Toshiba P10 504 does not start!

Similar Questions

• Satellite P10 504 does not start after upgrading RAM

  I just sticks of 2 x 1 GB of DDR 400 soddim and no start.
  After reading on what I could find on similar models, now seems that these older laptops cannot manage that fast of ram?

  With the help of some 266 DDR would be more appropriate?

  Hello

  If the computer laptop doesn't boot then there is a great chance that the RAM is either not compatible or it s faulty.
  I think that it s is not compatible.

  I found this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7090&ft=m&St=3

  According to this page the P10 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * bars!

  If your RAM is not compatible!

• Equium M40X: I get to the banner of Toshiba, but Windows does not start

  When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.

  Any suggestions as to what could be the problem?

  Hello

  What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?

  Equium M40X successfully passed this screen?

  If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
  In this case primarily the motherboard fails

  But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.

  Try to study a little

• Satellite 2410-504 does not start

  Hi all

  I have a laptop toshiba Satellite 2410-504 sick.

  When to start he says: -.

  "Windows was not start because the following file is missing or corrupt: \system32\ntoskrnl.exe.
  Please reinstall a copy of the above file. »

  Ive put the Windows CD in the CD player and I went into the BIOS and select CD-ROM as the first priority but it fails to boot from the CD and everything continues (which is) at the start of the HD.

  When I changed the priority of WOOD he came with a

  PXE - E61: Media test failure, check cable of

  So after reading this error message I have check the HD is installed and disabled net card in the BIOS but when even does not start and returns the error message as above.

  Any other ideas? Is the broken HD?

  Why it wont boot from CD?

  TIA
  Yuppski

  HARD drive is recognized in the BIOS?

  I can't say for sure, but somehow I think the HARD drive's troublemaker.
  When you do all this is some odd reaction? STRANGE begins to read the disc in Windows?

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• Satellite P10 554 does not start

  Hello!

  First of all, sorry for my bad English

  The problem:

  I installed windows XP Professional on my Satellite P10 554.
  I bought it on ebay and the seller said that everything goes well with this laptop and the tests when I turn on the laptop saying the same thing.

  But after installing XP, it does not start!
  It is the boot screen with the blue line that moves. This line moves a little, that it stop and that all the time and nothing happens!
  I tried the same thing with XP home, and windows 2000, but it has the same problem!
  I really need this phone. I hope someone can help me!

  Christian

  > I bought it on eBay and the seller said that if everything goes well with this laptop and the tests when I turn on the laptop saying the same thing.

  You said that the test says it of ok. How did you test it?

  > It's the boot screen with the blue line that moves.

  You mean the OS bar which moves while loads the OS. Am I wrong?
  Hmm, if you have tested the laptop with Win XP and W2K then I guess that you have installed the two OS on this laptop and it was possible to install it?
  Am I wrong?

  Sorry to say but if the laptop is unable to load the operating system the hardware would be a malfunction.
  I think you should first check the memory modules, then the HARD drive. Maybe one of the modules does not work correctly or some bad sectors can cause the problem.

• Product is complete recovery - Toshiba Portege M300 does not start

  Hello.

  I have a Portege M300 Toshiba I got again in 2006. It has progressively slower over the years, so yesterday, I thought I would use the product recovery CD to reinstall the factory settings.

  Put the CD in restarted with F12, selected CD player, follow the instructions on the screen, he went through unpacking process... but once completed and handed over to market get you the Toshiba welcome screen then it seems that it will start, but it blocks just with a white screen... nothing not even a cursor flashing.

  The hard disk does not even appear to be spinning?
  I tried this process now 6 times and I'm starting to pull my hair!

  Anyone got any ideas?

  > The hard disk does not appear still to be spinning?
  Well, it looks like a disc is defective.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  I think that you need to replace the HARD drive and should reinstall the OS once more

  Good luck

• P10 504 does not and will not power work

  Hello

  I'm having difficulties with my P10-504. I plug my charger to the rear of the unit and nothing happens. No lights come on at the front and no charge or turn on the power to the laptop.

  I have some charge left in the battery and it shows that the computer is operating from battery (battery) power and no power.

  I checked to make sure that the charger works with a voltmeter and it seems fine.

  Is someone can offer a soloution for me?

  Thank you

  Adam

  Hello

  If the adapter works correctly and is not broke so the only possibility is an electronic supply failure. You can't solve this problem by yourself.
  I recommend you contact the ASP. He must check the portable electronics

• Satellite 2410-504 does not start after you remove RAM module

  Hello

  I need assistance or advice.

  I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

  After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
  The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

  Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
  Could I have caused permanent damage or are my actions retreivable.

  Thanks in advance,

  Mike-c

  Hello

  Did you check if the RAM has been inserted correctly?
  Select this check box.
  But of course, the RAM could be damage due to wrong treatment nothing is impossible
  My computer laptop didn t start because one of the RAM died suddenly.

  What you could do is to remove the battery and unplug the AC adapter.
  Then you have to wait a little (one hour) and need to connect the two parts again.
  Then try turning on the laptop computer.

• Toshiba Q300 480 GB HARD drive does not start after migration

  Hello

  I bought a disc of Q300 489 GB to replace a small 840EVO of Samsung. I used the toshiba tool to clone the smallest to the largest player. However when the clone is finished and the reboot of the machine the machine hangs just at the start of the process (before starting windows 10). If I go back to my little samsung it starts without a problem.

  I tried to treat twice with NTIEcho and also tried with Partition AOMEI tool, all attempts have failed to start on the Q300 drive.

  I am just tempted to refer the reader to Ebuyer, getting another Samsung. Maybe Toshiba can tell me how to get the drive working properly?

  Regards Sean

  PS. can someone direct me to a page where I can raise a ticket of Toshiba, I would be grateful. There seems to be some links broken on the UK site.

  Hello.
  Do you have an error message when the operating system does not start? Appearing in AOMEI Partition Wizard you have been used during the replacement of the Samsung drive?
  After the largest disk cloning, you may need to change the boot settings in the BIOS or to remove the previous Samsung drive to test.

• Toshiba Satellite L70 - B does not start the BIOS or OS

  Hello

  I changed the same parameters (UEFI priority CSM to start: FIRST USB) in the Bios and saved them, now computer laptop does not start, I can't enter BIOS more... Just see a black screen... I tried to remove the pulp and power, clicked on the power 1 m button, but nothing has changed...

  I can fix this please

  Laptop model: Toshiba L-70-B

  Any help please?

• Toshiba L 40, 7335 does not start

  I have a Toshiba smart l7335, that it does not start.

  At the beginning the indication led starts green and at the end of 2-5 seconds looking past automatically mode and indicator led turns red.

  The screen seems to be turned on but no signal at all or the remote control does not work.

  I did reset procedure disconnect the apparatus of power but the problem is the same.

  Any reset procedure is possible?

  > Any reset procedure is possible?

  This procedure does not exist for TV sets.
  I'm afraid that the material of the TVs is affected and probably the engineer must verify your device TV m.

  So my advice is to get in touch with service partners as soon as possible.
  I hope that the warranty is still valid and could be repaired for free.

• TOSHIBA HWSetup in Control Panel does not start

  All the updates of Bios, drivers, WindowsXP SP2 is installed. The utility called "TOSHIBA HWSetup" does not start from the control panel. Could use some help here because I like to adjust some more advanced settings of my laptop.
  PS: How can I access the Bios settings?

  Hello

  I put t know which model of laptop you have, but in my opinion, you should try to remove this utility and install it again. You can download it from the download from Toshiba site.

  Try to enter the BIOS settings using the ESC key at the beginning upward.

  Good bye

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• my wifi is not working, and my troubleshooting does not start on my computer toshiba laptop? and he tells me that my bluetooth must be turned on?

  my laptop WiFi does not work and when I try to trouble shoot the problem he told me that my troubleshooting does not start and also, I get a message telling me that my Bluetooth is turned off?, but this problem all started when I tried to sing on the web and it keep going back to the sign in screen then I cleaned a lot and finally was a less able to get to my office on it but still no wifi and not able to start troubleshooting and still receive a Bluetooth message not on. ????? Help! Please, I beg you!

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the computer?

  2. what exactly happens when you try to connect to a WI - FI connection?

  3. you get any error message?

  4. are you able to connect to the Internet by cable?

  5 are. what store you referring?

  6. what operating system is installed on your computer?

  7. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  If this is a recent problem, then you can try a system restore to Normal mode or safe mode and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please follow these recommended steps and post if you still experience the problem.