Toshiba Satellite Pro M30 cannot use USB 2.0

Similar Questions

• Toshiba satellite pro m30 USB problem

  I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

  Hello

  could you describe the difference between the original USB cable and the USB extension cable?

  The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

  To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

  Also, you could test whether USB, the same problem occurs with other cables.

  Bye Bob

• Toshiba Satellite Pro M30 & Power Saver stop error

  Hello!

  I am struggling with this problem for months... the latest version of Eve on my toshiba satellite pro m30 running windows xp with service pack 1 installed gives a message box with an error message when the stop and I'm unable to eliminate this error. Unfortunately, I can't consider reinstall the system from scratch, because there are many other applications installed and I can't lose the settings for them. I read the forums and realized I'm not one of the problems with toshiba power saver. I'm even lucky to successfully at startup started it! Yet, it hangs at shutdown. It's pretty boring. also, I downloaded all the latest updates of this site for my laptop, including even the bios update.

  I would like the opportunity to be able to download the version without toshiba this site energy saving bug, and I'm sure many other people would appreciate the patch too!

  any comment on that?

  Andrew.

  Hello

  If your laptop is installed correctly it should work well. All the software has been tested. The only reason for your problem may be additional software that you have installed later.

  It is also possible that it may be caused by an Antivirus application. Maybe an application runs in the background? There are many reasons that may be responsible for this problem.

  If you reinstall your Notebook of recovery CD it will not work properly. It is very unjustifiable to write on some versions bug-free. I sometimes have problems with BONES, but almost always after using some freeware.

  Good bye

• Satellite Pro M30 - cannot install audio driver

  Hello

  I have a Satellite Pro M30 which usaed work properly but I can install more drivers sound card is on.

  I think it happened because we have reinstalled windows XP Pro with SP2, but may not be some.
  He is installing drivers Sigmatel AVC97 and comes up with the following error.

  Parameter invalid operating system or this installer does not support this operating system

  Any suggestions because it does appear that a driver for the family of SPM30.

  Hello

  Try to install the driver using another medium facility.
  To DO this in the Device Manager.
  Mark the sound card and use the option to update the driver.
  Then, use the advanced option and indicate the location where the driver audio was stored on the HARD drive.

  Please note; You must decompress the audio driver package before installing

• Satellite Pro M30 and start USB HDD

  Hello everyone.

  Is it possible for a Satellite Pro M30 (Bios version 1.70) to boot via USB HDD?

  Thank you
  Vittorio

  Hello

  No, the upgrade of the BIOS will change any possibility of starting.

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite Pro M30: Failure using Recovery CD - machine wrong

  I tried to recover my M30 Pro of the Satellite with a product recovery CD, which came with the laptop, but it gives out it's a bad machine and the software is designed for Toshiba PCs, even if I used it successfully once before.

  Hello

  Normally, something like that can't happen. This error occurs if the string DMI and the label on the image n t game. Is that what you did your laptop for repair?

• Re: Satellite Pro M30: cannot enter hibernation mode or standby

  I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
  Now I can not access the 'characteristics of hibernation or standby.
  In addition, shortcut keys are inop.

  When I go to programs, utilities Toshiba the only option available is SD memory card format.
  I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.

  Can anyone help me with any of them?

  Hello

  For me, it looks like you don't have Toshiba drivers all installed and necessary.
  Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?

  Please note that the common Module are very important!
  You must install this software first!
  The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!

  On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
  Follow m this and I sure will get you everything works again!

• Satellite Pro M30: Cannot write - DVD SD-R6112

  I have a M30 Satellite with a Player Pro combined DVD - ROM SD-R6112 DVD. The drive is marked as "DVD-R/RW. It will play the DVD without problem, but it will not recognize any blank DVD - RW disc. I've used Nero6 and RecordNow Delux.

  The drive is incorrectly marked? If anyone has had problems similar and, more important still, to find a solution?

  Hi Geoff,

  Your device works properly if you use DVD-R discs? I tried mine using a DVD - RW once and it would not accept the disk until I had formatted (using NERO).
  Using DVD - R blanks I had no problem at all.

  HTH

• Satellite Pro U200: Cannot use TABLET TACTILE power utility

  Hi guys, help me please.

  My computer gives me this error message "'THotKey' recovery failed. "Error code: 0 x 00031402, 0x00000002" and with it, I can't use my Fn key and when I try to open the folder of toshiba, it gives me the same message.

  Could you please help.

  Thank you

  Maiko

  Hello Maiko

  It will be interesting to know since when this error occurs. Try to roll back OS to an earlier time using System Restore tool. Maybe after that that the problem will be solved. If this isn't the case, please post again.

  One last thing: you can also try to install common modules again. You can find it on the download page of Toshiba.

• Satellite Pro M30: Cannot read DVD on DVD - RW disc

  I have can´t dvd´s read...
  I can burn but when I start to read, it shows me an error like this "E:\ is not accessible. The request cannot be performed because of an i/o device error."

  It s killing me, please help

  Hello

  The IO device error occurs if the drive has a problem with the disc or the configuration of your system (mainly a problem of disc).
  Peut-t DVD player play all DVD or just DVD serious?
  What burning software did you use?
  As far as I know, you should always logged out of engraving.

  Also if you need the DVD Shrink software please check this link:
  http://forums.Afterdawn.com/thread_view.cfm/192015
  http://forums.Afterdawn.com/thread_view.cfm/244972

  http://Forum.Digital-Digest.com/archive/index.php/t-45081.html

  Good bye

• Satellite Pro L300 - cannot use Intel ProSet WLan tool with Win XP

  Hello! I have the same problem. I installed a XP SP3 and I can't use the * Fn + F8 * hotkey to activate the WLAN function on or off. Other Fn keys work correctly. The WiFi network also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work. It seems "no wlan driver installed. The card is a Realtek 8187 B, downloaded the driver on Toshiba support original site. What can I do?

  > WLan also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work
  If the WiFi works fine using the windows zero configuration then the WLan adapter is enabled and don t get the FN + F8.

  The fact is that your 3rd party WLan configuration tool doesn t work because your wireless network card is * Realtek! *

  Intel ProSet ONLY works with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have an Atheros Wlan card.

  You have Realtek so use windows own zero configuration WLan!

• Satellite Pro M30 - cannot burn CD/DVDs

  Hello!

  Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).

  Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
  Nero version: 6.6.0.1
  Recorder: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected: ATAPI
  CD-ROM: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ-820 s D: CDRom0
  Generic DVD-ROM E: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 74448896 (0) byte
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 510 MB (523184 KB)
  Free physical memory: 228MB (233560kB)
  Memory in use: 55%
  QUERIES PFiles: 0x0
  Static write speed table: 0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2004
  CD-ROM (ISO)
  14:02:51 #1 text 0 file Isodoc.cpp, line 6165
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  14:02:51 text 0 file Burncd.cpp, line 2832 #2
  CARPET * A DVD - RAM UJ-820 S
  Protection against the imbedding of buffer enabled

  14:02:51 #3 text 0 file Reader.cpp, line 127
  Player running

  14:02:51 #4 text 0 file Writer.cpp, line 122
  Writer MATT * A DVD-RAM UJ-820 s running

  14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
  First address writeable = 0 (0x00000000)

  14:02:51 #6 text 0 file Burncd.cpp, line 3117
  Turn on Track-at-once, using CD-R/RW media

  14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
  Last possible write address on media: 359845 (79:59.70)
  Last address to be written: 51106 (11:23.31)

  14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
  Write in overburning mode: No. (enabled: CD)

  14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
  Recorder: MAST * a DVD-RAM UJ-820 s;
  CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
  ATIP data:
  Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
  Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

  14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
  > Protocol of DlgWaitCD activities:
  =========================================

  14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 51107 (51107) original disc POS = #51107 / 11:21.32
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
  --------------------------------------------------------------

  14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
  Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
  -150 | Lead-in | 0 | 0x00 | 0x41
  -150 | 1. 0 | 0x00 | 0x41
  0 | 1. 1. 0x00 | 0x41
  51107 | Lead-out | 1. 0x00 | 0x41

  14:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
  Removed 2 blocks from end of track 1. Length: 51107-> 51105.

  14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
  Caching of files started

  14:02:52 #15 text 0 file Burncd.cpp, line 4003
  Cache writing successful.

  14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
  Caching of files completed

  14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
  Burn process started at 16 x (2 400 KB/s)

  14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  14:02:52 #19 text 0 file Mmc.cpp, line 20673
  Set BUFE: Protection against embedding of stamp-> ON

  14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
  SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
  Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:11 #21 CDR-1106 file Writer.cpp, line 311
  Power calibration error

  14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
  all writers idle, stopping conversion

  14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
  conversion idle, stopping reader

  14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  CARPET * A DVD - RAM UJ-820S\H1 T0

  14:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  14:03:12 #26 text 0 file Mmc.cpp, line 15477
  start closing a Session

  14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
  SCSI Exec, HA 1, YOU 0, LUN 0
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
  Power calibration error

  14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  14:03:12 #30 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
  Set remaining time: 0:00,000 (0ms)-> OK

  14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
  Burn process failed at 16 x (2 400 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
  File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Here's how I just fixed my misfortunes:

  In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.

  Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.

  (1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".

  (2) to ensure a hard reboot (power off)

  (3) Windows to automatically detect any material it appears after reboot begins

  (4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
  b change of "Ultra DMA mode" "PIO" mode only

  (5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "

  (5) - hard reboot again

  (6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.

  It should then work.

• Toshiba Satellite Pro 4600; Cannot load Windows.

  A friend recently gave me a refurbished from this laptop model that has been updated with Windows XP Pro and it worked for about a month before a windows system file has been altered. I got a new OS disk and I replaced the file and it worked fine for another month, and when I started it today, it gave me a message saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "and gives me a list of options to reboot. I have not installed anything or nothing changed.

  I also tried each of the options and none work. I get a blue screen that flashes for a split second and then he returned to the screen with the restart options.

  I tried to go to the BIOS menu and setting up for her to start from the cd drive with the OS disk instead of try to reformat and I get a screen with a short message that says ' Media Test Failure. Check cable"and then returns to the screen with the with the restart options. I'm running out of ideas and anything online that I could find so far has helped. If anyone has any ideas at all, I'd like to hear them.

  I want to reformat completely this laptop if it is not too late.

  Any help would be appreciated. Thank you very much.

  Joy

  Hello

  Media Test failure. Check cable message appears because cell phone trying to boot from LAN.
  Maybe the laptop trying to boot from LAN because the HARD drive is no longer available it could be possible
  Have you checked the HARD drive in the BIOS? Please do!
  Check if the HARD disk is available in the BIOS
  If it s not appear not in the BIOS, then the disk HARD is dead and must be replaced.

  PS; You can also change the order start F12 press when the laptop starts upward. Then all the possible boot devices should appear on the screen and you can choose the CD/DVD drive as the boot source.