TOSHIBA Libretto SD Card - gel after the installation of the SP3/Windows Update

Hello

Since the installation of SP3 via Windows Update on a new installation (Original Toshiba Recovery CD) my card reader SD freezes Windows after putting the card in the slot.

The card is OK and formatted.

Besides updating windows doesn´t work more.
I´ll to pass the message on the updates, and the installation stops.

The patch couldn t be installed because there is a problem with the computer.

I m of the Austria and I translate to English.
Hope you can read and understand it - perhaps someone has a solution.

Best regards

Ingo

Published by: ADMIN

Hello Ingo

Last days, we read more similar reports on the various problems after installing SP3. As far as I know that Toshiba has faced similar problems after SP2 release and updates were offered. The fact is that SP3 has a negative influence on the different drivers and Toshiba has designed tools and utilities.

For now, Toshiba has not any update and we need to see what will happen in the future. I always use SP2 and do not have similar problems on my laptop satellite.

Or you can live with it and wait for update or restore BONES on time earlier and remove SP3.
I see no solution at the moment.

Tags: Toshiba

Similar Questions

  • After the last Windows Update (04/27/11), my home group no longer works

    Original title: homegroup after Windows Update failure

    After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

    I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

    The resolution of the problems of the residential group has done several things, but that did not help.

    What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

  • Driver Realtek NIC missing after the previous Windows Update on window Home Server 2011

    During the last windows update, I lost the Realtek NIC driver on windows home server 2011. If you do not have the backup, is the only way rebuild machine or there is another way to install the driver software.

    Hello

    Since the problem is specific to the window Home Server 2011, I suggest that the validation of the query on the forum link mentioned here.

    http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

    They are a team of dedicated support, helping issues related to servers in the window of the House.

    Hope the information is useful.

  • After the last windows update cant now use Skype as it says that I don't have directx installed what I do! help please

    Hello, just do the automatic window was last updated and now Skype will see direct x, how can I sort cela cheers martin email me at * address email is removed from the privacy *

    Uninstall Skype and download/install the latest version after a reboot.

  • After the recent windows update August 16, 2012, my connection to Internet is not working...

    Hello

    I use a laptop HP Pavilion with Windows Vista. August 17, 2012, my connection Internet has stopped working. He was showing 'Local' only against the State of the connection, even if my cable internet and routers wireless work correctly. I have connected to the internet from another computer using Windows XP.

    After having tried many options to solve the problem of the internet for fews and realizing none of them solved my problem: (, I decided to restore the computer to the factory settings on August 19, 2012.) But to my surprise, system recommended to restore to an earlier date (before these recent automatic updates are made on August 16, 2012). I thought to try and to my surprise, my connection Internet started working :).  Which made me think that something that happens in the recent update that is causing my internet connection does not work.

    At the beginning I was in doubt, but now I'm fully convinced as next morning of day again my internet connection stopped working again. I checked Windows update history and realized again automatically updates performed on August 20, 2012. I restored my computer to the previous version before updates again and the Internet started working.

    Here's what I see in the history of the update for that day.

    Update of security suites for Microsoft Office 2007 (KB2596856)

    Cumulative security update for Internet Explorer 9 for Windows Vista Systems (KB2722913) based on x 64

    Update security for Windows Vista for x 64-based systems (KB2731847)

    Update security for Windows Vista for x 64-based systems (KB2712808)

    Update of security suites for Microsoft Office 2007 (KB2596615)

    Update security for Windows Vista for x 64-based systems (KB2705219)

    Windows x 64-August malicious software removal tool (KB890830) 2012

    Can anyone help answer more?

    -What day could cause this problem?

    -How can I just remove this one update which may cause a problem (I'd like to get the other automatic updates in the future, so don't want to disable the auto update)?

    The guys at Microsoft told me, problem is introduced by McAfee.  Here is the link for the solution to the problem.

    http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

    I didn't try it myself, as my internet problem is automatically solved in a few days. I think that my version of McAfee must have automatically been updated, which may have solved the problem.

  • Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

    original title: blue screen continues after the latest updates of Windows

    Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

    Linda,

    The link below has options to solve your problem of loop.

    http://support.Microsoft.com/kb/949358>

    04/25 / 1112:57: 43 pm

  • Touch-pad stopped working immediately after the automatic windows update

    I was using my computer last night and have downloaded an automatic update of windows, so I restarted my computer so she could install the updates and as soon as updates when installed my work key touchpad stopped. Toshiba Satellite A215-s7472. I plugged in a usb mouse and it works very well.

    Visit the Web from Toshiba site to download and install the latest driver for the hardware device to your system.  They should be your source for such things.
     
    For all this Satellite A215-S7472 to main download link:
     
    You did not specify a level of operating system/architecture - so you can the menu drop-down, select the categories appropriate here. ;-)

    --
    Martin Stanley
    MS - MVP
    --
    How to ask Questions the Smart way
    http://www.CatB.org/~ESR/FAQs/smart-questions.html
  • I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

    I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
    Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

    I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

    Any help will be appreciated. I really need help.
    Thank you.

    Well, try this:

    1. If the power is off.
    2. Start the laptop and keep press F8
    3. then select restore.

    And? :)

  • I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

    I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

    Hello

    Make sure you have the latest network adapter drivers fron toshiba

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    and if windows update is at the origin of the problem change how to get updates to uncover the problem update

    When you have found the issue, a right click on it then invited uac then hide

    read the information on the link below

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • Satellite 100-192: questions after the recent MS update...

    Satellite 100-192.

    After the recent MS update I had the problem with the Realtek sound card driver. I solved it by applying the hotfix provided MS.

    Now the problem is that the disk cleanup utility does not launch. Anyone any idea?

    I just found out that my disk cleanup utility would not work due to a free program called Photo Toolkit. Although it is a nice little program for quickly editing photos, apparently it causes such problems when it is loaded.

  • Can not start, after the logo window shows the screen empties.

    I tried safe mode. When pilots take care it stops a...\system32\drivers\mup.sys crashes then.

    Original title: after the logo window shows the screen turns off. I deleted the drivers and now I don't know how to reinstall if I can't see the windows or office. __

    Hi Hermmm,

    • Who were the drivers that you have deleted from your computer?
    • You have the Windows XP installation disk?

    Step 1

    You can try to boot the computer to the last good known Configuration and check if it helps to start the desktop. To boot to the desktop in Dungeon known, pressing F8 during restart last good Configuration. Once you see the startup option in the last good known Configuration and press ENTER. Check if you can access the desktop.

    You can also try to disconnect all external devices except the keyboard, mouse and monitor and check if you can boot to the desktop.

    Step 2

    If the steps above do not help, you can boot to the recovery console and try to disable the service or the device to the computer and check if it helps you to solve the problem. The links below for more information on how to boot to the recovery console and disable the service and the device in the access recovery console.

    How to install and use the Recovery Console in Windows XP
    http://support.Microsoft.com/kb/307654

    How to disable a Service or device that prevents Windows from starting
    http://support.Microsoft.com/kb/310602

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After the two latest updates (currently on 30.0) I get characters corrupt in the (awesome) address bar.

    After the two latest updates (currently on 30.0) I get characters corrupt in the (awesome) address bar. This seems to happen randomly according to the current URL. When the problem exists, I can't read anything in the URL bar. I have a screenshot of the problem.

    This problem may be caused by the extension of 1.0.6 RSS icon which displays in the list of system details.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

    The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

    Hello

    Try this first

    Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:
  • After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

    After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

    We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

    Can solve you?

    Sorry for my English.

    Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

  • Why attached used pps files opened after the latest Automatic update of the ie8?

    Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
    attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
    When I try to open files pps attached, this is what I get.
    a box with a red x will appear and this is the message;
    "this file has no program associated with it for performing this action.
    Create an association in the FOLDER OPTIONS Control Panel."
     
    Before the automatic update, this function worked fine.
    Also, the association for pps files is still there in the Folder Options Control Panel.
    and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
    .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
    .. just one more why people hate automatic updates or updates of any kind.
    like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
    So what's the cure for this annoying problem?
    E-mail address is removed from the privacy *.

    I have XP SP2 and PPS PPViewer 7 NOT VISTA
     
    That's what my watch key

    HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
     
    not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
     
    I also tried renaming it as shown below, and it will not let me NOW WHAT?
     
    where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
     
    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for