Toshiba RD-XV45 dvd combo will not realize any record on dvd

Similar Questions

• DVD writer will not realize any sound recording

  I can burn the video portion of the DVD very well, but there is no audio data. all retired to device mgr. When I run the HP optical drive test, get a 'mistake' contact support '.

  Hello peter47,
  
  There may be a problem with the DVD writer into the computer.
  
  What make / model of computer are you using?
  What operating system?
  What program do you use to burn the DVD and have you tried multiple?
  You can burn CD which is just audio or do they have the same issue?

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• T520 will not use any device DVD

  People,

  I was going to do a backup, when I noticed that the DVD player was no longer under my computer.

  I when in Device Manager, where he showed with a yellow X... I tried to update the device driver, it said that I had the right device. I've done many other things - nothing has worked.

  I really wanted to get the backup made, so I took my portable DVD player/burner and plugged. The laptop computer found a loaded device OK... but it does not appear in my computer. I had the same problem as the DVD drive internal.

  Then I got a USB drive external Passport, connected to the same USB port, no problems... He mounted the disk and I made the backup.

  My T520 will not use any device DVD... ideas?

  -Fred

  I did a quick search and voila. See the Windows 7 box.

  http://support.Microsoft.com/kb/314060

• Optiarc cd - rw crx880a ata device will not recognize any cd

  I have an acer laptop. It is an Optiarc cd - rw crx880a ata device. It will not recognize any cd / dvd... He appears with insert the cd. I open and close the cd drawer and always the same pop-up.

  My operating system is windows vista.

  Then you know that the drive is bad. You will need to buy a compatible optical drive, Acer or an after-market reputable dealer. Since it is a laptop, you can buy the disc just for her. Yes, it's probably easy to replace. Refer to the manual of your computer or search for a manual on the Acer tech support site. MS - MVP - Elephant Boy computers - don't panic!

• IPad will not allow any fly, so it does not open

  IPad will not allow any fly, so it does not open

  I have the same problem

• Recently firefox will not access any web site Acer Aspire 1 Linux

  For the past few days firefox will not access any site, even if the wireless network is connected ok. NetBook runs ok other applications without any problem. When the browser shortcut is selected, shortened browser turns for a few seconds then stops. Nothing else happens.

  Can sometimes get the message 'cannot run the web browser by default. Input/Output error.

  I had the same problem (Acer Aspire One LINUX). RELOADED FireFox by following the instructions here:

  http://macles.blogspot.com/2008/07/installing-Firefox-3-on-Acer-Aspire-one.html

  Worked a treat.

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• My XP computer will not open any program or website without asking "open with", tried restoring the system

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/my-computer-will-not-open-any-program-or-website/420df6df-8cf3-48e6-810b-a00c3fd04c69

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  the windows system restore feature is a very important system.

  and if it is defective or failed in some way, then this may be a sign that your whole system could be damaged or unstable.

  what you can try is execution of the system via safe mode restore.

  If this does not work yet, so the next step is to move your personal files, documents, photos and send boxes out of the system because the following methods that will help restore your system can put your personal files safe.

  so after trying safe mode stage and or copy your personal files from the system, we can take the next steps.

  Incidentally, if your computer came pre-installed with windows, or you halographic disc of microsoft for the operating system?

• Outlook express 6 will not receive any e-mail, send e-mail

  Outlook express 6 will not receive any email from verizon but not email.  Tired separate identify and clear and redo account?

  An unknown error has occurred. Account: 'incoming.verizon.net', server: 'incoming.verizon.net', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133

  Now it means everything. Error number: 0x800C0133 = a corrupt Inbox.

  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Windows media player will not play a recording of my voice galaxy s2 phone

  Windows media player will not play a recording of my voice galaxy s2 phone

  Hi bowalker,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that windows media player will not play a recording from the Galaxy S2 of the voice phone. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         He has already worked?

  I suggest running the media player settings Troubleshooter and check.

  Let us know if you need more assistance.

  Thank you.

• Windows 7 will not accept any ati driver and catalyst control center at the same time.

  I tried a number of ati drivers. My card is a 4870 x 2 2 GB edition. The driver that windows installs will not accept any CCC.

  I did also install CCC and only driver left. I tried to play Everquest 2, first game to install, and it crashes before the charge, gives me an error of ref dx9.

  I'm assuming that windows 7 has the new package dx so I shouldn't have to reinstall that. I downloaded some of them however.

  I'll try a restore and see if it works. If I could go back in time and never bought this o/s I now.

  This is ridiculous.

  Windows 7 DirectX 11.  You can also download and install v9 and have both at the same time, which is what I have on two different computers for this reason.

  Press the low a 3rd to: http://www.microsoft.com/downloads/en/resultsForProduct.aspx?displaylang=en&productID=9C954C37-1ED1-4846-8A7D-85FC422D1388

• Hard drive will not accept any CD or DVD

  I have a MacBook Pro, OS 10.6.8 version.  The hard drive will not accept a CD or a DVD.  Thinking maybe I left a floppy disk in the drive, I tried to eject, but the eject button does not eject anything.  I have not tried to insert a disk for a long time, so do not know how long it could have been a problem without me realizing it. I tried to shut down the computer and restart, but this does not solve the problem.  I did some research using the Apple Hardware Test, but the instructions say insert the Applications install disc 2.  Unfortunately, as I can't insert a disc, I can't deal with the problem in this way?  Any suggestions?

  Have you tried:

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  What happens when you try to insert a disk? The player makes a noise?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I have a Toshiba laptop and my touchpad does not work any idea on how to fix

  touchpad does not work on my laptop, it is a toshiba...

  Hello

  Some have keys that turns off the pad and many Toshiba have card keys which have a control.

  Control Panel - mouse - Touchpad is here

  Panel of configuration-device - mouse and pointing devices Manager - double click on info pilot.

  If no joy go to Toshiba Support and download the latest drivers for your version of Windows and 32 or 64-bit.

  Go here and put in your info model and search for the drivers for your system

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  =========================================

  It's my generic how updates of appropriate driver: you mainly want to update or reinstall the touchpad drivers
  and ALSO to get the Toshiba value added Package for your version IF it is there.

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• 9.2 messages will not send any messages on MacBook

  I am running OS X El Capitan version 10.11.6 on a MacBook Pro 15 "retina (mid-2015) with 9.2 Messages. I also have an iPhone running iOS 10.0.1 6.

  A few days ago, I got an alert that someone had logged on to iMessage on iPhone 4S that I didn't own. I changed my password, and since I was not able to use the Messages on my MacBook. If I try to send a message using my phone number, he is trying to send a text message and fails. If I try to send from an email address, it sends as an iMessage and fails immediately. Everything works fine on my iPhone, but the conversations from my iPhone will not sync to my MacBook.

  I signed into messages on my MacBook and iPhone. I signed out and back several times on both. My phone number and email are all verified in the context of "you are reachable by iMessage to. I tried to remove the content in ~/Library/Messages/ and empty the trash. I rebooted my MacBook several times. Nothing has worked so far.

  Anyone know what I need to do?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.iChat.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  If this does not work, repeat the above, but remove the com.apple.imagent.plist

  Thank you Leonie and Ralph Johns (UK) , that some information contained in the present.