Toshiba NB220-12W - problem with HARD drive - need to install the OS

My apologies if this is posted in the wrong section.

I have a 12W NB22, which I believe is more made. I tried to install Windows 10 that seemed to download without any problem.

However after turn off and turn on again, I was faced with a black screen and a message saying: an operating system not found.

Assuming that the hard drive is damaged it is simply

b replace the hard drive with a new and
(b) install a new operating system. ?

Any help would be welcome

I want to buy it. Is this useful?

Tags: Toshiba

Similar Questions

  • Problem with hard drive 3 TB and the need to delete the system partition reserved

    I am running Windows 7, 64-bit version.  have another hard disk of 500 GB and I bought a 3 TB hard drive and installed windows 7 on it (3 TB) fine.  But to finish install and found 3 TB hard drive showed only 2 TB of usable disk space.  does a job at home and found that before 2011, the bios of the motherboard can only support HD up to 2 TB, and in order to use all 3 to, I need to convert to GPT disk.  To do this, I need to remove the volume, but since I installed windows 7 more early, he created a score 'system reserved', I can't delete or edit, or format.  All boards to complete this (converted to GPT disk) so I can use all 3 TB of HD?   Now, I re installed windows 7 on my other drive.

    Any advice on how to convert to GPT disk without deleting the system reserved partition?

    Thank you all... Finally figure it out.  Just in case where any who need it going forward... and

    That's what I did

    Step 1.  start by using the windows installation disc 7, press SHIFT + F10 when the language pop up page, use the diskpart... command to remove the system reserved partition. and turn off the computer.

    Step 2.  Open the computer case and unplug the 3 TB hd of the motherboard by unplug the SATA her cable.

    Step 3.  Re-install windows 7, turn off the computer when done

    Step 4.  re - connect the 3 TB - DD and closed the case and power on the computer

    Step 5.  Disk management can use GPT disk.

    A lot of work, but finally did.

  • HP Clubhouse 15-p002 - problem with HARD drive replacement

    Hello, I want to replace the hard drive of a laptop computer
    on the old hard drive, I got Widnows 8.1 (the hard drive is destroyed)
    on the new is windows 7 (my hard drive of girlfriend)
    When I put the hard drive with windows 7 I see a message that it could not find boot
    but see hard drive
    I want to use windows 7 No 8.1

    Thank you and best regards

    Hello:

    In order to run W7 on your laptop, you must change both the BIOS settings.

    Please see the info at the link below... Windows 7 is not compatible with Secure Boot enabled.

    http://support.HP.com/us-en/document/c03736054

  • Hard drive partition and install the new operating system

    HY,

    If I partition my hard drive and I install a new OS (E.g. Ubuntu 14.04) my warranty ends?

    Thank you

    SA

    Hello

    No, it will not void the warranty but HP only supports the problems with the original operating system and prove the operation of the equipment of the original OS.

    Do the recovery disks and keep them safe before so that you could go back to factory settings if there is no problem of partitioning.

    Recovery partition usually works after partitioning, depends on your luck, but you could make the 'Active' Partition in disk management and try for recovery if it works or not.

    Thank you

  • What HARD drive can I install the Satellite Pro 2100?

    I installed a second hand Toshiba 40 GB HDD in my Pro 2100, but he fails to recognize in the BIOS. Any ideas?

    Yes, I have an idea ;)
    Have you checked if the HARD disk is not corrupted?
    I think it's a first step to find out what's wrong.

    If you are sure that the drive is 100% damage not so in my opinion him BIOS is unable to manage the size of the HARD drive. It s just too big size.
    The BIOS supports multiple disk sizes but if HARD drive it too big the BIOS may not be able to recognize the HARD drive.

  • Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

    Nice day
    Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

    http://img684.imageshack.us/img684/8434/smartm.jpg

    Hi Konyga,

    If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

    Is your laptop still under warranty?
    If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  • Problems with hard drive on my satellite C660

    Hi my name is Lisa and I'm new to the forum, I hope that someone can help you. When I turn on my Toshiba Satellite C660 I get a message saying cannot load files with this information...

    File Boot\BCD

    Status-oxcoooooof

    Info - an error has occurred trying to read the boot configuration data of you.

    When he continues to try to load the next message goes something being changed and said something on the hard drive or the CD-ROM drive I think it was the CD-ROM drive even when...

    I'm going to be able to solve this problem or am I likely to replace the hard drive or something...

    Thanks in advance for any help/support and advice xx xx Lisa

    Did you create the recovery disk?
    If yes try to start and check whether the HARD disk access is possible.

    Before you try this BIOS setting defaults.

  • UCS C22 M3 software RAID LSI problem with hard drive

    Hello

    I post here because I searched many hours for a stupid problem.

    I have a Cisco UCS C22 M3 with soft RAID LSI MagicRAID.
    I have two hard disk of 1 TB.
    I create a RAID array with the type 1 (mirror).

    When I run the installation of VMware ESXi 5.1 U1 I see the RAID array, but the two discs.
    I think that it is a driver problem.
    So, I install special with an iso VMware in the VMware Web site for Cisco server.
    I have test with ESXi 5.0 and 5.1, and 5.1 U1 but it's the same problem.

    I try to remove the RAID array and to install esx on disc one monkey. Installation works well, but in the boot menu, I can't boot from a hard disk. I don't know why I search with UEFI and she is disabled.

    I test with windows 2012, and 2008R2 to check if its working but in install I don't see also hard drive or the RAID array.
    I go to Cisco and download the driver of the 2G for VMware Linux and Windows.
    I try inserting the driver in windows install, but does not.
    I think that the driver for a hardware RAID card and software.

    I have try to disable the LSI RAID in the advanced bios "SouthBridge". After I disabled I don't know how I can do to start on the hard drive.
    When I go to the start menu (F6) I see absolutely nothing in drive.

    I test this on two Cisco server.

    I can't know what I can do now. I take a working installation tomorrow and nothing.

    I join you a photo of the boot sequence LSI.

    Thank you very much.

    Sent by Cisco Support technique iPhone App

    Stephane,

    For what I understand, you use the RAID controller integrated, therefore, these drivers will not work you:

    -LSI 92xx

    -LSI 106xE

    -LSI 2008 M

    -INS 3081E-R

    -LSI8708EM2

    -LSI 9201< all="" of="" the="" above="" are="" not="" the="" controller="" you="">

    -CISO 1225 x< this="" is="" for="" the="" vic="">

    -CISCO P81E< this="" is="" for="" the="" 1st="" generation="" of="" vic="" cards,="" so="" definitely="" not="" a="" raid="">

    Pilots are organized into top level by operating system folders, and each folder of OS has a structured series hierarchically who become more specific subfolders so that you can find the exact drivers you need. When you navigate to a folder containing the drivers, it will contain also one or several README files that explains what are these drivers in particular.

    Here is an example of the structure of folder for Windows:

    Windows    ChipSet       vendor          blade-model-number             OS-version-number                All                ia64                Lang (contains language subfolders)                Vista                x64

    You need to look for: /< OS > / storage/Intel/C600 /.< if="" you="" are ="" doing="" the="" installation="" of="" the="" os="" through="" the="" kvm,="" you="" first="" need="" to="" un-mount="" the="" os="" .iso="" image="" to="" mount="" the="" drivers,="" once="" the="" drivers="" are="" done,="" un-mount="" the="" drivers="" and="" mount="" again="" the="" os="" .iso="">

    If it does not, you better open a TAC case that will allow us to put in place an additional troubleshooting Webex meeting.

    -Kenny

  • Re: Satellite a660 - problem with HARD drive!

    Hello!

    When I turned on my computer this morning, first time I heard the HARD drive worked very noisy. It was like buzzing and clicking, has never been like that. Computer is 3 months old, bought in the pc world.

    If anyone can help what to do?

    Thank you

    Hello

    > he was like a buzzing and clicking on... Was never like that. Computer 3 months ago.

    Sometimes, this can happen with the new hard drive too. I recommend you save all data, if it stops working. In case you, I communicate with the service center and ask them to replace. they will do it for free. you see, it looks like mechanical problem and don't think you can fix it yourself

  • Problem with hard drive

    Hello world

    I have my laptop Thinkpad Lenovo R60 (R series) during the 2007 year of the College. Last month I had some problem with my hard drive, then I took my laptop to the Lenovo service center. Then they were replaced with new hard drive, after that, I tried to install windows XP on my laptop, then it displays message as hard disk drivers are not installed then where can I get these drivers. If you don't know this topic then tell me who contact. Please tell how to solve this problem.

    Thank you

    Jagadish.

    If you attempt to load a generic copy of XP pro operating system, then you must change the SATA from BIOS to ACHI mode to compatibility.

  • problems with hard drive HP envy m6 - 1222sr

    HP ENVY m6 - 1222sr Notebook PC (Windows 8.1)

    Bought a laptop with windows by default 8. Everything was fine. But after the upgrade to windows 8.1 have a problem with the hard drive. The simplest tasks cause the startup hard disk 100%. The system starts to slow down. It is interesting that there is no difference in the speed of read/write. 0.1 mb/s or 10 + hard drive still mb/s is charged to 100%. After the defragmentation - nothing has changed. I suspect that blame the upgrade to Windows 8.1. How to solve the problem?

    PS Sorry for the bad English.

    Everything was much easier than I thought. At first reinstalled Windows and drivers, but it did not help. The problem disappeared after disabling user account Windows and switching to a local account. After 4 days of torment is a feeling that the laptop is running 10 times faster. I hope that this all ends.

  • Problem with HARD drive, loss of disk space of 250 GB to 32, after recovering

    Hey guys, I have sucha a problem and I will be grateful for everyone who can help me. The thing is, that my computer actually windows (Vista Home Basic) has detected an error and after that stop, then automatic recovery system went itno action, but after all this, shares my HARD drive has only 32 GB, if it had 250, could you please help me? !!!

    For any problem concerning the automatic recovery process, contact the manufacturer of your computer.

    This isn't their recovery process, Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • Windows problem with hard drive changed from IDE to SATA connection.

    After a full rebuild (new MB, CPU, graphics and RAM) and install the new copy of Windows 7 Home, everything is great, until I try to connect an additional internal HDD. The boot and then crashes to the windows logo. Additional HARD drive is SATA, but it has already been used on an IDE connection.

    The bios recognizes the drive, but obviously, there's some kind of conflict in Windows (I think the reader can contain a backup of the previous generation system).

    System;

    MB ASUS M5A97 R2.0

    CPU AMD FX6

    Gskill 8 GB of RAM.

    Any ideas on how to fix the problem please?

    Thanks, Chris

    Usually means a player has failed/problematic

    You say sata drive but used on a connector IDE does that mean you are using a cable converter, because the type of interface is completely different, or do you just mean the parameter for the connection of the bios?

  • Problems with hard drives.

    OK so a little history first: I decided to upgrade my windows 7 32 bit to windows 7 64 bit. I copied my entire C drive and D drive on an external hard drive and put it on the Cd for windows 7 64. In any case, after installation is complete, I checked my computer, but my old hard drive (drive C) was always there and always containing all my old files, but none of them were used. For example I have spotify and steam on that hardrive but I still had to re - install steam and spotify and all my games are not on Steam. So now, I'm a bit confused as this drive my computer uses because when I open the DirectX Diagnostic tool, he claims that my main engine is aticfx64.dlls, aticx64.dlls, aticx64dlls. I have no idea what it is. So I guess my question is how can I reinstall my old readers?

    How to recover Documents, music, and e-mail after the upgrade with the Windows.old folder
    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

    Where are my files and folders after upgrading from Windows XP or Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows7/where-are-my-files-and-folders-after-upgrading-from-Windows-XP-or-Windows-Vista

    How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
    http://support.Microsoft.com/kb/932912

    Using Windows.old to retrieve your personal files
    http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 66249.entry? a = 264056520

    How can I remove the Windows.old folder:
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

    J W Stuart: http://www.pagestart.com

  • Problems with hard drive with defraging.

    The hard drive is as follows.

    Hitachi HTS545032B9A300 ATA 160 GB Device

    Scan the drive stops at 23%

    Ken
    To test a suspect HD you must do 2 things described in this wiki

Maybe you are looking for

  • Mail of rsync in El Capitan

    Hi all I have several years synchronized the two Macs separated mail files using rsync. He worked almost without problems until I upgraded to El Capitan, a few weeks ago. Now if I rsync my mail to say my office on my laptop folder, none of mail messa

  • What kind of ports are on the top a h8 - 1320t? None of them is a usb 3.0?

    What kind of ports are on the top a h8 - 1320t? None of them is a usb 3.0?

  • Why my product key is invalid after I had my computer for 3 years?

    OK, I have had my computer for 3 years. I bought my new TI, but they said that I had the opportunity to make windows XP (as they said it was windows vista). If at that time, I changed it to windows XP (it was a real disc / legal). In any case, the pr

  • error message in windows xp reads... Windows-no disk _

    .. .reads... Windows-no diskException Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7cThis message arrives soon I loading windows and stay even when I press on cancel it keep coming back...don't know what that means or do about it... need a

  • Bridge of the song for Mac storage error

    Hey,. I got my Xperia Z3 Compact phone for several months now and I deleated the music on my phone and now impossible to add more on Sony for Mac bridge. I reinstalled the bridge several times but it keeps saying the same thing. The bridge of Sony fo