TOSHIBA Power Saver 0x7E error

Hello.

It's the short history of XP on my Satellite A200 - 14 d:

I can't stand Vista, therefore 2 or 3 days after the purchase of my laptop and try Vista, I decided to install my WinXP Pro. At first, it was REALLY hard for me to find drivers. I even installed some Tohiba not who, by the way worked just fine. Then Toshiba began to publish its own non-experimental pilots and I was happy. Everything worked well. After almost a year I was "forced" to reinstall my OS (once again: WinXP Pro). Everything went according to plan, and after 30 minutes, I was greated by the Windows XP Welcome screen. The first task was to install the appropriate drivers.

Well, very well. I downloaded the latest drivers before reinstalling and kept them on another partition, I was ready to go. I opened the file TXT "new facility" and began to install everything on this list (which of course I downloaded from the Toshiba site). I installed all the drivers in the line, they must be installed (although I don't really know what that some of them may be of no use to me, like a fingerprint, since I have no such thing, but fine - I can't live without a few megabytes :)) until the famouse "Power Saver Utility" has come.) I read in many forums here on this problem, but I never found a solution :(:(:(

When I tried to install the utility, it spits out an error message with code 0x7E (?). Whenever I boot my OS, this triumph of message on my desk ruin my mood :( I tried to uninstall it (although it is not completely installed - the only thing that shows something on this subject is an icon of the control panel which, pressing on, says that I don't have sufficient rights to access the file (even IF I'm in administrative Mode) and registry keys, which does nothing (I removed it and always appear the messages that I mentioned above)).

I tried to remove it, but once again with error 0x7E message at the beginning of uninstallation. I even REINSTALLED my OS again and again by installing Power Saver mistakes occur :(:(:( This surprises me a lot, because I've never had such a problem before even the fact that I have not followed the installation instructions. I really need a solution to this. I want to install Vista and the recovery disc. I would if I knew there was no average athor, but I'm sure there is because of the fact that I had no problems before.

Yes, everyone throws - help. Because without energy saver, my laptop is like your desktop PC, that is--needs to stay connected with alternating current :( And it is not appropriate for a laptop.

PS: I forgot to mention - no change in the BIOS has been done, although I don't think that this has nothing to do with my problem.

Hello

Have you tried two versions of power saver on the Toshiba download page?

Tags: Toshiba

Similar Questions

  • Satellite L30-106: Power Saver 0x7E error

    Hi all
    I own a Toshiba Satellite L30-106. I got it from Windows Vista to Windows XP pro, I installed all the Xp drivers provided by the Toshiba site.

    Everything is going well except for the Toshiba Power Saver utility, I can't install it, it still gives this error: error Power Saver 0x7E. Same thing happens when I want to uninstall it. How can I solve this problem?
    Thanks in advance

    Hello

    I hope that you have installed the power saver right!
    The laptop is one of the series PSL33E. Therefore, you should choose the drivers and tools for this series!

    In addition it is very important to install the driver Toshiba and utilities in the right order!
    Then open the installation instructions and follow the lines of this guide!

    Please make sure that you have already installed "TOSHIBA common Modules or / and TOSHIBA Hotkey Utility" ahead!

  • TOSHIBA Power Saver - fatal error OX50

    Hello

    Recently, I have a big problem, my Toshiba power saver.
    It triggers a fatal error OX50 and I tried reinstalling several times and it doesn't work.
    Please how can help me solve this problem?

    Hello

    Fatal error with Power Saver hmm I read a few threads on similar problems and it does seem that the completely OS restore Toshiba recovery CD could help settle the energy saver

    But may I ask if you install all the drivers in the correct order?
    Usually the installation instructions are always placed on the page of the Toshiba driver and it s necessary to follow this guideline.

  • Re: Toshiba Power Saver fatal error. Code 0 x 0

    Hi all

    I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

    It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

    I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

    I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

    Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

    Thanks in advance.

    Raymond

    You must delete it from the registry.

    Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

    Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

    PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

  • Code Toshiba Power Saver Fatal Error 0x51A Tecra M9

    I just bought 5 Tecra M9 and I have the same problem with them whenever I start the laptop:

    "TOSHIBA Power Saver.
    A fatal error has occurred. This program will be terminated code 0x51A'

    And sometimes:
    "TPSMain.exe Application error".
    The application failed to initialize properly (0 x 0000043). Click OK to close the application '

    If I try to open Toshiba Power Saver utility from the control panel it return me to select power mode Toshiba in the list of management of power supply in Power Options, but there is not any diagram power Toshiba on the list.

    Any suggestions?

    Thank you.

    Hello

    Have you tried to reinstall the Toshiba power saver utility?
    Please do it!

    I had a similar problem of Eve on my laptop satellite.
    I finally solved this problem by reinstalling the energy saving and the utility of Modules common Toshiba.
    The common modules are required to run other programs from Toshiba as for example energy saving.

    Just another clue; especially this program error appears because of a corrupted registry.
    You can use the freeware like CCleaner to clean the registry entries.

    Best regards

  • Power Saver 0x7E error

    Hey, I removed the windows OEM pre-installed and installed my windows, I downloaded all the drivers and software on the site of Toshiba, it all works except the energy saver. When it is installed and want to start, I got the error 0x7E. When I want to remove to install another version, I also got this error.
    Does anyone know a solution? Thank you

    Hi Bjorn

    On this forum I found a few topics with similar theme, but unfortunately there is no universal solution. Obviously a registry entry is wrong and reinstalling doesn't help at all.

    I noticed that the problem has been resolved after the reinstallation of the operating system with recovery media. On this way the unit has again factory settings and should not have problems again. I'm sure other applications installed on your device may be an advertisement influence on the sleep feature power.

    It's really not easy to say why this is happening.

  • Qosmio G20, Toshiba Power saver error

    When I turn the Qosmio G20, I have a message "Toshiba Power Saver, fatal error has occurred, this program will end. Code 0 x 2»
    I click on the 'ok' button and can use the computer, but after using for a while (about 1 hour for example), it becomes very slow. I check the Task Manager and find that "ccSvcHst.exe" takes up 99-100% of CPU usage. I have to turn power off, then again to use another 1 or 2 hours before slowing down again.
    Help, please.

    Have you tried to delete Toshiba saving energy of the system and see if the laptop will slow down again?

    Have you tried to reinstall Toshiba power saver?

  • Error of Toshiba power saver - A60

    When I install the Toshiba power saver on my laptop A60 with WinXPpro SP2, it
    Displays the following error:

    A fatal error has occurred. The program will end. Code: 0x7E
    Also at the opening of the power saver option in the control
    Panel to get the message: could not open energy like u
    am not prepared the administrative rights to open it.

    Hello

    Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9573&messageID=33773#33773

  • Toshiba Satellite Pro M30 & Power Saver stop error

    Hello!

    I am struggling with this problem for months... the latest version of Eve on my toshiba satellite pro m30 running windows xp with service pack 1 installed gives a message box with an error message when the stop and I'm unable to eliminate this error. Unfortunately, I can't consider reinstall the system from scratch, because there are many other applications installed and I can't lose the settings for them. I read the forums and realized I'm not one of the problems with toshiba power saver. I'm even lucky to successfully at startup started it! Yet, it hangs at shutdown. It's pretty boring. also, I downloaded all the latest updates of this site for my laptop, including even the bios update.

    I would like the opportunity to be able to download the version without toshiba this site energy saving bug, and I'm sure many other people would appreciate the patch too!

    any comment on that?

    Andrew.

    Hello

    If your laptop is installed correctly it should work well. All the software has been tested. The only reason for your problem may be additional software that you have installed later.

    It is also possible that it may be caused by an Antivirus application. Maybe an application runs in the background? There are many reasons that may be responsible for this problem.

    If you reinstall your Notebook of recovery CD it will not work properly. It is very unjustifiable to write on some versions bug-free. I sometimes have problems with BONES, but almost always after using some freeware.

    Good bye

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

    Hello

    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

    Hello

    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

    When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
    Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

    But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

    I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
    I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

    Hello

    Satellite L300 - 17L belongs to the PSLBCE series.
    I chose this model number and found exactly the same energy saving that you tried to install.
    So I guess that you have chosen the right Power Saver utility for this model of laptop.

    But did you also install the common Module?
    This software must be installed first before installing other tools.
    Update you the Win XP for the State?

    Check it!

  • Meassage error (Toshiba Power Saver)

    When the computer starts it is meassage (toshiba power save) a fatal error has accurred this program will be terminted code 0 x 0
    What is the proplem please?

    Hello

    It will be very interesting to know what type of laptop do you and which version of Power Saver is running on the device.

    Good bye

  • Order of error has been committed by satellite P500 - service TOSHIBA Power Saver

    Model:-PSPE8A-025002
    [http://www.mytoshiba.co.nz/products/home/notebooks/satellite/p500/pspe8a-025002]

    OS:-Windows7 Ultimate (32 bit)

    On start up to get a service stopped notification - "service TOSHIBA Power Saver was arrested, so cannot be changed".
    That is the only other cause the change of Windows 7 known behavior where the Eco Power Saver button is no longer works but the Control Panel/Power Options standard I can select and edit power plans as usual. So it is just an annoying pop up on start up.

    Tips to prevent the annoying notification welcome.

    BR /.
    Rob

    Hi Rob,

    Have you tried to reinstall Toshiba Value added Package? It contains current saver where you get this error message. You can download it here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I also recommend reinstall the Eco utility.

    Good luck! :)

  • Receive the error message when you try to install Toshiba Power Saver

    Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.

    For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.

    Hello

    where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
    When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).

    Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
    Please, more details on your problem. :)

    Welcome them

  • Satellite L300-1F8 - how to uninstall Toshiba Power Saver?

    Hello

    I have Windows 7 on my laptop. Accidentally, I installed the saver of energy for XP and I can't uninstall it (error 0x7E).

    Do you know how to uninstall it?

    Hey Buddy,

    Normally the Toshiba Power Saver is designed for XP only so I think that's the reason why you can t uninstall it.

    In any case, you should try it with CCleaner. This freeware tool can also remove installed programs, as well as s worth a try! :)

Maybe you are looking for

  • IPod stolen

    I had my Ipod 5th generation stolen... A week before taking, I have it synced with my computer to put new songs on it... My question is, I had photos on this Ipod I do not download to my perceive computer... There's these photos on my iCloud and how

  • Qosmio G20 - 102 Shutting down unexpectedly

    HelloI've known a lot of problems with my computer laptop qosmio, this all started in the summer 2004, since then ive sent several times to the dealer of Toshiba to Malta, taho. And they said it worked perfectly well when they tested. Quite strange,

  • masking of the vi duration

    Hello... I hav a request 2 to be executed anytime in the pc... is it possible to run an exe still hide it... Before, I solved this problem with demand assing to Task Manager. But I wud rather than like that, would like to know is there any way provid

  • Photoshop CS6 and pulled down a window after the computer screen

    I'm on a MAC and Photoshop CS6 and pulls a window down after the computer screen. How can I get that back?

  • The CC engine on mac keeps popping open

    In what now seems to be random automatically opens the window CC, is the one who comes down from the toolbar.  I have run all the updates and complete all the installation steps.  It kinda makes me mad.  The only thing verified in the pref's «See the