Toshiba software conflicts with Microsoft and prevent the wireless connection

The Toshiba Software on this laptop I have is causing a conflict with Microsoft software and I can't connect wirelessly to an ad - hoc network. Wireless Auto configuration does not automatically start as Toshiba Software is causing a conflict, above, this rolling. If you have also encountered this problem please can you me what you can do to permanently solve this problem? For the moment, I have to go through a process of manually start the Wireless Zero Configuration services and fiddling around with disable and then re-enable wireless network connections if I'm lucky then it finally works, and I have internet! If you are unsure how to permanently solve this problem you know what the telephone support number is for Toshiba UK?

Thank you very much

John

Hello John

What model of laptop and operating system are you using?
Do you use the preinstalled original Toshiba OS?

If you want to talk with Toshiba Toshiba s call hotline in the United Kingdom. The number is on the Toshiba UK support page.

Tags: Toshiba

Similar Questions

  • Almost any time I use the usb climb on my computer (with flash or ipod players) it freezes and crashes windows. I am up to date with drivers with Microsoft and HP, what can I do to stop this?

    I have no problem with the usb drives but in recent times, this happens all the time.  I can go into Device Manager and uninstall my usb drivers and allows that, sometimes, but it's a temporary solution.  I am up to date with drivers with Microsoft and HP, what can I do to stop this?

    Hello

    You can try to use your boot USB storage device and check if that helps. A clean boot helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot. http://support.Microsoft.com/kb/929135  
    (1) perform the clean boot
    i. Click Start, type msconfig in the search box and press ENTER.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    II. in the general tab, click Selective startup.
    III. under Selective startup, clear the check box load startup items.
    IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.
    v. click OK.
    VI. When you are prompted, click on restart.
    VII. after the computer starts, check if the problem is resolved.

    (2) enable half the services
    (3) determine whether the problem returns
    (4) enable half of the startup items
    (5) determine if the problem returns
    (6) repeat the steps above until you find out which program or service is causing the issue
     
    After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
     
    Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    (i) click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    (II) on the general tab, click the Normal startup option, and then click OK.

  • What I see if I work with Microsoft and exchange of data on the creative clouds with people working on Apple?

    What I see if I work with Microsoft and exchange of data on the creative clouds with people working on Apple?

    That all depends on what you want to share

    The data files that are "industry standard" such as the JPG images are the same on both platforms

    Files that are specific to the platform, such as video files on a Mac or Windows, AVI video files MOV will either require conversion or additional software (to open a MOV file with a Windows program, you must have installed Apple Quicktime for Windows)

    In addition to this, the files that are specific to Adobe... such as the InDesign files... are not always compatible because of new features in newer versions, like a Premiere Pro video project file created in the 2015 version cannot open in 2014 version

    If you have problems with files and specific programs, you should ask for help in the forums for these programs

    If you start the https://forums.adobe.com/welcome Forums Index

    You will be able to select a forum for the specific Adobe products you use

    Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

  • I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

    I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

    Your MC ID: xxxxxxx

    Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

    I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

    Hello

    I suggest you contact Microsoft Learning support team to improve assistance:

    http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

  • IP address conflict with another system on the network.

    Our operating system is Microsoft Windows XP Professional Version 2002.  WE have set up on a small network of 6 computers.  On three computers, we get a window that opens by telling us that "the system has detected an IP address conflict with another system on the network."     Any ideas as to how we might resolve this problem?

    Hello Jackie,.

    Also, try the following.

    Method 1: Check the settings for dynamic host, Host Configuration Protocol (DHCP) on the router. Contact the manufacturer of the router or the access to the same provider.

    Method 2: Release and renew the IP configuration.

    • Click Start. Click Run, type cmd, press ENTER.
    • Type the first command enough ipconfig and press ENTER.
    • Then type the second command ipconfig / renew and press ENTER.

    See if help above.

  • Getting the error "There is an IP address conflict with another system on the network." on XP computer

    "There is an IP address conflict with another system on the network." I keep getting these messages on my computer. -What it means and how to solve this?

    IP addresses are assigned to a computer in one of two basic methods: the address is assigned automatically by the device "in charge" of the network (in your case, the wifi hotspot router) or the address is set manually on the computer.

    If the address is assigned automatically, the router is "smart" enough to assign a different address for everyone.  However, if your computer has a fixed or 'static' IP address assigned manually, it may conflict with an address assigned by the router to another computer.

    You do not specify, so I'm going to assume that your computer is running WIndows XP...

    1. On your computer, open the network connections (start > run > ncpa.cpl > OK)
    2. Right-click on the icon for your wireless adapter and select Properties
    3. Click on the 'Général' tab, select "Protocol Internet (TCP/IP)" from the list of "this connection uses the following items" and click "Properties".
    4. Select the boxes for two on "Obtain an IP address automatically" and "Obtain DNS server address automatically"
    5. OK your way out.

    This will not adversely affect your computer somehow.

    If the two "automatic" settings were already selected, it is likely that your wireless adapter is managed by a utility provided by the manufacturer of your computer or your adapter wifi rather than Windows.  There should be a wifi icon in the system notification area (near the time display).  Click or right-click on it and see if you can access the menu of configuration settings or to determine at which it is useful.

  • I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

    I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

    original title: acquisition of network address

    Hello, Steve.

    Try this link below on how to reset IE and let me know if it helps.
  • Windows XP SP3: There is an IP address conflict with another system on the network.

    As mentioned, I am under Windows XP SP3.  Starting around June 14, 2011, I get this error message: "There is an IP address conflict with another system on the network."  I didn't any problem access the internet, which is weird considering all the forums I've read the user has had problems with this.

    I followed the steps to solving this problem.  I checked the IP addresses on all devices connected to my network. none match the computer, I get this message.  I tried refreshing and renew my address this computer's IP, but that has not solved the problem.  I've updated my modem drivers; who has not solved.  I checked the settings on my router but nothing.  I have turned off all devices in the House connected to the network, unplugged both the modem and the router, plugged the modem back in (anticipated for a constant signal), then plugged the router and gives him the time, but I got the message again.  I ran scans anti-virus and anti-malware, but neither picked up something.

    I am out of resources in this regard.  I guess that something might be wrong with the router, but that doesn't seem right.  I had no problems with the router as I bought it a year ago, and as I mentioned there are no connectivity issues (always as fast as I'm willing to pay my provider).  Two things have popped up in my mind that could possibly impact this: all about 14, there was a Windows update that has pushed down and the message began not to burst, until, after downloading (but I have not had this same problem on other computers that have received these updates) , and there was a very, very brief power surge (second meaning) in the House around the 16th which caused no (to my knowledge) do anything stop but not a hand a few clocks.  Thank for any help with this!

    No. except if you must move the computer to another network or if you are not actually that responsible for the network.

    As long as you are in charge of your network, you can configure your router to reserve an IP for your machine OR set up so that the DHCP range is, for example, all the IP addresses above to x.x.x.100 and you you give an IP address below that (say x.x.x.99).

    In the first case, you let your computer configured as DHCP - your router just recognize it and gives this machine (and only this machine) reserved IP address.  For the latter, need to change the settings in Windows after changing your router so the DHCP range does not interfere with the static IP address range.  I would say that the latter is more likely to be a problem than the first, especially if there is a chance that this machine moves from one network to the other.

    Personally, I use the booking method on my home network.  In this way my laptop, iPad, etc. all get a given IP address every time (an I know) and I have to set up the real device special somehow.

  • Windows - system error. There is an IP address conflict with another system on the network.

    Windows - system error. There is an IP address conflict with another system on the network.

    This message indicates a problem with the assignment of IP addresses on a home network.  Restarting the computer should fix.  If you have a broadband router, restart the router, too. Boulder computer Maven
    Most Microsoft Valuable Professional

  • I was called by a man saying he was with Microsoft, and that someone tried to hack my computer.

    * Original title: mess up BIG TIME

    I was called by a man saying he was with Microsoft, and that someone tried to hack my computer.  They consulted my system through a program called somewhere or some how some way when I told them that I had already paid for anti virus and hacking they hung up but still had control of my computer.  They continued to open the files, even if I tried to stop my mouse does not work only them would be.  Please let me know how do I know if they have access to everything and I have to do next... .change all accounts, passwords or is it at the end?  I'm not a computer person and appreciate any help I can get.  Thank you, Sue

    Yes, you have been scammed.

    Quietman, see: I was hacked... What should I do?
    http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/?p=3071944

    Download the free versions of these tools. First check the updates and then run a full scan with each.

    Malwarebytes Anti-Malware
    http://www.Malwarebytes.org/products/malwarebytes_free

    When offered, uncheck the box: activate the free trial version of Malwarebytes Anti-Malware bonus.

    AdwCleaner
    http://adwcleaner.en.LO4D.com/

    SuperAntiSpyware
    http://www.SUPERAntiSpyware.com/

    Junkware Removal Tool (free)
    http://www.bleepingcomputer.com/download/junkware-removal-tool/

    This is a scam that last for years. Microsoft never does unsolicited phone calls.

    Is calling, Microsoft, a scam?
    http://answers.Microsoft.com/en-us/protect/wiki/protect_other-protect_scanning/is-that-call-from-Microsoft-a-scam/6718e389-8a00-4E4B-ACA1-d07298ea4c19

    Report a scam to technical support
    http://support.Microsoft.com/reportascam

    It's a real call from Microsoft?
    http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft

    Avoid scams to phone for tech support
    http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx

    Do not fall for phony phone technical support
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

    Aggressive, persistent Windows tech support fraudsters continue to track consumers
    http://www.Computerworld.com/s/article/9248122/Aggressive_persistent_Windows_tech_support_scammers_continue_to_stalk_consumers

    What is a certified Microsoft [or] partner?
    http://securitygarden.blogspot.com/2011/09/Microsoft-removes-Gold-Certified.html

  • I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

    I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

    Hello

    Yes both licenses will be in conflict and it will activate CS6 with creative cloud.

    You can only use a license on a computer and you can also download the previous version of the creative cloud.

    Concerning

    Gilles marneffe

  • What is the organizational structure of microsoft and what the different type of organization between microsoft and linux

    What is the organizational structure of microsoft and what the different type of organization between microsoft and linux

    Microsoft communities must answer a technical question about Windows 8, Windows 7, Windows Vista and Windows XP.

    If you have a technical question, please let us know. This type of information you are requesting is not available in this forum. Do a search on the internet, and you should be able to find this kind of information.

    Sincerely,

    Marilyn

  • Cannot select the Panel of configuraiton of 'Security' with Down and Up the keys on the keyboard

    After you install BlackBerry10Simulator-Installer-BB10_0_06-384-Win-201207130120.exe on Windows XP (Vmware player 3.1.3), I can't select the Panel of configuraiton of 'Security' with Down and Up the keys on the keyboard, because "Screen" is the last item on the screen.

    It works with a mouse. Thank you.

    I use a computer thinkpad notebook and always use the navigation button (red button), so I now have to use a mouse.

  • I've updated the plan of the photographer and since the download, I had problems nonstop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or should I cancel

    I've updated the plan of the photographer and since the download, I had problems with non stop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or do I cancel my subscription to the CC and return to the CS6?

    The problem of fluidity can be the result of a graphics card problem:

    Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.

    On the bridge: when you select an image and press the space bar, what happens?

  • Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

    + Sorry for my English is not my mother tongue. +

    Hello

    I expose my problem:

    I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

    Configuration of the laptop:

    * Windows 7 Ultimate 64-bit (with all updates installed).
    * All the updated drivers correctly.
    * With the latest version of the BIOS.

    Router:

    * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

    The router configuration:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, that this channel is relatively free).
    * Width of channel: 40 Mhz.
    * Maximum tx frequency: 300 Mbps.

    Other information:

    The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated the firmware.
    * I tried all the settings of the wireless card.
    * Bluetooth off (without interference).
    * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

    Thanks in advance,
    Greetings.

    Post edited by: Xibalba

    Have you tested using different channels?
    Have you tested speed WIFI connected to another router?

Maybe you are looking for