Toshiba NB200-10z - creator.lnk recovery disk is not available
Hello, I have a problem with my Toshiba NB200-10z netbook, when I run creator of recovery disk Toshiba with that I get the window:
The unit or the network connection to which the link refers to "creator.lnk recovery disk is not available.
Make sure that the disk is properly inserted or the network resource is available and try again
How can I solve this problem?
You want to create the recovery disk or recovery image stored on USB flash media?
I just bought a NB200 and trying to make recovery disks. When I load the Creator program of recovery disk, under disk selection, it shows no file or options for CD/DVD and the button create in the lower part is grayed out. Can anyone suggest what I am doing wrong? I'm a novice all help would be really appreciated. Thank you
What DVD player you attached?
You will need a USB2 external DVD player.
I lost my disc of recovery for Toshiba Satellite Pro L10.
Service in Poland say my only: Toshiba do not have this disc now.
am I to do now?
I need to reinstall my system.
Model number PSL15E-00x009PL, serial number 55016672W
Sorry, my English is bad.
It s very strange because this device is not very old, and as far as I know you can order all recover cd. Toshiba should always have a copy of the CD or DVD. I can t believe that it s is not possible.
I would recommend asking EPA again or to call other ASP in Poland.
The second possibility is to install the OS from the Microsoft CD-ROM, and then install the drivers set and tools of Toshiba.
Such Toshiba things you will find on the page of the Toshiba driver.
Hello. I plan to buy Toshiba NB200-10Z netbook. I would like to ask if the next drive 'OCZ-OCZSSD2-1VTX60G 60 GB Vertex Series SATA II 2.5 SSD Drive' will fit this netbook?
Post edited by: Lee
The SSD must fit into the laptop with no problems, because it s the same size as a HDD normal (2.5).
The point is if SSD drive will work in NB200. Normally, an SSD should work on all SATA interfaces, so in your case, I would try an SSD.
After that, you can validate the experience with this player. I am interested in. :)
I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?
Thanks for any information.
I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.
You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
Alternative go to your favorite computer store. Such a cable, you must find there too.
Back to school for 4 children with laptops is a pain, he seems to be constantly before wipe them and their establishment again.
Any ideas why the Vista recovery disks do not display TOSHIBA HARD drive recovery option?
I made a USB key and copied all the files from a backup of the Recvery drive to it. The USB displays the TOSHIBA HDD Recovery option but calls for the disks and will not run the recovery of the USB itself. It's annoying, but at least I can still use it to recover the machine.
I would like to be
the problem with discs
get the USB key to retrieve by using its own files instead of asking for the disks. Vista was not created with the option to recover from USB, so maybe I can't.
HARD drive recovery option appears not in the advanced boot menu if something has been changed or modified on the HARD disk and the flag was removed.
For example, this may be the case if the partition has been changed, modified or if HARD drive recovery files or folder has been changed, moved, or deleted.
In case you want to recover the computer laptop back to factory settings, you must use the recovery disk
XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.
Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.
I'm trying to do a clean install on my laptop, but the recovery disk is not working.
The files transferred to the laptop, but once done, I get an error message that says: "the system is not fully installed. Please run Setup again."
Does anyone have suggestions as to how to fix it?
It took me four days to get to this point and make me very frustrated.
What is the installation using another CD; That is to say the Microsoft Windows XP disk?
Have you tried that?
In my opinion, this would help to pinpoint the problem
The error message can be linked to different issues; I mean the HARD drive or a single partition problem could also be possible.
Try to format the drive HARD whole again. Delete all partitions from the HARD drive and check if you can proceed with the installation.
But if you will not be able to install the OS by using the recovery disk and other disks then a question must relate to a part of the material. (possibly HDD)
Two weeks ago, crashed my HP Pavilion Elite HPE - 480 t hard drive model. It is a 1.5 TB came with the PC. I bought a WD 1 TB hard drive and installed. When I used my recovery discs, I received a message, "the system recovery disks do not support this computer. You are not able to restore this system with these discs. "Because I had never used these recovery discs, I assumed I had their damn so I bought authentic system recovery disks from HP. Yesterday them - even received training as before. I called HP tech support and I was told that those recovery disk works with a hard drive that is identical with the original hard drive. Located between the two hard drives that the original HD had a 3 GB/s, and the new is 6 Gbps. Is this correct? They "graciously" offered replacing my new hard drive with a hard drive that works for only $180. Seems a little steep, but I am confused. Is system of technical recovery disks? I would like another opinion. If buying a new motherboard out me of this? If someone knows a resolution to my situation, I would be very grateful. Help!
In fact, you have more options that will avoid spending more in $$. The first thing I would try is the utility that provides HP. It is used for when the set of recovery disks does not work with a new hard drive. Follow the instructions of this web document.
View your results. If the results are negative, we can install the operating system on your new hard drive with another method.
What is the WD SATA drive model you purchased?
It started with a closing inproper down, now, everything went recovery disk does not start even the computer
You may need to change the boot order in the BIOS.
How to configure the BIOS to boot from CD
Advice and warnings &
Incorrect settings, the BIOS can prevent your computer from working properly. Do not change the BIOS settings if you are sure of what you are doing.
Configure your BIOS to boot from CD
Unfortunately there is not a set of measures to do this because the BIOS settings vary from one computer to the other. You will need to check your manual or documentation of the computer motherboard for accurate measurements, you need to complete to allow your computer to boot from CD.
What are the system recovery options in Windows Vista?
I have a Lenovo Y410 7757 - of course, Vista has been preloaded... but I Leenovoo system recovery disc. Although the HARD drive has failed... I replaced it - but the dvd player does NOT have the Lenovo recovery disk (drive just whirs/stops...error "PXE - E61 MOF Media test failure, check cable;) Out wide com PXE operating system not found); and I can't mount the HARD drive clone or use the media to start (on my free agent).
Works to the DVD... it read and ran my XP Pro upgrade disc (my office is XP) - works of System Mechanic drive (although it is bed/open-then "Unloaded QDMA")... but NOT the Lenovo recovery disk! Not the NOVO button... NOTHING! I even tried to partition the new disk - for a dual-boot - market with XP (because it worked). Now, I have installed XP Pro upgrade and work – but I can't use the recovery disc, or EVEN mount the clone...! I hope I'm missing obvious detail, little... in the meantime, I get out my hair in frusration near pullng balBALD! I have been without this laptop for over 2 weeks! Help! (and thanks in advance for all advice!)
If you have problems with the process of recovery of manufacturers, contact the manufacturer
It's their recovery process not microsofts
read this too
I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick
Unfortunately, I don't have any experience in troubleshooting these special software installations.
We should expect to download and install.
If they are not, I have no tricks up my sleeve for you to try.
I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.
See you soon,.
I have a HP G62 339WM Notebook PC with Windows 7 Home Premium 64-bit. I bought by mail, system recovery discs and they do not work. And my HP Support Assistant displays "an error has occurred" and end not updates.
The Troubleshooting Guide for the recovery started from CD or DVD says: "update the firmware of the drive. This is especially true if the disks were received from HP customer service by mail. The firmware of a DVD player (the pilot) isn't able to recognize the support of recovery disk which was created using a newer DVD manufacturing process. Download and install updates on the firmware of the DVD available at HP that corresponds to the type of DVD drive on your computer. »
How do I update the firmware of the player when my HP Support Assistant would conduct no updates. I downloaded the latest Hp Support Assistant and he always always says "an error has occurred."
My laptop model has no updates from HP.
As new as your laptop is I doubt you need a firmware update for the CD/DVD drive.
Could you give a little more detail also the recovery disks do not work. For example you get an error, or is the laptop just not boot from them and goes directly into Windows?
Have you tried to put the first disc in the drive, shut down the laptop, wait a minute or two and turn on the laptop, start typing the ESCAPE key to get the menu. Should be an option of F9 to select the boot device. Select the CD/DVD drive and press ENTER.
I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?
Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.
I use Photoshop cc 2015. When I go to render the lightig effects, I get a message saying 'cannot apply lighting effects workspace because the disk is not available. I'm running on OS 10.11.3 system
Please take a look at the following link: Optimize performance Adobe Photoshop CC and try the steps.
Once done, see if you still get the same error.
Maybe you are looking for
Hello Two weeks ago, I ordered a set of recovery disc for an HP Pavilion ms215uk all in a desktop pc. I paid £31.06 for drives that turn up. (7 days from order to receipt) - fair enough. However - they did not work. Disc 1 is OK, but on the insertion
Hello I have a HP Pavilion dv7-1005eg and today I wanted to install a new operating system (Windows7). After installation, the system unbootable. I tried to boot from a DVD or a Flash drive, but it still does not work. What I see is the HP invent Log
I went to buy a movie through my credit card, however its been 4 days and nothing came through. All its says on my bank statement is $ 1. I won't buy it again just in case it eventually crosses, what should I do?
I have a HP Laserjet the MFP Pro M225dw, less than a year. After having turned off for two months, he's stuck on the screen "Initializ ing" the HP logo. Can somone advise how to start?
Hello!I would like to know how to post messages to ActiveMQ OSB, what steps should I take? Is it necessary to create a JMS system Module?Thank you in advance.Best regardsSandy.