Toshiba Satellite A135 laptop: 0xc000000f - Windows Vista Boot error - > recovery disk does not work, can't get the PC to boot.

Similar Questions

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Vista 64-bit now I changed my OS 32-bit now my web cam does not work, tried to get the drivers from dell but did not help

  of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I check your firewall settings to see if it can cause a conflict with the season chat software.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

  I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

  THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
  INSTALL WINDOWS
  WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

  AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
  YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                    

  Contact the computer manfacturer, who provided the original discs.

• Explorer Windows windows vista ultimate 32-bit edition does not work!

  I recently installed Imgburn and then he started to arrive. I did restore the system using a recovery disk, but still the windows explore does not work. Y at - it anyway to re - install or difficulty of windows Explorer. Any help will be appreciated.

  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.

  You can clean boot
  Troubleshooting http://support.microsoft.com/kb/331796

  --
  ..
  --
  "timeaftertime" wrote in message
  News: 241114ec-dc2d-4842-9869-d3fbf2eb5bc2...
  > I recently installed Imgburn and then he started to arrive. I did the system
  > restore by using a recovery disk, but windows Explorer is still not
  > working. Y at - it anyway to re - install or difficulty of windows Explorer. Any
  > help will be appreciated.

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• C870-121 satellite recovery disk does not work?

  Hello...

  I have a weird problem, I bought the computer 6 months ago and have been happy with it, but I'm protected by a kind of virus and all the operating system has been * ed big time, so yesterday I want to da a factory install with recovery disks that I created when I bought the computer.

  I have the Toshiba system recovery DVDs 4 disc, I insert the sytem disc and look as it should, it loads and then it ask disc of recovery disks, insert disk 1, and after 10 seconds it ejects again and claim a disc again.

  I checked the 5 discs on my other computer and there are data on them and they look good, I tried to insert the discs to see if I'm past them when I printed on them, nothing works, it simply will not recognize disc and I'm stuck? Any help from anyone?

  I'm sure that's not material that are bad, because I had an old windows XP disk, and after that I tried everything, I tried to install on the computer and everything was fine, but I would like to have windows 7 as the computer came with...

  Regards Allan Thomsen

  Hello

  Very strange boyfriend
  Would it be possible that the CD/DVD drive is unable to read the first disc correctly?
  I mean, maybe it's a disk problem and not the problem with the data

  I don't know what's wrong here, but you have some a lot of m options here:
  To recover the laptop, you must use the Toshiba recovery disks or HARD drive recovery
  You can use the HARD drive recovery process?
  Turn on the device, press F8, choose fix my computer-> drive HARD recovery.

  If this is not possible? Well. You can always order a new disc here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• Vista recovery disk does not work

  my recovery for a6057c disk will not work after that I used the NeoSmart
  recovery disk.

  After logon to Vista I see that empty office, I can access the task
  Manager by CTRL - ALT_DEL.manager.

  Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
  I just want to make a disaster Recovery and
  all over again with new factory. Does anyone have any ideas?

  I now remove the prtition C on my drive.

  Vista still labels the d drive, I have no C?

  I found the answer on the Microsoft Knowledge Base.

  Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

  The article is also for Vista.

  Article ID: 223188 How to restore the drive letter of the system / boot in Windows

  Would do the same thing.

  I took the article to use regedit to swap my C & D return records.

  Now windows Vista starts OK. (All I had before was just an empty office).

  I also received my HP Factory disaster recovery disks it looks they will work if I need.

• Satellite P10-304: 2nd recovery disk does not work

  I'm selling my laptop.

  Went to use recovery of original product CD provided along with the PC.

  1 disc worked OK - unfortunately 2nd disc (undamaged) stops at about 60 percent and gives the following message;

  error number 437
  Can not read the file
  version: 7,00 (Apr 2001 19, build 254).
  License: XQ199905
  command line arguments: - clone, mode is pload, srx = x: \01367000.GHO:1, dst = 1:1 - batch

  PROG mode: prog_local
  Name of the path:
  dump file: x:\01367001.GHS
  dumpPos: 0
  flagexplode: 10

  State of IRQ of mouse: no IRQ (0)

  Help, please!?!

  I have a buyer waiting and everything seems to be Dutch!

  Hello

  It's not easy to say what's wrong with the 2nd recovery disk.
  I would recommend formatting the HARD drive completely and try again to recover the operating system. If it doesn't work, well try to contact Toshiba. Here, you can order the recovery CD. Maybe the problem of recovery will be solved as a gesture of goodwill.
  Nevertheless, the recovery cd is not expensive.

• Toshiba Satellite Pro T130 w / Windows 7 Home Ed - Dynadock U10 does not

  Any help is appreciated here.

  Recently purchased a new Toshiba Satellite Pro T130 laptop and a Toshiba Dynadock U10. Laptop has Windows 7 Home Edition is installed.

  Want to Toshiba to bind in Dynadock for wired keyboard, VGA screen, mouse. Installed software Dynadock and get and 'incompatible pilot' error no message - no indication of which, although. Computer laptop seems to be docked, however impossible to get VGA to work.

  I tried to install on a Lenova Thinkpad with Windows XP and it works fine with this, but not her own brand of Toshiba?

  Thank you

  Have you used the latest version of the software ""?
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 29 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 29 & driverLanguage = 42]-W7 32
  and for 64 bit
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 30 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 30 & driverLanguage = 42]

• Satellite C670D - 11K - Toshiba recovery disks does not work

  I tried to recover the Satellite C670D - 11K using new factory system recovery disks provided by Toshiba. Both drives do their thing until the end when I get these messages:

  Files\mcafee\virusscan/dat\000.0\avvscan.dot c/program Error (error = 1117)
  Error restoring image
  request could not be performed due to the i/o device error
  Error image x could not apply for win 7 V:\\HDDRecovery\SWIMG\15434XSP. Water rain Index 2 in c HARD drive management

  Only option after this point is to press a button any and I get the white screen Toshiba

  When I turn on the laptop I get message "boot mgr is missing." I tried the disc of recovery a couple of times since and things don't get any better. In fact I just get a black screen with cursor after

  Suggestions this is appreciated please? I was thinking of buying the recovery disks would be a solution simple but should I give in and go to a professional now?

  Thanks, Paul

  I assume you are using recovery discs that you created using Toshiba recovery disc creator tool, right?
  It seems silly now, but something went wrong and I m afraid recovery disks are now useless. It turns out that you can't change anything or force the cell to the recovery image installs successfully.

  The only thing you can try is - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
  I don't think this will help, but you can test it in any case.

  Now, you have two options:
  -for the restore disc original order from Toshiba
  -install the clean version of the OS by using the Microsoft installation disc

• Windows Vista Home Premium System Restore does not work

  I didn't my laptop another year.  But whenever Vista does not turn right... too slow or what not I try and create a restore date to solve these problems, but whenever I do it always returns he tells me, "that system restore could not completely finished, so your files have not changed."   I'm so tired of NOT being able to fix my computer and it works fine!  Can someone please help?

  "But every time that Vista does not turn right. too slow or what not I try and create a restore date to repair these... »

  You can't do a restore point for the last week, today.

  You can do a Restore Point for today, so that next week, if necessary, you can restore to today.

  Think about it: How can you make a Point of restoration today something happened in the past.

  You should have in the past, if space allowed in SR, to come back to today.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner