TOSHIBA Power Saver replaceable by SpeedSwitchXP?

Similar Questions

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• P30: I need a 32-bit version of toshiba power saver Setup

  Hello

  I need a 32-bit version of the installer of toshiba power saver for the P30 please, I hope that it is possible :)

  Thanks in advance :)

  Sincerely, James.

  Post edited by: jamespic

  Hello

  I put t know why you need a gain of power in particular but I found a Power Saver for Win XP on Toshiba website. I think it's running at 32 bits.
  See the page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• Satellite C850-1E7 - need Toshiba Power Saver for Windows 8 64 x

  Where can I download Toshiba Power Saver for Windows 8 x 64?

  Hello

  C850-1E7 satellite was already pre-installed with Win 8.
  All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver

  However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.

• Re: Toshiba Power Saver and administrative rights

  I have set up another user with administrative rights but cannot access toshiba power saver to change settings.
  I have to open a session as long as the original user to change anything either.

  Help

  Hello

  As far as I know the admin can only change the settings to save energy and can assign and configure power profiles.
  The user then, else can not change. It is not possible

  Greetings

• Utility TOSHIBA Power Saver for Satellite L40 - 17R

  Hi all...

  Firstly, thank you for the answer to my previous question, which got much help. I have another question. I had a laptop Tecra A4 before that ships with Toshiba Power Saver utility that can control the brightness and the different profiles of power for Windows. I now L40 - 17R computer laptop, which I cannot find the same utility for?

  Can someone tell me if there is a tool for the management of power supply for model L40 - 17R profiles, and where can I download it?

  Hello

  As you know for Toshiba WXP gave Toshiba Power Saver utility, but for Vista, this tool does not exist in the same format. Many functions now is in the Vista power settings. Utility TOSHIBA Power Saver is also there but just with several options.

  You can find it if you open the power options > change plan settings > change advanced power settings. You will find Toshiba Power Saver Settings V8.02.00.

  Good bye

• TOSHIBA Power Saver for Qosmio F50?

  I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

  What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

  The series F50 there as well? If Yes, where can I find it?

  Hello!

  As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

  TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

  I've created an interesting article here in the forum for you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=142522

  Good bye

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• TOSHIBA Power Saver - SP6000 question

  Hello

  I recently had to reinstall the Toshiba Power Saver on my SP6000 utility. Since then, I can't find any possibility to change the method of 'cooling' ('optimized battery', 'performance' etc.).

  Can I have EVER had, so I could be talking nonsense here :-) It's just that I seem to remember having this option before. I'm trying to force my laptop shorten the CPU rather than keeping the cooling fan marketing every few minutes, and I thought that was possible using the method of "cooling".

  Any help would be appreciated.

  See you soon!

  Hi, Jerry

  First of all, I hope that you have installed the appropriate for your model energy saver. ;)

  Launch the energy saver and Power Save Modes tab there is an option called FULL POWER subsector first. It must be marked, and then click details. At full power, properties select tab power saving Mode and there is option method of cooling. On this site, you can choose between three options:

  -Maximum performance
  -Performance and
  -Battery optimized

  I hope this little description to help you.

  Good bye

• How to make Toshiba Power Saver working in Vista?

  Hello...
  Is there a way to make toshiba power saver works on vista?

  If not, is there any other 3rd party program that does the same thing? Or y at - it news that toshiba is developing this program for vista?

  thanx

  Hello

  you will laugh, but do you know who developed the powersaver for vista?
  It's toshiba (Yes :)), and all functions are adapted from current saver original toshiba XP. If you don't need to download anything, because all functions are already supported. :)

  So, just the question why do you ask? ;)

  Welcome them

• Receive the error message when you try to install Toshiba Power Saver

  Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.

  For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.

  Hello

  where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
  When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).

  Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
  Please, more details on your problem. :)

  Welcome them

• Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

  Hello

  By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

  Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

  So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

  Hello

  Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
  In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

  Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

• Toshiba power saver is unbootable

  (Satellite M40x)

  Hi all

  I need help, such as every time that I am pressing energy saver Toshiba told me that I have to open windows power options and use the Toshiba power saver, but I can find it there in the diagrams. I have chenged the parameters once accidentally a normal windows and settings for the Toshiba power saver no longer works.

  I tried to re - install (download formtoshiba site), but now I get an error when starting...

  Please help because I lack the characteristics

  Sander

  You must go to the window power options and change the POWER SCHEMES drop-down back to ECONOMY of ENERGY TOSHIBA. Except if it is positioned like this energy saving windows will always be the default.

• Toshiba power saver disappeared completely

  Hello

  My "Toshiba power saver" disappeared - there is still an icon in the 'systensteuerung' but when I try to open it nothing happens. But still when I go to open the windows of Windows XP "energy management" tells me to use the "Toshiba power saver.
  This appeared after I used the "steganos security suite" to clean my system. First I did not notice the change because only a few icons in the taskbar where gone. The program must have deleted something. Does anyone know how to restore the "Toshiba power saver?
  I hope that there is another way to reinstall the "Toshiba power saver" instead of reinstalling the entire system...

  .. masse be nice if someone could help me.

  Ciao, Christoph

  Hi Christoph,

  You don't say what model of laptop you have, but you should be abl; e to load the Toshiba Power utility tools and Utilities CD that came with your laptop.

  If you do not have this CD, then you should be able to download the utility from the download section of the Web from Toshiba site specific to your model of laptop.

  HTH

• 'Toshiba power saver' need for my Portege 7020 (WXP)

  I have a Portege 7020ct that I updated to XP to 98. Everything seems to be fine, even if I lost the management of Toshiba power save options. I'm looking for the correct software control the brightness of the display, options, cooling etc.

  Hi Vandervell

  Sorry, but you won't be able to find this utility is not created for Windows XP Home edition. In my opinion, you can use the device without using the Microsoft just food options.