TOSHIBA Power Saver on Satellite A300 PSAGCE with Vista OS

Similar Questions

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• Is there a Toshiba Power Saver for Satellite M45 with Vista

  Dear all,

  Is there a version of TOSHIBA Power Saver for windows Vista that do not check the model of the computer before installation because I Satellite M45-S265 and I know that it is not supported for Vista, but I got vista successfully work on GST on it to help I will be grateful.

  Kind regards
  * Fr. Mohamed Hussein *.

  null

  Hello

  You're right about the support of Vista. AFAIK there is no version of universal power saver, but in my opinion you don't need it at all. Tool for Vista does not seem like the old version and Vista many parameters were taken over from Vista itself.

  Because of that I'm sure you didn't need at all. Be happy that Vista works well on your laptop satellite. Optimize the operating system and enjoy.

• Utility TOSHIBA Power Saver for Satellite L40 - 17R

  Hi all...

  Firstly, thank you for the answer to my previous question, which got much help. I have another question. I had a laptop Tecra A4 before that ships with Toshiba Power Saver utility that can control the brightness and the different profiles of power for Windows. I now L40 - 17R computer laptop, which I cannot find the same utility for?

  Can someone tell me if there is a tool for the management of power supply for model L40 - 17R profiles, and where can I download it?

  Hello

  As you know for Toshiba WXP gave Toshiba Power Saver utility, but for Vista, this tool does not exist in the same format. Many functions now is in the Vista power settings. Utility TOSHIBA Power Saver is also there but just with several options.

  You can find it if you open the power options > change plan settings > change advanced power settings. You will find Toshiba Power Saver Settings V8.02.00.

  Good bye

• Where to download Power Saver for Satellite A110-159 with XP

  Hello

  I have this laptop for two weeks now.
  At first, I got toshiba power saver as an icon.
  But since about 4 days ago I have no more.

  I have not marked in my msconfig / startup but I did not remove it.
  I tried to mark it again, but he disappeared into the system startup.

  Toshiba power saver is in the Dutch language, can I download it somewhere in the Dutch language?
  I hope someone can help me.

  with respect,
  Beba

  Hello

  See the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com-> support the Dowloads & -> support home page-> download drivers

  You will find pilot energy-saving and utility energy savings. Before you begin to install power saver utility of the driver must be installed!

• How to install XP in Satellite A300-1BI with Vista

  Hello

  A few days ago, I bought a Satellite A300-1BI with Windows Vista preinstalled. I don't like this OS and I want to degrade for Windows XP and also install my Ubuntu Linux distribution, but I cannot install lame of them because the hard disk appears as "not connected" on men to install XP and Ubuntu... It seems that the laptop is made ONLY for Vista and I think that it's... pathetic...

  Can someone help me? I tried to search for information on the web, forums, etc., but it seems I'm the only one with this problem.

  Thank you!

  Estemon sorry but I cannot believe that you wrote here. It's more poised to last a year and you can find so many threads here with the same question. In a minute I found, for example, what a http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787

  It's Satellite Pro, but the principle remains the same.
  Check it please satellite a category on this forum and you will find answer to your question.

• Satellite A300-1BZ with Vista - Port Com disappeared

  Hello world.

  My first time and I'm a bit of a dunce with technical stuff, so please be gentle with me!

  A300-1BZ with Vista.

  Some time ago I installed "CarSoft V.83" (diagnosis engine) of CD on my laptop. He asked me to check the com port.
  I looked in Device Manager and in the list that I saw "port com 4". OK, we'll go with that then. Everything worked well and I was luckily away talking to my car.

  Yesterday I went to use it for the second time and he says there is an error with the com port and 'check' the com-port.
  So, I got the Device Manager to the top and there is no mention of any com ports in the list! It is the last time I looked, and now he's disappeared!

  I was at a loss what to do, I uninstalled the CarSoft, then re-intsalled once again. Received the same error message.
  Went to Device Manager. Still no com port 4 from the list, or anything that pertains to a com-port.

  I don't know how or if I can get it back.

  Help, please!

  Hi mate

  First of all there is no COM port. The com port that you could see in the Device Manager has been a virtual port created by the software of the car.

  What to say
  I recommend to remove the software of the car of the first installation.
  Then download the CCleaner and clean registry and system entries.
  Restart the computer, and then rerun the CCleaner
  After that, install the software in the car again

  Maybe it helps

• TOSHIBA Power Saver on Satellite A60

  Hello
  I have a satellite A60 and you have a problem with the energy saver. It seems that my virus/adware application has deleted parts of the energy-saving App. No problem, I thought, I'll reinstall it tools and Utilities CD - wrong!
  The Power Saver software on the CD has a 16-bit installation program that is not working under Win XP, have you tried the site Web of Toshiba (UK, Europe and USA), no luck - same 16-bit installation program.
  Any help please!

  Hey there

  couldyou please click the link below

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324767

  This isn't a failure with the Powersaver but with Windows XP. In the article, it says that you must use a XP cd but rather than this, you can use the I386 folder under drive c.

  See you soon

• XP installs not on Satellite A300 PSAGCA with the AHCI enabled

  Hello... I hope someone can help,

  As the owner of a Toshiba product and having to rebuild the .inf for the HD one audio file couple of years ago, I was invited devours advice here for my problems with XP facilities with several friends who have decided to abandon Vista and UPGRADE to XP.

  My brother just bought an A300 PSAGCA-03C010 after that I made that I would be able to install XP as some of its video editing software which only works on XP.

  In desperation after spending almost 2 full days to try to get it to work in AHCI mode... I have someone ask if they found appropriate for Intel drivers:

  Intel PM45 rev 07
  South chip Intel 82801 IM (ich9-m)

  I slide 3 dics streaming with the drivers of Intel so far and all go as far as loading XP but when finally restart XP get the BSOD... it is with AHCI in the bios. I can easily install XP with compatibility mode, but the performance of the system is slower than a P3 with 256 MB of ram.

  I find drivers from Intel, but none of them actually SIMPLY specify ICH9-m or 82801-IM, which is the exact chipset of the laptop going by CPU - Z and, of course, none of them work after the initial format in AHCI setting.

  So I'm better off just to exit the bios on the compatibility setting because it needs XP to its programs work and suffering from the loss of major speed or anyone know driver exact sata I need to wake or anyone know how to install the drivers after installing in XP compatibility mode... I tried several methods without success.

  Thank you
  Mark

  Hello

  You have not installed the SATA drivers and so you are not able to install the XP with AHCI enabled.

  You tired to include the wrong chipset. The SATA drivers are placed in Intel Matrix Storage Manager.
  The IMSM contains the SATA files that could be included in Win XP using nLite software.

  I recommend downloading the IMSM from Intel page and choose the package that contains the files and folder of disk I think the file is called F6FLPY

  Big names

• Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

  I have problem with Vista - it became too slow so I want to get back to factory settings.

  I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

  I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

  And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

  Delivered using the recovery media, you will be able to install Vista.
  Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

  Bye and good luck!

• Error of Toshiba power saver - A60

  When I install the Toshiba power saver on my laptop A60 with WinXPpro SP2, it
  Displays the following error:

  A fatal error has occurred. The program will end. Code: 0x7E
  Also at the opening of the power saver option in the control
  Panel to get the message: could not open energy like u
  am not prepared the administrative rights to open it.

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9573&messageID=33773#33773

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• Satellite C850-1E7 - need Toshiba Power Saver for Windows 8 64 x

  Where can I download Toshiba Power Saver for Windows 8 x 64?

  Hello

  C850-1E7 satellite was already pre-installed with Win 8.
  All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver

  However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.

• Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

  Hello

  By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

  Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

  So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

  Hello

  Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
  In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

  Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

• TOSHIBA Power Saver won't work on the account with limited privileges

  Good day to all.
  I have old Satellite 1410 and for security, I am working on an account with limited privileges. I can't start Toshiba Power Saver, I get "access denied" message.
  I need to remove energy saver and I use Control Panel Power Option, but I can not here the default brightness.
  Can someone help me?

  Janusz

  Without system administrator privileges, many system options are locked and could not be used.
  You need admin rights to access this tool.