Toshiba NB200-10Z change HARD drive to SSD

Hello. I plan to buy Toshiba NB200-10Z netbook. I would like to ask if the next drive 'OCZ-OCZSSD2-1VTX60G 60 GB Vertex Series SATA II 2.5 SSD Drive' will fit this netbook?

Post edited by: Lee

Hello

The SSD must fit into the laptop with no problems, because it s the same size as a HDD normal (2.5).

The point is if SSD drive will work in NB200. Normally, an SSD should work on all SATA interfaces, so in your case, I would try an SSD.
After that, you can validate the experience with this player. I am interested in. :)

Good bye

Tags: Toshiba

Similar Questions

  • WANT to m6-w102dx x 360: HP ENVY m6-w102dx x 360 change hard drive to SSD

    Hello

    I recently bought ENVY m6-w102dx x 360 and thinking to replace my hard drive for an SSD.

    Please let me know the best SSD drive editing this model.

    Planning to buy samsung evo 250 GB. Is this compatible with this model?

    http://www.Amazon.com/Samsung-850-Evo-250-MZ-N5E250BW/DP/B00TGIVZTW

    http://www.Amazon.com/DP/B00OAJ412U/ref=twister_B00PRDMHLU?_encoding=UTF8&PSC=1

    That it would be much faster?

    If this isn't the case, please advice me on the interface that supports.

    Thank you.

    Hello

    To replace your HARD drive, you need the 2.5 ", 7mm SSD. The m2 is not.

    Kind regards.

  • SSD - change Hard Drive to SSD

    Hi - I have a MacBook Pro 15 "2011 end and need to know if this model can accept a SSD and the specification of what I should look for if so? Thank you all.

    you don't know.

    Use a SATA SSD in a form factor of 2.5 inches, the same as the drive that you delete. Put the new drive in an external enclosure, or use an adapter. Install Mac OS on it first, THEN do the surgery to separate questions of surgery installation problems. Don't pay extra for SATA III 6 GB, because your Mac uses SATA II 3 GB which is well fast enough for most cases. Use your current drive size (and whether that will continue to meet your needs) as a guide, then buy a bigger than that of the road. You won't run out of space and having to redo all this.

    This also allows you to use your old drive recovery partition to download and install on the new drive. You could also do a 8GB USB stick using DiskMaker X standalone installer. Such an installation program includes the necessary set of utilities as well.

  • Can I change hard drive with an SSD in Toshiba NB100?

    Can I change hard drive with an SSD in Toshiba NB100?
    The hard drive in this model is the same size as SSD 2.5 drive "?

    Hello

    As far as I know the laptop supports the disk HARD 2.5 SATA.
    I think you could use a SATA SSD drive. Usually some SSDS require the firmware update but this should be provided by the manufacturers of SSD drives.

  • Hard disk failed to keep windows 7 for the new hard drive or SSD

    Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

    I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

    I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.

    Specifications:

    Laptop: TOSHIBA Satellite A660

    OS: Windows 7 Home Premium

    (Let me know if you need more details)

    Thanks for any help.

    If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:

    https://NeoSmart.NET/wiki/Toshiba-Recovery-disk/#Create_disc_for_Windows_7

    After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

    You will need 4 blank DVDs.

  • Power cord for a Toshiba NB200-10Z bought in the United Kingdom EU?

    Hello

    I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?

    Thanks for any information.

    Best regards
    Boucicaut

    Hello

    I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.

    You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
    Alternative go to your favorite computer store. Such a cable, you must find there too.

  • How to make Toshiba USB 250 GB HARD drive read-only?

    Hello

    I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

    I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

    Moreover, all the other tips to protect the disc would be extremely welcome.

    I use a Dell with Windows 7 laptop.

    Thank you very much

    Dougal

    I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
    Did you check manuals? Is something like that provided with your HARD drive?

    Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

  • Toshiba NB200-10z - creator.lnk recovery disk is not available

    Hello, I have a problem with my Toshiba NB200-10z netbook, when I run creator of recovery disk Toshiba with that I get the window:

    The unit or the network connection to which the link refers to "creator.lnk recovery disk is not available.
    Make sure that the disk is properly inserted or the network resource is available and try again

    How can I solve this problem?

    You want to create the recovery disk or recovery image stored on USB flash media?

  • Toshiba 500 GB external HARD drive is no longer detected - after only 1 hour

    Hey,.

    I finally got my Toshiba 500 GB external hard drive delivered today. I had no problem setting up and to turn my laptop on, it immediately recognized and I started to transfer things for her.

    However, I accidentally stood on the USB cable to the HARD drive and disconnected. I plugged it in, but my computer did not recognize.

    Nothing I've tried has worked, always, the laptop does not recognize the hard drive.

    Please help, I've only had the one hour thing, and it already does not work! I really hope that I have not only lost £56...

    All advice is appreciated, thanks in advance.

    NEW: My father just tried plugging the HARD drive in the desktop PC is on the ground, and as soon as the USB when it is in the port, you stop the computer... causing him to lose a lot of important business email, he wrote. It starts the computer, the USB and you stop again... and this has happened 3 times until he gave up. What on Earth is wrong with this thing? I've never heard of a USB cable, stop a computer permanently, or a hard drive that does more after an hour of use...

    Post edited by: Sam_V631

    The USB port on the HARD drive may have been damaged and may be causing the PC detect a short power.

    You can try another USB cable? If it is not the cable, then the HARD drive should be sent to a Service Center for repair or replacement.

  • New NB550D clean system and TOSHIBA recovery on the HARD drive.

    Hello

    I was wondering, if I install a new clean Win 7 on my NB550D I keep TOSHIBA recovery on the HARD drive and when I need to use it.

    If so, how can I do?

    > I was wondering, if I install a new clean Win 7 on my NB550D I keep TOSHIBA recovery on the HARD drive and when I need to use it.
    You can keep it, but after installation of clean operating system, you will not be able to start the installation of recovery more. Now, when you press F8, you repair my computer option. After the installation of clean operating system this option will disappear.

    What you need to do is to create DVDs of recovery or recovery USB key before you install own OS. Be careful about this.

    Document reading s user manuals. You will find exact description, how it works.

  • Toshiba NB200-10Z problem with SSD

    Hello friends,

    I have following question,

    I have a Toshiba NB - 200 10z since 2010 and was very pleased with its durability and strength, for the use I've done (the simple navigation, document processing, films etc.)

    Recently, in order to improve its performance I replaced the casting on (5400 RPM) hard drive with a new drive Kingston SSD or 128 GB.

    After that, and with no other hardware changes, the netbook seems to be 100 times slower than before :-(

    Sounds familiar to anyone? What could be the cause for it?

    Thank you in advance!

    Huh... I think you're the first person who reports on the SSD upgrade on this old model of netbook. I have more recent NB520 and always use it with the original HARD drive but use SSD on other machine Satellite.

    What I m missing in your assignment is some info on preinstalled OS. Have you installed recovery original image (OS original version you got with your machine) or your own version of the OS?

    By default the BIOS settings too.

  • After changing hard drives on my Toshiba laptop, won't activate Windows Vista.

    I have two laptops Toshiba Satellite, I bought new. Due to hardware failures, I changed the hard drive of a laptop in the other. Everything works fine, but now the Panel / System states that I have two days until automatic activation. He also said whenever I try the option activate the invalid product key! The Microsoft product Authenticity sticker is more readable on the laptop where the hard drive was born. In question operating system is Vista Home Premium 64-bit. Help, please!

    original title: activation problem?

    You can buy a full license of Windows 7 and install it, but make sure that your computer meets the Windows 7 system requirements

    You need a qualification license Windows to upgrade; you don't when you moved the hard drive.

    You don't say what the problem is with the hard drive of the laptop you are trying to install this hard drive Vista preinstalled from the other laptop in.

    If you bought them at the same time, two thay have Vista Home Premium on them?

    Why not use this laptop you try to go there and his original hard drive, if still OK.

    If its hard drive is not OK > you can then put this "non-genuine" hard drive in it > reinstall the correct version of Vista that is pre-installed on the notebook computer > then purchase an upgrade to Windows 7 If you wanted to.

    One of the posters put this Information in place in the Forums:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/FAQ-common-Windows-7-installation-questions/6719ae72-7187-45CD-80f7-55e66f3ec686

    And most importantly make sure that Toshiba has Windows 7 drivers available for your model laptop activate Windows 7 works correctly.

    See you soon.

  • Laptop HP Pavilion dv6-6161sa changed hard drive SSD

    Hi I have the

    HP Pavilion dv6-6161sa notebook PC

    and I installed an SSD in the optical drive and copied all the recovery tools hp and sytem on the new hard drive and a cover on it, then I would have a new installation, but now some software intel have stopped working or sayinbg is not compatible with my system more

    Intel my wifi technology has stopped working and the custom install as it says my system is not compatible, but I had it on my old hard drive that I wiped and also custom 3000 drivers graphics intel install for the same reason that makes no sense as I have intel widi preinstalled

    I solved the problem just do a factory reset and my laptop's graphics card intel low power and amd for high performance im do not know what caused the problem

  • Qosmio F750-129 - change HARD drive

    Hi all

    For my QOSMIO F750-129, currenlty it works with native hard drive Hitachi HTS547575A9E384 (5400 RTM)

    I would change this hard drive for a faster:

    Seagate hybrid SSD Momentus XT ST750LX003 2,5 "SATA III 750GO (7200 RPM)
    or
    Hybrid of Seagate 1 TB portable computer SSHD ST1000LM014 (5400 RPM)

    Is it possible for you (power, temperature, SATA interface...)?

    Thanks a lot for your help.

    To increase the performance of the laptop HARD drive change is recommended. I recommend exchanging it with SSD. You will see the difference. Computer laptop will start and runs much faster than before.

    Toshiba also offers SSD so if you need some info visit http://storage.toshiba.eu/cms/en/index.html

  • Hard drive to SSD/Fusion - a hard drive disk drive SSD/Fusion

    Hello, I own a Mac Mini (end 2012) that to a 1 TB hard drive and 4 GB of RAM, under El Capitan. As you can understand, it begins to slow down... I wanted to know if it was possible to change the HDD pour a Fusion drive or an SSD (may Apple stores do?) or whether it is preferable to add RAM or both? Pour-ins information my computer mainly for watching movies (also by internet TV), text processing, spreadsheets make... Very little treatment of videos/pictures but I wish I could do easily if I need it. Thanks in advance!

    Hi, I got a Mac Mini (end 2012) with a tough, 1 Tb, 4 GB of RAM, running El Capitan and it becomes slow... I wanted to know if it is possible to spend my Hard Drive disk Fusion or a SSD (and if the stores Apple could change?), or if the best thing to do would be to add more RAM or both HD editing and adding RAM? I use my Mac mainly to watch movies (and TV on the Internet), using Word/Excel... I don't use a lot of software like PhotoShop, etc, but I would use it without being stopped after every single when necessary change. Thanks in advance!

    Thinking about getting more memory would be better 4 GB became slow for me with mtn lion upgrade helped a lot

Maybe you are looking for