Toshiba Software by disabling the automatic Wireless Configuration Service

Similar Questions

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• I can't connect to my router and my system XP Pro/SP3 has NOT installed the automatic Wireless Configuration service. How can I get that re-installed?

  I have the latest driver for my Linksys WPC54GS PCMCIA card. The Linksys software does not support WPA security, which supports my rout (and I do not want to use WEP).  The zero wireless Configurator, this is what I need, but the service is not installed on my Windows XP Pro w / SP3 System.

  Hello

  You need not be. I posted a link to google cache, so keep scrolling down, the answers are displayed below. It contains details on the manual creation of the registry key for the zero configuration service.

  You can also export to a working system.

  See you soon.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• How can I disable the automatic IP Configuration in Windows 7?

  Is someone can you please tell me how to disable the automatic IP Configuration in Windows 7?  I am happy to change the registry to implement if necessary.

  Why?

  Because my PC sometimes gives an IP address like 169.254.0.1.  This is because Windows has detected that your computer is connected to a network, but the PC has not yet given an IP address by DHCP on the network, so Windows Server the automatic IP Configuration comes in and gives the PC an IP address that starts with 16.254.

  The reason why that the DHCP server on the network has not given an IP address was because the network is coming a few seconds before the DHCP server comes up, and the automatic IP Configuration Windows comes too quickly.

  Of course, once the PC has an IP starting 169.254, he cannot communicate with my router that has an IP address that starts with 192.168.  The only cure, outside re-booting, is to issue the ipconfig/renew command to obtain an IP address from the router DHCP server.

  If I can turn off the automatic IP Configuration of Windows (I could disable in XP) then I can avoid this error.

  One option that you have.

  You can set the IP address to a static IP address.

  Reach:
  Beginning
  Control Panel
  Network and Internet
  Network and sharing Center

  Click on connection to the Local network (a separate dialog box opens Local Area Connectin status)
  Click on Properties (opens the dialog)
  Click on Internet Protocol Version 4 (TCP/IPv4)
  Click on Properties

  On the general tab, move the radio button to use the following IP address:
  Here you can set the IP address that you want to use the machine.

  Example of Configuration:
  192.168.0.254
  255.255.255.0
  192.168.0.1

  You will need to note the IP DNS addresses you need more.
  If you like you can even use a set of public DNS servers for free. http://www.online-tech-tips.com/cool-websites/free-DNS-server/

  Please note that the sample configuration assumes routers IP is 192.168.0.1, check please. :)

  Good luck

• WRT54G wireless did not cooperate with the automatic Wireless Configuration

  Hello! I wonder if anyone can help me spot the problems I have here: for a while it was not too much a problem, but whenever I try to view the list of wireless networks, it gives the "Windows cannot configure this wireless connection. If you have enabled another program to manage this wireless connection, use that software. "I went in to find records WZC served and I unchecked/checked the option again to make sure it wasn't a source of the problem. Yet whenever I open the "Wireless network connection status" window I only gave 2 options on the tab. The general tab and the Support tab. The third tab is missing, one that would allow me to check the option to let Windows configure my wireless but I can't seem to be able to bring this tab back anything. Any help is appreciated a lot everyone, please and thank you!

  That's the answer. It's something with XP that requires more troubleshooting. If other computers can connect, the router should be fine.

  In any case, can you check the manufacturer's website if they have an updated driver for your wireless network card?

• I disabled the automatic updates and it starts to turn itself on, W H Y?

  "WINDOWS XP HOME SP2 '!

  I have disabled the automatic update and it starts itself to spin, WHY?

  HOW DO I KILL IT?

  I want all the crud that microsoft that will come to me.

  Hi Gail,

   

  You run the computer as an administrator?

  Method 1: You can run the fixit available in the article below from the off-ramp of Windows Update and then check if it makes a difference

  How to configure and use automatic updates in Windows

  http://support.Microsoft.com/kb/306525

  Method 2: You can see the steps outlined in the article below

   

  How do I turn off the Windows Update feature in Windows XP

  http://support.Microsoft.com/kb/892894

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Note: It is not recommended to disable Windows Update, automatic update, you do not have to search for updates online or worry that critical fixes for Windows might be missing from your computer. Windows automatically checks for updates for your computer.

• Disable the automatic generation of folder.jpg

  I have a couple of music files that already have incorporated album covers, but that do not contain the album cover itself in this same folder where the music file. Whenever I try to add music for collections such as the Zune software, it automatically generates a folder.jpg file. However, when I try to integrate album art on a music file using freeware like Mp3Tag and add it to my collection in the Zune collection, no folder.jpg file is generated automatically in the file where is the music file. Is it possible to disable the automatic generation of folder.jpg?

  Any help is appreciated.

  I have a couple of music files that already have incorporated album covers, but that do not contain the album cover itself in this same folder where the music file. Whenever I try to add music for collections such as the Zune software, it automatically generates a folder.jpg file. However, when I try to integrate album art on a music file using freeware like Mp3Tag and add it to my collection in the Zune collection, no folder.jpg file is generated automatically in the file where is the music file. Is it possible to disable the automatic generation of folder.jpg?

  Any help is appreciated.

  ==================================
  I am not sure that it is, but you can place
  all .jpg image in any folder and rename it Folder.jpg
  and it will be displayed on the folder when thumbnails
  display is selected...
  John Inzer - MS - MVP - digital media experience

• I have disabled the automatic update, but it will however update! How to disable?

  I use version 34 and I don't want to update becase the plugins work correctly with the newer versions. I disabled the automatic updates check in preferences, but updates of firefox sometimes! It makes me very angry, I'm tired to restore my backups. What should I do to prevent the automatic update forever! I'll be able to update the program if I need!

  Mozilla Maintenance Service can be updated Firefox for you. Disabling updates of Firefox does not stop this 'service' to make updates.
  https://support.Mozilla.org/en-us/KB/what-Mozilla-maintenance-service

• How can I disable the automatic renewal of an app?

  How can I disable the automatic renewal of an application I bought?

  Applications on the MAc App Store are a time purchase only. There is no renewal.

  The app offers a renewable subscription to certain services with inside, if that is managed through the application Web site if the subscription has been activated it, or can be managed inside your Apple if that was used to activate the subscription ID.

  View, change or cancel your subscription - Apple Support

• How can I disable the automatic connection on Ubuntu OS Netbook

  During initialization of the machine AUTO LOGIN has been already highlighted.
  Unfortunately I only noticed that I hit the next key.

  How can I disable the automatic connection?

  I think I change the etc/gdm/gdm.conf, but would like confirmation that there is a slightly different version of Linux.

  malcolli

  Decided to give the full answer on this point Ubuntu system and it works fine.
  In a terminal, run the command: sudo/usr/sbin/gdmsetup

  This will bring up the gdm gui and there you can disable auto login and the login timed.

  malcolli

• Disable the automatic reactivation after opening of the screen

  Hello

  is it possible to disable the automatic reactivation after the idle state by opening the screen? If so, how?

  Greetings
  Mr. Auer

  Hi, Matthias

  When the laptop is in sleep or Hibernate mode after the opening of the screen for laptop wakes up automatically and display will be automatically ON.

• Disable the automatic backup in Apple applications

  How can I disable the automatic backup in the Script Editor and other Apple applications?

  I love how the captain tells us what is good for us and allows us no easy way to change things.

  AutoSave/Versions has been part of Mac OS X Lion. See these instructions. Save As will be in its normal position in all applications, and when you close the documents, you will be asked if you want to return (same result as the old do not save).

  Versions and AutoSave will always run in background for the applications that use it. You can't really turn off without disrupting some application menus, but it's been at least OS X behave more like Snow Leopard or earlier version.