Toshiba NB200 unable to navigate in internet

Hey everybody,

I have a Toshiba NB200. I am able to connect to a network (tested on home router as well as prepaid 3G USB modem) and I can ping websites in the BACK. I can not navigate. I tried IE and Firefox, and both have the same results. I tested with the firewall off the coast and still no luck.

Any suggestions?

Thanks in advance!

Hi mate

Have you checked the two fittings; LAN and WLan?
If this isn't it!

If you can ping to the router and if it is possible then you should check if the router is configured correctly I mean that all the data of the ISP (internet service provider) must be checked also.

Tags: Toshiba

Similar Questions

  • Toshiba NB200 - startup problem (Windows XP) - unable to access safe mode

    Hello

    I have a laptop Toshiba NB200 with Windows XP. When I turned on, it would not start past the first screen and I couldn't make F8 safe mode.
    The only thing I can do is go into the BIOS Setup, and that's all (press F12).

    The BIOS recognizes the hard drive. Then, I created a USB stick to boot from and that made me a C: quick MSDOS having first changed the BIOS to read the USB first and also updated the BIOS (Phoenix v1.6).

    I'm not clear as to what I do then in the folder c: prompt will not let me run windows and shows just the files on the USB key.
    Should I copy the files from windows to the USB port? In addition, how will I know if the hard drive has failed and that it is unrecoverable (I hope not)?

    Any guidance welcome!
    Thank you

    Hello

    Eventually, there is no Windows OS on the HARD drive and therefore you can not start safe mode or the OS.
    You have a recovery disk or you did backup the image of Toshiba on the USB flash key?

    If this isn't the case, then you need to reinstall the OS of the own Windows XP CD.
    You could build a clean Windows XP USB flash stick that can reinstall the OS.
    I think that this should be possible since you started the laptop backpack.

    Here's a nice instruction how to do this:
    http://wiki.EeeUser.com/windowsxpusb

    Good luck

  • Unable to charge the Toshiba NB200 at all

    Hello

    I recently bought a Toshiba NB200 and after that the battery has finally failed, I tried to load but to no avail. When I plug in the charger, the sheet of light at the bottom with all other types of lights (HDD light, seeing the battery etc) shined green while the battery light was orange all the time even if I left it for a long time. Every time I tried to turn on the computer, while the "charge", only, I could get as far as the windows start page when it turns off by itself because of the low power.

    What problem I have because it seems weird that the plug led is green while the battery light is still orange after a long period of time.

    Is there anyway that I can fix this problem or any other method if this problem cannot be solved?

    (Well a point to note is I bought my laptop in Thailand and it loads fine, but when I got the laptop, I can not load but the thing is that I brought my laptop previously bough Thailand to Singapore and it worked fine, so I don't think not its anythign wrong with the laptop being from different countries and all)

    Thanks in advance for any help. : D

    I think that the problem lies in your power adapter, which has been purchased with your laptop in Thailand. Asia and Europe use the same standard of electricity (I think?) but it's different in America. If you're lucky your battery may still be usable. You have to buy an adapter designed for America.

  • GPS Toshiba NB200 problems

    I have the same problems as this user here:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=173254𪓆

    Only the computer is different, my comp. plug:

    Date 2009-11-22 20:11:26

    [Information on PC]
    Model name TOSHIBA NB200
    Part number PLL25E-00Q00RG3
    Serial number 89338668K
    Version of the OS Microsoft Windows XP Home Edition 5.1.2600 Service Pack 3
    Version of the BIOS V1.20
    Processor Intel (r) CPU Atom N270 @ 1.60 GHz
    RAM 1024MB of physical memory
    Disk capacity hard 160,039,272,960 [bytes] 149.048 [GB]
    Capacity of the hard drive space free 136,304,427,008 [bytes] 126.943 [GB]
    Version Mobile Intel (r) 945 Express Chipset Family video = 6.14.10.4926
    Screen resolution 1024 x 600 Pixels
    Color quality, true color (32 bit)
    Audio version of Realtek High Definition Audio = 5.10.0.5809
    Network Atheros AR9285 Wireless Network Adapter = 7.7.0.233 version = 00:23:08:B2:ED:02 MAC address
    Version of Realtek RTL8102E/RTL8103E Family PCI - E Fast Ethernet NIC = 5.714.122.2009 00:26:22:2F:EF:E7 = MAC address
    F3507g Mobile Broadband Modem Modem Toshiba version = 4.50.2.0
    IDE Device 1 Hitachi HTS545016B9A300
    Interface IDE 2 no
    Interface IDE 3 no
    Interface IDE 4 no
    Interface IDE 5 no
    Interface IDE 6 no
    Internet Explorer 8.0.6001.18702

    EC/KBC Version ' to? Â? »
    PS-MICOM Version ' to? Â? »

    [Information QFE]
    Windows Update "KB898461.
    Windows Update «KB915800 v4»
    Windows Update "KB923561.
    Windows Update "KB936782_WMP10".
    Windows Update "KB938127-v2-IE7.
    Windows Update "KB938464.
    Windows Update "KB941569.
    Windows Update "KB946648.
    Windows Update "KB950762.
    Windows Update "KB950974.
    Windows Update "KB951066.
    Windows Update "KB951376.
    Windows Update "KB951376-v2".
    Windows Update "KB951618-v2".
    Windows Update "KB951698.
    Windows Update "KB951748.
    Windows Update "KB951978.
    Windows Update "KB952004.
    Windows Update "KB952069_WM9".
    Windows Update "KB952287.
    Windows Update "KB952954.
    Windows Update "KB953155.
    Windows Update "KB953955".
    Windows Update "KB954155_WM9".
    Windows Update "KB954211.
    Windows Update "KB954459.
    Update of Windows 'KB954550-v5.
    Windows Update "KB954600.
    Windows Update "KB955069.
    Windows Update "KB955839.
    Windows Update "KB956391.
    Windows Update 'KB956572 '.
    Windows Update "KB956744.
    Windows Update "KB956802.
    Windows Update "KB956803.
    Windows Update "KB956841.
    Windows Update "KB956844.
    Windows Update "KB957097.
    Windows Update "KB958215.
    Windows Update "KB958644.
    Windows Update "KB958687.
    Windows Update "KB958869.
    Windows Update "KB959426.
    Windows Update "KB960225.
    Windows Update "KB960714.
    Windows Update "KB960803.
    Windows Update "KB960859.
    Windows Update "KB961118.
    Windows Update "KB961371-v2".
    Windows Update "KB961501.
    Windows Update "KB967715.
    Windows Update "KB968389.
    Windows Update "KB968816_WM9".
    Windows Update "KB969059.
    Windows Update "KB969947.
    Windows Update "KB970238.
    Windows Update "KB970653-v3.
    Windows Update "KB971486.
    Windows Update "KB971557.
    Windows Update "KB971633.
    Windows Update "KB971657.
    Windows Update "KB971961.
    Windows Update "KB971961 IE8.
    Windows Update "KB973354.
    Windows Update "KB973507.
    Windows Update "KB973525.
    Windows Update "KB973540_WM9".
    Windows Update "KB973815.
    Windows Update "KB973869.
    Windows Update "KB974112.
    Update of Windows 'IE7-KB974455.
    Windows Update "KB974455 IE8.
    Windows Update "KB974571.
    Windows Update "KB975025.
    Windows Update "KB975364 IE8.
    Windows Update "KB975467.
    Windows Update "IE8-KB976749.
    Windows Update 'Q147222 '.

    My ericsson F3507g GPS can't find any satellites... I tried everything (land bridge, Garmin Nav & Go,...) as user in other post, but it still does not work...

    Any ideas?

    BTW: I thought about GPS antenna malfunction...?

    Can you confirm that you are able to get NMEA data flowing? And that you get all the data by satellite?

    Also, it would be intresting to know if you can get out the signal 3G max indicator? That is, are you able to get 5 bars indicating maximum intensity of the 3G signal? To achieve this, you might need to move a little, preferably outdoors and also near the station a basis as possible. If you get 5 bars of GPRS or EDGE (2 G GSM) cover is not interesting, only UMTS or HSPA (3G) is interesting.

  • Unable to connect to Internet in Firefox 33.0

    I just installed the FF33.0 update and I am unable to browse the Internet.

    I'll have to use a different browser on the same laptop to access this site.

    I have Windows installed on a computer 8.1 laptop i7. I connect via WiFi using my router broadband. The connection is good (checked and double checked). Can't even access my router through FF33.0 GUI.

    I checked the Firefox site and downloaded FF33.0 from there. Went through the process (update was chosen) and the same problem occurred.

    Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

    Difficulty of problems connecting to websites after Firefox update

  • Firefox is unable to access the internet

    Hello

    Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

    Best regards
    Joel Hedestig

    You can try using the beta version of firefox mobile?

    https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

  • Toshiba NB200-10Z change HARD drive to SSD

    Hello. I plan to buy Toshiba NB200-10Z netbook. I would like to ask if the next drive 'OCZ-OCZSSD2-1VTX60G 60 GB Vertex Series SATA II 2.5 SSD Drive' will fit this netbook?

    Post edited by: Lee

    Hello

    The SSD must fit into the laptop with no problems, because it s the same size as a HDD normal (2.5).

    The point is if SSD drive will work in NB200. Normally, an SSD should work on all SATA interfaces, so in your case, I would try an SSD.
    After that, you can validate the experience with this player. I am interested in. :)

    Good bye

  • Toshiba NB200 Touchpad not smooth?

    I bought a Toshiba NB200-10Z this week and I am satisfied with my purchase, very elegant. The only thing is that if my fingers are dry the touchpad feels a little rough smoothly, by sliding your finger over it. But if my fingers were a little moisture on its fine and smooth to use. Everyone is faced with this problem? I don't think it's a problem with mine individually I think it's the texture of the touchpad.

    Thank you
    Ben.

    Hello

    I never noticed this issue with touchpad surfaces.
    If you are talking about the touchpad feature then I would recommend checking the touchpad settings in Control Panel-> mouse
    Here, you can edit and assign different options that could help you make the most sensitive touchpad

    See you soon

  • Power cord for a Toshiba NB200-10Z bought in the United Kingdom EU?

    Hello

    I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?

    Thanks for any information.

    Best regards
    Boucicaut

    Hello

    I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.

    You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
    Alternative go to your favorite computer store. Such a cable, you must find there too.

  • Toshiba NB200 PLL25A - 00K 002 Netbook (3G modem)

    Hi all

    Firstly, apologies if this information is located in a place, I searched on Google & the Toshiba site with no luck.

    My question is, this modem is in the Toshiba NB200 PLL25A - 00K 002 (3G model) Netbook?

    Specifically what I want to know is if the modem supports the frequencies 3G 850 MHz or 900 MHz.

    In Australia we use that traditional 2100 MHz 3 G in major cities, outside these region there is only Telstra 850 MHz or Optus frequencies of 900 MHz 3 G. This is why I would like to know if it supports either.

    Thank you for your time.

    F3507g being not not 100% sure that it's the F3507g which was delivered in your model, but I believe, is in the European NB200 at least.

    http://www.Ericsson.com/solutions/mobile_broadband_modules/docs/mobile_broadband_module_datasheet_print.PDF

    It is why for WCDMA, which is 3G 850 MHz is supported but not 900 MHz.

  • Toshiba NB200 monitor resolution vs photo editing software

    Hello

    I think buying a Toshiba NB200. The maximum screen resolution is 1024 x 600. I need a photograph and use Photoshop CS4 or Lightroom 2.5, minimum resolution of 1024 x 800. If I use this program in Toshiba NB200 it will Tween and calculating pixel (re-), right? There is a solution or what photo software do you recommend to use with Toshiba NB200?

    Best regards

    Vasco Neves of the Portugal

    Hello

    I m not a photographer, but perhaps you can use Photoshop on an external monitor where you can choose a higher screen resolution.
    Check this box!

    An alternative, you can use GIMP. AFAIK there is no minimum screen resolution.

  • "Invalid serial number" when you install utilities Toshiba NB200-h-13

    This model (h-13) is the student edition sponsored by the Government, used by thousands of Greek students and is not in the support downloads.

    I made a new partition and installed XP Pro SP3, in addition to the standard XP Home. I downloaded all the drivers for the model printed on the label number (PLL25E-00401WMG, which I assume is NB200-122 in the Driver Downloads).

    Most of the important Toshiba Utilities (value of hardware setup, Hotkey, added the logical device) terminate with the error "bad serial number.

    As the Toshiba Utilities work fine in the standard installation (old)

    1. is there a way to bypass the check for the installation of utilities Toshiba serial number?

    2 are there downloads Toshiba NB200-h-13?

    I did some readings from my previous post. It seems that in the 2nd installation of XP the Toshiba utility cannot read the DMI information stored in EEPROM memory, containing the serial number and model of the device. This is demonstrated by the fact that the Diagnostics Toshiba PC utility reports "Unknown" for the standard model, etc.

    As a result, a third question emerges, which is absent from the new installation of XP that allows to read the DMI Info? I guess I should investigate all the services that are running in the original installation of XP, but my bet is that utilities that install these services are not accessible to the public.

    The same utilities install perfectly under Windows 7 (Yes, I did another partition and it installed Windows 7). This means that Win7 has in DMI information tools, or Toshiba 7 installers do not check for her.

    Always in the hope of some clues to the community.

  • A few questions from a new owner Toshiba NB200

    Hello
    before 3 days I have buyed a Toshiba NB200 h-13 with Windows XP Home Edition. I want to upgrade to Windows 7 and I have a few questions.

    1) Will Windows 7 run good with Atom N270 1.6 Ghz 1 GB ram and Intel GMA 950 or must I go to 2 GB of ram;

    (2) can I save HARD drive recovery.

    Thanks for your help

    I've been running Windows 7 on my NB205 since the RC, yes it works very well and the drivers are available. I would upgrade to 2 GB of RAM...

    During installation, do not remove the recovery Partition and allows you to return...

    Jeff

  • Toshiba NB200-10z - creator.lnk recovery disk is not available

    Hello, I have a problem with my Toshiba NB200-10z netbook, when I run creator of recovery disk Toshiba with that I get the window:

    The unit or the network connection to which the link refers to "creator.lnk recovery disk is not available.
    Make sure that the disk is properly inserted or the network resource is available and try again

    How can I solve this problem?

    You want to create the recovery disk or recovery image stored on USB flash media?

  • I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

    I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

    Hi Dee,

    Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

    Good luck!

    Kosh

Maybe you are looking for

  • HDX18-1020US Blu - Ray on Vista 32-bit

    I have a new HDX18-1020US that came with Vista 64 - Bit and Blu - Ray.  I decided to convert 32-bit Vista (some software I need does not work on 64-bit) and have completed the conversion (enough patches and downloads from pilot to choke a horse).  Wh

  • Equium U400-145 full stop by an accumulation of static electricity

    I recently bought an Equium U400-145, really happy with it except... Yesterday, when I tried to turn it on, absolutely nothing happened - no light, no sound, nothing. I checked the plug, battery etc but nothing. I took it directly to the store and th

  • NHL 2004 Script problems

    Hello I have problems with this classic game on Windows Vista. Long explanation: I just installed this game according to remember how it was a few years ago. Looks like it uses, for some reason, the HTML and JScripts files create menu interfaces. Whe

  • VPN between Cisco and Check Point problem

    Guys, I have problems to establish a vpn site-to-site between a Cisco 3660 e router tunnel a firewall checkpoint NG AI R55. In the SiteA is an environment with a Cisco 3660 router using the following configurations: crypto ISAKMP policy 1 md5 hash pr

  • Preconfigure the client VPN Cisco 5.0 for 2000/XP/Vista

    I tried to configure the Cisco VPN client to load into a predefined area but also accept my .pcf files. I tried the old oem.ini file and even the vpnclient.ini. I don't find any documentation about this version and I was wondering if somebody already