Toshiba Recovery - 2nd disk does not work

Similar Questions

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Vista recovery disk does not work

  my recovery for a6057c disk will not work after that I used the NeoSmart
  recovery disk.

  After logon to Vista I see that empty office, I can access the task
  Manager by CTRL - ALT_DEL.manager.

  Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
  I just want to make a disaster Recovery and
  all over again with new factory. Does anyone have any ideas?

  I now remove the prtition C on my drive.

  Vista still labels the d drive, I have no C?

  I found the answer on the Microsoft Knowledge Base.

  Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

  The article is also for Vista.

  Article ID: 223188 How to restore the drive letter of the system / boot in Windows

  Would do the same thing.

  I took the article to use regedit to swap my C & D return records.

  Now windows Vista starts OK. (All I had before was just an empty office).

  I also received my HP Factory disaster recovery disks it looks they will work if I need.

• I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

  I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

  THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
  INSTALL WINDOWS
  WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

  AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
  YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                    

  Contact the computer manfacturer, who provided the original discs.

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.

• Re: Recovery disc creator does not work on the Qosmio F50

  Hello

  I recently got my new laptop Qosmio F50. I decided to burn the recovery disk and so I did. But during the burning process, I got an error that is:

  "Diference were detected between different folders:

  Source path: (origin)
  F:\HDDRecovery\SWImg\06907XPS.swm

  Target path: (I would translate as destination)
  G:\06907XPS.swm
  (error code: 02016F-3 c-00000000)

  Well, I've been through the posts from diferent on this forum and I didn't know of any help on this matter. Of course, I bought new DVD-R TDK and I also tried with verbatim DVD-R but it does not work.

  Anyone have any idea how to deal with this issue, because for example I have still no recovery disc and if something would have happened, I wouldn't be able to configure back my OS.

  Thanks in advance for your help

  Best regards

  Hello

  To me it sounds like the final burning self-check failed and the application couldn't t properly compare two files on the HARD drive and DVD.

  Why? It's not easy to say maybe the problem is with the DVD disc not fully supported, but I saw that you used the TDK DVD-R it are really good media and should run.

  Maybe you should try to update the firmware

• Pavilion g series: cannot access the recovery partition & disk do not work

  Try to reset the computer to factory since it does not start in Windows.

  When I try to enter in recovery "esc then F11" it will just try to load windows. Recovery partition is still there just can't access.

  So I try to use disc 5 figure set I did 3 years ago & it starts on the 1st cd, but I get a message saying that the disk is not for this computer.

  I'm like what?  This computer rendered & I have the best recollection no changes to anything that should have caused the recovery to think that there is another computer.

  Suggestions on what I might have to do in order to recover my computer to the factory?

  How can I access the partition recovery from normal mode does not work?

  Why the hell does not work my cd?

  I bought the computer again.

  Any help would be greatly appreciated.

  onelunger wrote:

  Thanks for the suggestion, but I can't return to Windows, even in safe mode.

  If this is the case, then you need the recovery media you can perform a factory image recovery.

  You can remove the hard drive and connect it to another PC through an external drive enclosure or a usb cable to sata. Which will allow you to copy your important data from the drive to another device of storage for extra security.

• Recovery USB disk does not

  Had some problems with my dv6693, downloaded this app HP to make a recovery USB drive, he SAID it was completed successfully and I couldn't do any DVD so I thought, he MUST be. I tried on the original hard drive and it went into the "loading software" but asked me for a password. I tried the password I knew, but they won't. I thought maybe it was something to do with the passwords of user profiles put my trust in HP!

  I thought that I would share that original HD for a 320 GB I have been a HP of the same vintage.

  * Thanks to the problem of welding HP had with these motherboards I'll have to scrap this one... never mind, it was a beautiful unit too! I miss not having HDMI out (I should mention that I toured with the stack of quarters and resoldered it, reworked video! but there was a "humming" noise so I cut my losses) *.

  Taken from the hard drive, installed in it that works, tried to use the USB key recovery I did the software HP that I downloaded and used last night, you know, one that has been "SUCCESSFUL" and NOTHING! Now I don't know how to do it running

  I went into the BIOS, set it so that it starts the USB floppy drive and a USB drive before the HARD drive is internal. The light is on the USB, but then a little time after the windows starts HDD.

  Does anyone know how to confirm the recovery is good on my USB key/stick, whatever you want to call it? and if it's not am I now fuck because I can't do a set of disks?

  I heard there is no way to do another once to define, but there SHOULD be when he wasn't our fault if it does not work? It was software HPs that I used and it said it was successful.

  Can use a helping hand when someone is done with Christmas gifts!

  Rob

  To enable a recovery DVD burning, delete the following two files:

  • c:\windows\sminst\hpcd.sys
  • d:\hpcd.sys

  You can also use the command here file. Right click and save. Then click on how it works. Don't forget to restart after two processes. (Yes, I used this process)

  http://www.thefakegeek.com/2008/07/tweaks-make-more-then-one-recovery-disc-on-HPS/

• Toshiba 40TL838 - sleep timer does not work or works sometimes

  Hello

  I bought 40TL838 TV
  and I have problem with sleep clock

  does not work or works sometimes
  but usually, you see on the screen a minute left and TV never turn off

  I try to change the language and also options the system reset does not help

  and updated firmware is up to date

  any suggestion or help please

  I do not know if you are on the right forum because this forum is for Toshiba computers but let's see if anyone with the same device can help m.

  I put t know what the problem is here, but how it works you can read on page 48 in manuals s document.

  By the way: have you tried to contact Toshiba hotline and ask for help?

• Tecra 8000: monitor and the HARD disk does not work - does not start

  I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

  Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

  So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

  Thank you!

  Hello

  Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

• Toshiba 39L4333DG: DLNA almost does not work

  Hello

  I'm experimenting with my new L4, but I find THAT DLNA almost does not work.
  TV is connected to my router where my NAS is also wired (100 MB switch).

  First of all, to access the directories with more than one material is sloooooooooow.
  It takes minutes to view folders.

  Secondly, it seems that the TV is incapable of making anything: not my audio files in WMA, not my AVI videos or my JPEG files!

  Is this something normal?
  How can I make this work?

  Thank you!!

  > Secondly, it seems that the TV is incapable of making anything: not my audio files in WMA, not my AVI videos or my JPEG files!
  You should check the user 89 manuals page.
  http://www.Toshiba-OM.NET/LCD/PDF/English/L4333-323950-English.PDF

  Here you can find all the details what file formats are supported by using the network connection or a USB interface.

  Only the jpeg image files are supported using the connection network and Media Player.
  Other files of pictures on TV, you can view by using, for example, USB flash memory stick

  About DLNA:
  I think you should check the configuration of the network, as described on page 39