Toshiba power saver won't open

Similar Questions

• TOSHIBA Power Saver won't work on the account with limited privileges

  Good day to all.
  I have old Satellite 1410 and for security, I am working on an account with limited privileges. I can't start Toshiba Power Saver, I get "access denied" message.
  I need to remove energy saver and I use Control Panel Power Option, but I can not here the default brightness.
  Can someone help me?

  Janusz

  Without system administrator privileges, many system options are locked and could not be used.
  You need admin rights to access this tool.

• Re: Toshiba Power Saver and administrative rights

  I have set up another user with administrative rights but cannot access toshiba power saver to change settings.
  I have to open a session as long as the original user to change anything either.

  Help

  Hello

  As far as I know the admin can only change the settings to save energy and can assign and configure power profiles.
  The user then, else can not change. It is not possible

  Greetings

• Utility TOSHIBA Power Saver for Satellite L40 - 17R

  Hi all...

  Firstly, thank you for the answer to my previous question, which got much help. I have another question. I had a laptop Tecra A4 before that ships with Toshiba Power Saver utility that can control the brightness and the different profiles of power for Windows. I now L40 - 17R computer laptop, which I cannot find the same utility for?

  Can someone tell me if there is a tool for the management of power supply for model L40 - 17R profiles, and where can I download it?

  Hello

  As you know for Toshiba WXP gave Toshiba Power Saver utility, but for Vista, this tool does not exist in the same format. Many functions now is in the Vista power settings. Utility TOSHIBA Power Saver is also there but just with several options.

  You can find it if you open the power options > change plan settings > change advanced power settings. You will find Toshiba Power Saver Settings V8.02.00.

  Good bye

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• Toshiba power saver is unbootable

  (Satellite M40x)

  Hi all

  I need help, such as every time that I am pressing energy saver Toshiba told me that I have to open windows power options and use the Toshiba power saver, but I can find it there in the diagrams. I have chenged the parameters once accidentally a normal windows and settings for the Toshiba power saver no longer works.

  I tried to re - install (download formtoshiba site), but now I get an error when starting...

  Please help because I lack the characteristics

  Sander

  You must go to the window power options and change the POWER SCHEMES drop-down back to ECONOMY of ENERGY TOSHIBA. Except if it is positioned like this energy saving windows will always be the default.

• Toshiba power saver disappeared completely

  Hello

  My "Toshiba power saver" disappeared - there is still an icon in the 'systensteuerung' but when I try to open it nothing happens. But still when I go to open the windows of Windows XP "energy management" tells me to use the "Toshiba power saver.
  This appeared after I used the "steganos security suite" to clean my system. First I did not notice the change because only a few icons in the taskbar where gone. The program must have deleted something. Does anyone know how to restore the "Toshiba power saver?
  I hope that there is another way to reinstall the "Toshiba power saver" instead of reinstalling the entire system...

  .. masse be nice if someone could help me.

  Ciao, Christoph

  Hi Christoph,

  You don't say what model of laptop you have, but you should be abl; e to load the Toshiba Power utility tools and Utilities CD that came with your laptop.

  If you do not have this CD, then you should be able to download the utility from the download section of the Web from Toshiba site specific to your model of laptop.

  HTH

• 'Toshiba power saver' need for my Portege 7020 (WXP)

  I have a Portege 7020ct that I updated to XP to 98. Everything seems to be fine, even if I lost the management of Toshiba power save options. I'm looking for the correct software control the brightness of the display, options, cooling etc.

  Hi Vandervell

  Sorry, but you won't be able to find this utility is not created for Windows XP Home edition. In my opinion, you can use the device without using the Microsoft just food options.

• Satellite A110-178 - Toshiba Power Saver for Vista?

  Toshiba Power Saver doest exist for vista? I liked it when you work under XP, but now I switched to Vista Ultimate, and the version of XP does not work under Vist...
  Thanks in advance!

  Hello

  Toshiba has also developed and Power Saver for Vista and will be installed with added Vista package.
  But the energy saving of Toshiba for look of Vista doesn t as the saver of energy for Win XP.

  TOSHIBA Power Saver for Vista belongs to Vista power options, and you can find some additional entries in Vista Power Options.

  But you won't find a stand as only Toshiba Power Saver for Win XP.

  Good bye

• Portege R500: Impossible to install XP in Toshiba Power saver

  Hello

  I have a protégé R500 PPR50E which had Vista on it, but now has XP on it.

  I installed all drivers etc for the laptop and everything works fine except that I can't get the toshiba power manager to install.
  Whenever it installs programs it shows as 0.00 mb and installation when you click to open the control panel in the Add box, or move the section it says "a fatal error has occurred. This program will be terminated - code 0 x 0 - and then if I try to uninstall it to try a reinstall it says: "1628 - could not complete the installation.

  Any ideas anyone?
  I downloaded the correct driver of course - I tried a redownload and it made no difference.

  Also - I may pluching at straws but in the Bios before I made the construction - I turn the controller as opposed to ACHI ACHI compability mode - don't know if it could have an impact on it? -If I turn that on XP blue screens because I never installed the driver in the windows install (f6 prompt)

  Hello

  I believe that you are unable to install the Toshiba power saver.

  We should focus on this error message:
  * 1628 - cannot complete installation *.

  Usually, this message may appear when installing any software that uses the InstallShield Setup program. According to InstallShield, this is a general error message indicating that the application has not been installed successfully.

  Solution check this:
  http://knowledge.Macrovision.com/selfservice/viewContent.do?externalId=Q108464&sliceId=1

  Best regards

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Cannot run Toshiba Power Saver

  Energy saver is installed, but when I try to open it says it is not running, and that I need to go to Power Options, then on power management and select from a listbox of plans. But TOSHIBA Power Saver is not a choice of plan. There are only two choice: laptop & office/Home Office.

  Hello

  I guess you don t use the Toshiba Recovery CD.
  The fact is that many utilities Toshiba needs an extra application called common modules. This application must be installed at the beginning.
  Well, I recommend to check this and try to reinstall the energy saver again.

• Error of Toshiba power saver - A60

  When I install the Toshiba power saver on my laptop A60 with WinXPpro SP2, it
  Displays the following error:

  A fatal error has occurred. The program will end. Code: 0x7E
  Also at the opening of the power saver option in the control
  Panel to get the message: could not open energy like u
  am not prepared the administrative rights to open it.

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9573&messageID=33773#33773

• TOSHIBA Power Saver Equium L20-198

  Hello

  I have an Equium L20-198. When I click on the toshiba power saver icon in the Control Panel, it says "cannot open as the toshiba power saver does not work, go to power options, toshiba power saver, select power schema list box in page scheme of power." But toshiba power saver is already selected in the schema of power section. I'm confused.

  What is an ati graphics accelerator? It seems that every time I turn on my computer. It is said that an ati Graphics Accelerator can use a TV to my computer display. It is recommended to use a TV to display my computer, I'll have to make sure your TV display is enabled, if I do not use the TV to display my computer, I have disable for optimal performance (higher discount rate). What should I do?

  Post edited by: sa008

  Hello

  I wonder about your message
  Why?
  because the Toshiba Power Saver was not preinstalled on Equium L20.
  A Toshiba power saver doesn t exist for the L20 series!
  There is nothing on the page of the Toshiba driver too

  Therefore, the GST will not work on this laptop!

• I can't install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

  I can't install/reinstall/remove/run Toshiba sleep on my Satellite M45-S169. After I reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via Control Panel I saw denied it, and every time that I reboot the system, I get the error message:

  Toshiba power save
  A fatal error has occurred. The program will end.
  Code: Ox7E

  I can't delete or reinstall energy saver. Can I try to run saving for Windows XP SP2 applies for other laptop models? I couldn't find one for my model. That one will fit? Any other solutions / advice to the problem?

  Help, please

  Thank you very much, Oksana

  Hello

  First of all, you knew that this laptop was designed for the U.S. market and all the drivers, tools or any other Toshiba utility should be used on the Toshiba site we.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  Please make sure that you have already installed Toshiba ACPI common Modules before as you continue to any other Toshiba Software installation.

  An important tip; the Toshiba power saver profile must be selected in the Windows power options! Don t forget!