possible that this is somehow the self-test mode?

  Thank you.

  * Turn off the monitor
  * Press and hold the plus button and menu button at the same time, and then click the power button
  * Once back on, press the "-" and the service menu should appear
  * Press the button "-". The Service Menu should appear
  * Scroll down to Burnin Mode using the button ""
  * Press the Menu button to turn on this setting
  * Press the button "-" to turn it Off (it should be blue when selected)
  * Press the "+" to highlight the Menu exit
  * Press the Menu key

• Dell Inspiron 5160 - screen showing red, green, blue, white, black alternatley

  I looked through the forum to find answers to this and have found nothing so far.

  The computer, when it is turned on, does not display the BIOS (or POST); It goes straight to the screen showing the red, green, blue, white and black alternatley at about 2/3 second intervals. This sequence is repeated.

  He did at the first stop of the loop and show a version hurt badly formed of what I had on screen before it started doing this.

  I tried to restart (turn off by 6 second hold button / stop and remove the battery and power supply).

  No more recent hardware changes.

  Works with Windows XP Pro SP2.

  64 MB Nvidia GeForce Go 5200

  3.06 processor Pentium 4 GHz

  1.25 GB OF RAM

  * Edit * SXGA + 15 "screen

  Help with this is appreciated the most.

  Paul

  Message edited by paulskinner on 04/16/2008 14:57
  Message edited by paulskinner on 04/16/2008 14:57
  
  

• HP Omni 120-1050xt: screen goes to red, green, blue, white, black after upgrade to Windows 10

  When the PC is idle, the screen turns red, green, blue, white, black, and every time I need to turn off the machine. He said "best driver for your device is already installed" - Intel HD Graphics. I tried to uninstall, install.

  Greetings,

  HP not support your PC when you run Win 10.

  I suggest that use the "Go Back " process win 10 ASAP.

  If this is not possible because of your graphics problems you'll have to do a restore to factory HP.

  I can help you more with this if you wish.

  If the upgrade was forced on you there are ways to stop the involuntary update.

  Let me know if you need further assistance.

  Jay

• 32D1334B LCD TV - not light power light flashes red & Green

  I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.
  When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen remains black.

  I had to take off the back, watched and deleted all the parts, but can not see the obvious problems. I also a multimeter and power to the various sections of the TV is, but that's as far as my electrical knowledge goes!

  I don't really know what else to try, but I am very reluctant to throw away the TV that I know it's probably a unique piece that needs to be replaced to fix it. I searched online and others have reported the same problem exactly, but it had not resolved there always. Unfortunately, TV is more under warranty... If anyone has any suggestions or can provide any help, then it would be greatly appreciated!

  Thanks in advance.

  If you find out how to fix it please let me know because my tv is the same.chris

• Precision device 60 spitting red green blue color bars

  Hello world.

  We have two precision 60 camera running SpeakerTrack through a C40. Camera works fine but the other one spits of the colored bars - see below. Reboot the camera solves the problem for a week or two and then it returns. Someone saw something similar or have any ideas why this is happening? The system of control of the House is a Crestron DMPS300C. Is it possible that the code on what could be triggering some mode in the camera?

  Any help would be appreciated. See you soon.

  camera_bars.PNG

  

  Hi David

  Greetings of the day!

  If even after the upgrade to version TC7.3.6 of such software suggested by Magnus above, problem persists, you can perform the reset of the camera of the P60.

  Here is the procedure to perform a factory reset:

  1. Locate the button hole of PIN at the back of the camera.

  2. use a pen or similar to push that button reset for 10 seconds.

  3. the camera will be LED in red over the factory reset.

  4. when the reset is complete, restart the camera and the camera LED lights.

  You can also check out the link that explains the above procedure to perform the factory below reset the P60 camera:

  http://bcove.me/f17trop2

  If even after the factory reset issue persists, you can contact TAC and they can provide you with the replacement of the camera of the P60.

  Concerning

  Radhika Sajan

• We have installed lightroom CC 2015 and imported some photos when we change to develop we get the image displayed as a heatmap with only red/green/blue points/lines. All filters are disabled...

  

  Hello roberto,

  Please follow the steps below.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  
  

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Black screen appears in green on the Satellite

  It is a problem that sometimes occurs before which would be fixed on close down and restart. But now, it seems not extinguish. Most of the black spots and a few other colors appear in green. for example, the black toshiba start screen appears entirely green with the usual letters. And after starting, there are green stains all over, especially there where it should be black.

  Can someone help, please?

  Hello

  For me, this looks like a defective screen. It might also be malfunction of the inverter FL.
  However, it seems that there must be a hardware failure. In this case, the only way is to contact Toshiba service for assistance.

  To be 100% sure that it of not a software problem, you can try to recover the operating system or / and try updating the graphics card driver.

• Generation of Blu - ray: no video (red, green, image etc.)

  Hey everybody,

  If this problem has already been addressed, could someone please point me in the right direction? I searched and have not found anything similar, but didn't know what to look for.

  My problem: every time I build a blu - ray project in again, I get the same result. the video will play (according to the progress on the Player bar), but the image is always a solid color, sometimes it's red, green, beige, black, apparently just at random, but always the same color throughout the video full.

  I tried so many different things at this point, I am at a loss to know how to proceed further. I tried this with at least three different projects, that have been created in the first. I tried both the dynamic link between first and still and export the video first and import in again later. I tried the transcodage.264 and MPEG2 (I'm not very well informed about the settings, so I use the default values). I tried to build the project in again as a blu - ray folder and ISO. I burned the disks and played just the digital files on my PC.

  The video still plays well until after it is exported from even (that is, it displays an overview very well in the exported video first of first plays well in players like VLC and fine video previews in yet). And I have no difficulty building still on DVD with the same video, editing and all that jazz.

  The only thing I haven't done is taken worth a try to reinstall again, that will be my next step if no one here has any suggestions. I'm running CS6 with all latest updates. I tested playback of blu - ray in PowerDVD and a PS3.

  As I mentioned above, I'm not very proficient in video. If I have omitted important details, let me know. Thanks in advance for any help!

  Matt

  Well, just for fun, I've updated my (Quadro 4000) video card driver and surprisingly, that solved the problem on my PC. Burned a disc to try on my PS3 at home to see if it works also. I'm not familiar with how works yet, but maybe he uses the video card when you build a project?

• Red screen flashing interminnietly

  Sometimes red flashes inremittedly times at random, it usually fixes around tons of use later. NOPE.

  Image:

  Hello @Tenno,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you have a problem with the display and wanted to help you!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use the links below to help you with this information:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, can you provide me with a little more information about the issue you have with the display?  The screen flashes red, only when playing games?  Or it will happen during any program?  Forward to your response.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Envy TouchSmart desktop: screen flashes on the screen of windows 7 (in blue) to black

  When I turn on my computer, sometimes the blue screen with 'Windows 7' on this subject. The wheel of death comes up and then the screen flashes blue to black. I'm in huge trouble because I back upwards (I know, I know) and the first half of my research project is about it. Help, please.

  Hi there @Dfash,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the black screen. I'll be happy to help you.

  Here are two documents that can help.

  Computer won't start (Windows 7, Vista, XP)

  Computer starts but the screen stays white (Windows, 10, 8)

  Please keep me informed of the progress of things. If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

  Thank you.

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• Tecra S1: Screen starts flashing and is now black

  Hello. I have a Toshiba Tecra S1. Its 4 years.

  Last night my screen suddenly started flashing and my computer froze. I had to reboot my computer and then the screen starts sometimes, but mostly it stays black. If splash screens, I have only gently shake the computer until the screen flashes again and the computer crashes.

  Otherwise, it seems that the computer works as it should do.

  Could you please tell my computer can be repaired or should I think about buying a new computer.

  Best regards

  Hello

  In my opinion there would be something wrong with the motherboard.
  Perhaps dysfunction of VGA chip maybe some covers may come into contact with the VGA chip and cause of could short-circuit.
  This could be an explanation why the screen flashes and the computer hangs after a shaking gently.

  But buddy note; Here are just a few suggestions and you should contact the ASP if you want to know what's wrong s and what causes this problem.

  Concerning

• the images show black with red and blue sections on importation

  Newly installed 5 Lightroom on new computer (HP ZBook with 4 k screen).  When the files are imported from SD card on the display main and previews images are mostly black with some red and blue areas.  I tried disabling autotone and indicators of clipping and tried disabling GPU and the changing screen resolution - nothing helped.  I can see histogram and use the sliders to change the picture a bit, but can "lead to normal. The same images of this SD card are fine in Lightroom on my old computer.

  What can I do to fix this?

  Thanks, Paul

  This looks like a bad monitor profile. You must re - calibrate your monitor. If you do not have a calibrator, go to the properties of your monitor (it looks like the right of windows) and remove any profile associated with the parser. That do Windows will take your monitor is sRGB. This should solve the immediate problem, but it is always recommended that you calibrate your monitor with hardware calibration.