Toshiba SD-R2512 1320 version firmware?

Similar Questions

• Toshiba 40L7335D - various issues after firmware update

  Hi all,

  I bought a Toshiba 40L7335D, serial number 70T04380.Tv was working perfect until the last firmware update. No, I have problem.
  When I reproduce any movie in 3d or 3d demo, I have bad reproduction. Picture is blurry and a bit blurry. It was a perfect image before update. And I have this problem only when I reproduce 3d movies/demo, I don't have this problem in menu or when I play normal movies (in 3d).
  I tried the two glasses I ask my friends to see the problem and each of them felt same question.
  My firmware is 7.1.92.61.01.1

  How can I reset firmware firmware to factory, cos it was perfect for me. Or how can I solve this problem with this firmware?

  Thank you in advance.

  Originally posted by Cimii
  

  Hi all,

  I bought a Toshiba 40L7335D, serial number 70T04380.Tv was working perfect until the last firmware update. No, I have problem.
  When I reproduce any movie in 3d or 3d demo, I have bad reproduction. Picture is blurry and a bit blurry. It was a perfect image before update. And I have this problem only when I reproduce 3d movies/demo, I don't have this problem in menu or when I play normal movies (in 3d).
  I tried the two glasses I ask my friends to see the problem and each of them felt same question.
  My firmware is 7.1.92.61.01.1

  How can I reset firmware firmware to factory, cos it was perfect for me. Or how can I solve this problem with this firmware?

  Thank you in advance.

  What version of Firmware were you using before? Although, that would NOT (!) no difference in terms of performance 3D-picture.
  None of the FW which were published in the history of this model, version had a report any upgrades of the 3D image.

  So when you say, that the previous version of SW obtained the best results, there is no reason objective for this hypothesis. Please be aware of this.

• Toshiba 46TL838 - I need new firmware

  Hello

  TV: 46TL838
  6.0.08.1 worm.
  IM from Poland - Polish version /.

  My TV does not have to update the menu. IM connecting to the ethernet LAN

  I need minimum 6.4 version because in my sweet 3D option does not work on the USB key.

  I can guarantee to the tv and I have to take it to service support but I have a long way to the service.

  I'm surprised that there is no firmware on the Toshiba site. I was disappointed.

  Please help me.

  Hello
  Especially the firmware for all Toshiba TV European models can be downloaded from the Toshiba page
  http://www.Toshiba-OM.NET/firmware.php

  But for the two sets of series RL838/858 and TL838/868, you will need to use one of the following methods:

  * Method 1: *.
  _Automatic network warning

  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning

  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

• Is - this Toshiba delievers a light version of restore CD?

  Toshiba gave 'light' for series A100 restore CD? I mean the Cd just restore Windows XP MCE and without other software and drivers (Norton, wifi soft, ect...)

  No, I don't think so. The restore CD contains all drivers Toshiba, tools and additional software and it AFAIK only one version of this recovery CD will be delivered with the laptops.

  But there is another way to create a slight recovery CD. The original recovery CD Toshiba copy the i386 to the HARD disk folder. This is important for creating own Windows boot CD.
  The application nLite freeware is very useful and allows you to create those Boot CD Windows

  Check it!

• Toshiba STOR. E TV + firmware update

  Hello

  Y at - it any update of unofficial firmware for the STOR. E TV + series of products? I see clearly that there is no upgrade official firmware...

  One delivered with the product resembles "work in progress" (you can see this throughout the entire user interface, which is awkward and very "90 years", but especially if you access the device using your browser - although this could be useful if your calculation is rusty and need a little help to add base :)).

  In addition, despite the fact that the product is on the market for more than a year now, there is no update firmware (despite the obvious need for a). I sometimes wonder where the release date would have been if the time of the product on the market would have been extended in order to have a fully functional product right out!

  Developers of Toshiba @: If you don't bother to release a firmware at least give the code "as what" to the community. This way you will definitely find someone willing (out of pure passion) all you had to do (for the money you make as developers, part of those we pay for this product as customers).

  Thank you.

  STOR. E TV +?
  I feel betrayed

  :(

• Toshiba Camileo H20 - slow focus - firmware needed

  Hello

  As I read on the internet there are many users who complain about the development slow on this point, as the Toshiba says 'top model' of the Camileo series.
  The focus is extremely slow. I and other users like to see a firmware that corrects this problem for the H20.
  Do you agree? That respond to this topic, while Toshiba contributes to their customers!

  William

  Boost of my BMW is not so powerful and fast as I waited
  A new powerful engine with boost would be better
  Do you agree?

  Maybe I should start a thread in internet and BMW would release something like new cheap for engine or replacing the entire engine to improve performance...

• Toshiba 46TL938 can't update firmware

  I got a message that a new firmware is available.
  When I press Ok to continue, television plays the channel normally but does not respond when I press any key on the remote control.

  I expect more than an hour, but nothing happens.
  Then I unplagged the tv and when he if turn on again, I saw the old firmware to the system.
  I tried once more and I had the same problem.

  I'm doing something wrong or there is a problem?
  Please describe step by step valuation process to confirm I don't hurt.

  It is by TL series problem
  1-reset the TV menu - Configuration - System
  2 - go through the Setup again, then go to SW update it will work 100%

• Why updates Apple version firmware 2012(2nd gen) Airport Express

  The last update was 2 years 7.6.4. Why Apple has not added all the features of the last Terminal Airport Express

  Unfortunately, nobody here can answer for Apple or tell you "why" they do something or not do something... we're all users, just like you.

  If you want to see a new feature on an AirPort Express Terminal, or new features on a new model, you can inform Apple. Click on the link just below for this purpose. Will acknowledge receipt of your comments, they will not respond after that.

  Apple - AirPort Express - Feedback

• Toshiba 40SL733 - current version of the firmware?

  Hello

  I have a Toshiba 40SL733 with FW version 27.4.2010 10.1.41.4 30 16:06:46. What is the real version for my TV? If this isn't the case - where can I get the current version and how do I get the update?

  Thank you very much!!!

  CU
  Daggi4us

  Firmware for Toshiba released in European TVs can be downloaded from this page:
  http://www.Toshiba-OM.NET/firmware.php

  Now, you can find the firmware:

  v10.1.41.9 40SL733F (France) for
  v10.1.59.5 for 40SL733B (UK & Ireland)
  v10.1.59.6 for 40SL733G (for all other EU countries)

• Old Firmware for Toshiba 37XV743G 10.3.57.13

  Hi all

  My parents have a Toshiba 37XV743G with current downloadable firmware 10.3.57.12.
  On many pages on the net, I can read about firmware 10.3.57.13 which was inconspicuous and helped many users with this TV.
  But... I can't find anywhere.

  Can anyone help?
  Can I get a link or a ZIP?

  Help, please.

  Thank you and best regards

  Mücke

  What problem do you have with this model so that you need a SW update?

• WRT54G (version 2) Firmware Version Question

  Hello

  Beautiful room here. I'm glad that this facility exists.

  I have the router WRT54G version 2. Finally, I upgraded the version of firmware years before Cisco Linksys bought.

  A recent announcement by the people of Black Hat (treaties in this article of TechSpot) about their intention to publish a validation tool to exploit a vulnerability of DNS rebinding on a great many routers SOHO forced me to check for the latest update of firmware for my router.

  The interesting thing is that my router's Web interface lists the current version of the firmware as 4.30.12, but the latest version of the downloadable firmware that I see listed on the support site is 4.21.1. I'm not very surprised by this apparent anomaly. If I remember correctly, that firmware version 4.30.12 download is a beta that was supposed to fix a problem connecting WiFi to a certain type. If this version of the firmware was still considered a beta at the time of the acquisition of Linksys by Cisco - or a 'stable' later firmware version incorporating the same or better fixes for the issues addressed by 4.30.12 that had been produced at that time-so maybe 4.30.12 was ruled out.

  If you read the article of TechSpot and the associated table of preliminary vulnerability, test reports, you'll see that router WRT54G version 2 is not specifically listed. Version 3 of the router is listed as vulnerable, and version 5 of the router is not.

  So, my questions are:

  Everyone here is aware of information indicating whether or not the problem of DNS Rebinding vulnerability affects the WRT54G version 2 with the last registered (4.21.1) router firmware version?

  If so, does anyone know if yes or no Cisco plans to release an update for this old router?

  If the router is vulnerable and will not be solved with a firmware update I'll probably have myself a new LInksys router which is not listed as vulnerable. (Believe me, I'm not leaving this thread to bash Linksys. This router ran like a train of 24 hours a day for years without a single hiccup that was not directly attributable to the problems of the ISP. For the price, it's one of the best purchases of equipment I've ever done calculation. And I have done this since the beginning of the 80s when I was using a CP/M system and an Apple / / e.)

  If the 4.21.1 version firmware for WRT54G version 2 is not affected, I wonder if anyone knows if yes or no 'downgrading' of 4.30.12 to 4.21.1 is likely to lead to a failure of the router. (I'll probably try it anyway. If it brick the router I'll just go ahead and get a new one.)

  BTW, I use this router with the ease of remote administration and UPnP off and strong admin password that is changed each week. (When I always used wireless I used WPA2 AES with strong password, but I am all wired now with the systems running Debian testing).

  Forgive me for talking to myself. I decided to just go ahead and "downgrade" of the 4.30.12 firmware 4.21.1 version - just because I prefer to use a version of firmware known and supported for this material. The downgrade has gone well, so no worries about this.

  I'll look for news on whether or not this version of the firmware on this particular router is vulnerable to the flaw in DNS rebinding and acts accordingly.

  Sorry for the noise.

• Early firmware version?

  Hello

  There were no firmware released General for the NSA2400 since 2014 but I was informed of a new (fourth) early release (5.9.1.6 - 5). Is the beta release early and we we intend to execute? When it becomes public?

  Thank you

  Hello

  5.9.1.6 - 5o is an early version firmware which is already web published. It is recommended to go through the release notes for the firmware before deciding to upgrade to it. This will give you an idea if anyone of you are existing problems (if any) are fixed in the release.

  Unfortunately, we don't have any ETA on a general release in series 5.9.X.X.

  #IWork4Dell

• Store TV + firmware and Samba

  Since there doesn't seem to be much interest at Toshiba to straighten their firmware that I looked for other options. In another post, I found that the Stor.e TV + and Noontec V8S are basically the same. I've studied this and this seemed to be the case.

  OK, so I took the risk and updated the firmware of my Stor.e TV + Noontec V8S latest firmware website noontec V3.0816.13_V8S.

  The update went well without a hitch (took about 2 minutes of an old drive flash 256 MB connected to the back of the USB port on the unit, because I formatted before using it) and some of the irritating downsides of the Toshiba firmware has been resolved. Samba has worked in some way, but I was still not able to download songs directly on the Stor.e more wireless, which is the only other feature I need currently. The irritating remote control buttons were replaced by how any sane person could use them (I had changed my universal remote control to correct this, will have to change the settings if I kept the updated firmware) the new firmware seems solid, but I do not USE THE CAPABLITIES VIDEO, so I can't comment on that.

  A major drawback of this update for me, it's the small screen of the device to become much less readable. Looks like there is a problem with the police on the new firmware. I use my Stor.e only as a music player flac, and since I don't have it connected to a TV the small screen is essential for me to select tracks or discs. I have 300 + discs, the Stor.e is an excellent cheap media player, which connect me to my STEREO through a DAC system.

  I therefore had to change to the firmware of Toshiba to correct this display problem and stopped trying to get sorted Samba. Looks like I'd still use USB to download music to the Stor.e when I buy the new CD. What a pity.

  Either by the way, the new firmware of Toshiba is very similar to the old firmware, in what is lacking the possibility to start the Samba. In the readme file, Toshiba says that the new firmware corrects a problem with the network, but I think it's probably the smallest issue that most users have with the firmware of Toshiba.

  UPDATE:
  After some research, I learned that the MVix Ultio is just like the Noontec player, and some users flashed their Noontecs for the MVix firmware successfully. It was much less obvious if the Mvix and Toshiba are the same, the MVix photos different from the Stor.e, but I decided to give it a try anyway.

  So I have the TV Stor.e + updated the latest MVix Ultio (downloaded from the site Web Mvix) 3.12 firmware. Note that it is the standard Ultio, NOT the pro. Also note that with this version you don't have to (and in fact will not be able to) install the drivers of Samba and separate bitTorrent, as stated in the manual. These seem to be only for the Ultio pro and are already included in the standard firmware Ultio.

  This solved all my problems with Samba, and the display with the Noontec firmware problem does not exist with the Mvix firmware. A whim, I noticed with this version of firmware is when I try to open the visit from the Samba browser neighbor he sees not all hard disks. Seems to be a disk formatting question (I formatted the disc via the menu Store) I can see readers on my other Stor.e TV +. I know that Samba still works however, as I can access my Stor.E in exploring through a wireless router (it appears as Venus under Network on Windows 8).

  As I said previously, I use my Stor.e to play .flac files only, so cannot comment if the Mvix firmware has problems with playing other files or formats. I do not think that there will be major problems, even if, as it seems Mvix regularly update their firmware to fix any problems (NOT like Toshiba!)

  If my suggestion to those who want to get the firmware updated for their Toshiba Store TV + is to go for the MVix 3.12 firmware. He can still back up the firmware update from Toshiba (downloadable from their site) if there are problems.

  You do this at your own risk, however, if brick you your unit don't blame me...

• Impossible to find support for Toshiba 32VL733

  Where is the support for toshiba 32vl733?

  This model doesn t exist on your site. When you put a new firmware? To solve the problem as: youtube dosen t work either, put a new firmware for supported more formats like the mkv, blu ray with subtitles... etc.

  Hope solve you problems if you want to buy toshiba products in the future, and if you want to be recommending!

  As far as I know you can find the new firmware on this Toshiba consumer portal
  https://portalcp.toshiba-tro.de/welcome

  Firmware v10.1.59.6 seems to be the latest for the Toshiba 32VL733G

  I not very well what version of the Youtube website, your used TV but some devices used the YouTube XL Mr. after 9 June 2013, Google will end for youtube.com/xl and to cause that youtube does not work for some series.
  https://support.Google.com/YouTube/answer/3123170?hl=en

  Not sure if this might help you but try to use the Youtube through the browser using this link: https://www.youtube.com/tv#/browse

• Re: My Satellite M70-165 is unknown in the Toshiba site

  I need support (drivers and instruction) for reinialize my laptop, but it is unclear in the toshiba Web site. Why is that?

  Toshiba PcDiag report:
  Data-2012/01/03 08:06

  [Information sul PC]
  Model Satellite M70
  Number parte PSM70E-01100JIT
  Number of series Z5265264K
  Version operating system Microsoft Windows XP Home Edition 5.1.2600 Service Pack 2
  Version BIOS V1.10
  Processor CPU Intel (r) Pentium (r) M 1.73GHz
  Memoria fisica 2048MB RAM
  Ability disco rigído 80,031,974,400 [bytes] 74.536 [GB]
  Ability spazio libero su disco rigido11, 920, 052, 224 [bytes] 11.101 [GB]
  Video Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family version is 6.14.10.4363
  Risoluzione screen 1280 x 800 pixels
  Color True Color (32 bit)
  Audio Realtek AC97 Audio version = 5.10.0.5870
  Rete Realtek RTL8139/810 x Family Fast Ethernet NIC version = 5.621.304.2005 address MAC = 00:0F:B0:A7:7E:DF
  Intel (r) PRO/Wireless 2200BG Network Connection = 9.0.2.25 address MAC version = 00:01:02:03:04:05
  Modem software Modem TOSHIBA version = 2.1.51.0
  Device IDE 1 MAST * A DVD-RAM UJ - 841 S version firmware = 1.50
  Device IDE 2 (nobody)
  Device IDE 3 HTS541080G9SA00
  Device IDE 4 (nobody)
  Device IDE 5 (nobody)
  Device ELBY CLONEDRIVE 1.4 6 IDE
  Internet Explorer 7.0.5730.11

  EC/KBC Version «»
  PS-MICOM Version «»

  > I need support (drivers and instruction) for reinialize my laptop, but it is unclear in the toshiba Web site. Why is that?
  It is not possible. Do you know why?
  You cannot search for laptop using the M70-165 model name. On the Toshiba download page, it is listed by model number. Your Satellite M70-165 a PSM70E part number so please use it for identification of laptop on the download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Older models are listed in the option ARCHIVE.

  Please check again.