Toshiba Stor.E Canvio HARD drive does not appear

Similar Questions

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• hard drive does not appear el capıtan

  Hello. First of all, I must say that I am not good in English. But I'll try my best to explain what my problem is.

  MacBook Pro OS X EL CAPITAN series: 10.11.2

  I have a hard drive which called WD My passport 500 GB. When ı connect to my mac. I get my password to WD unlocker. Its does not appear on the desktop. It shows the utility disc, but as a transparent. Its gives no information on the hard disk, as applications 0 KB, photos etc, 0 KB.

  I tried first aid button. It said first aid was fallen I tried to connect the Desktop button. He dıd not happen. It is just to stay there as a transparent. I closed and open my mac again. I wanted to be sure that my hard drive is broken or not. I tried with another computer which is windows. He worked there. My disc format is MS - DOT (FAT) but ı have same problem. Can you help me to fıx it. I have very important files. Thank you

  Best account.

  I'm not 100% sure, but I think the problem is that you have installed the WD (WD Unlocker) software. On a Mac, you should not install all software 'smart' to manage external dives.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• external hard drive does not appear

  I have a WDC32 external hard drive that I have used before.  It appears in the device mgr under the disk drive.  It does not appear in any drive computer.  I tried the 2 front (UBS) and 1 in the back and no change.  Bishop says peripheral device works very well and the latest version of the driver software is installed... I don't know, but I thought it was previously assigned to the j: drive, but is no longer is shown... Thanks in advance

  Hi cluess in chicago,.

  1. did you of recent changes on the computer?

  I suggest that you check in Disk Manager if the drive is detected and more later assign the drive letter, check if it works.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP P6130Y: Secondary hard drive does not appear in Windows Vista - 64 Bit

  I installed the second SATA drive in my HP 6130Y, a 1 TB WD Black. HE appears during startup, is displayed in the home page of the BIOS password HP PC-Doctor and SMART BIOS tests.

  But he does not appear in Windows Vista 64-Bit.

  My current setup is configured as follows:

  • SATA1 - Seagate 750 GB SATA drive
  • SATA2 - DVD
  • SATA3 - new WD 1 TB drive.
  • SATA1 controller is set to RAID.

  Thanks for any help you can provide!

  Hello

  Go to Administrative Tools--->---> Disk Management in the computer management and expand the screen entirely.

  Now, look for the new drive, right mouse click on it if you see initialize and then format the new hard drive.

• Hard drive does not appear in the preferences?

  Hello

  I have an external hard drive that I want to use as the scratch disk in photoshop, but it does not appear when I open preferences > performance? My other two hard drives that are connected and mac HD appear well?

  This external drive is properly formatted as a Mac OS Extended ?  It should not be formatted as logged, but it MUST be Mac OS extended.

• Toshiba Q300 480 GB HARD drive does not start after migration

  Hello

  I bought a disc of Q300 489 GB to replace a small 840EVO of Samsung. I used the toshiba tool to clone the smallest to the largest player. However when the clone is finished and the reboot of the machine the machine hangs just at the start of the process (before starting windows 10). If I go back to my little samsung it starts without a problem.

  I tried to treat twice with NTIEcho and also tried with Partition AOMEI tool, all attempts have failed to start on the Q300 drive.

  I am just tempted to refer the reader to Ebuyer, getting another Samsung. Maybe Toshiba can tell me how to get the drive working properly?

  Regards Sean

  PS. can someone direct me to a page where I can raise a ticket of Toshiba, I would be grateful. There seems to be some links broken on the UK site.

  Hello.
  Do you have an error message when the operating system does not start? Appearing in AOMEI Partition Wizard you have been used during the replacement of the Samsung drive?
  After the largest disk cloning, you may need to change the boot settings in the BIOS or to remove the previous Samsung drive to test.

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.

• Adapter Ultrabay - HARD drive does not appear

  I just bought a new adapter for my T400 Thinkpad ultrabay. I put a brand new Toshiba 320 HDD and place in the laptop. The HARD drive is another laptop but is still new, I bought my companion who has installed a newly purchased SSD in his cell.

  in any case, when I placed the ultrabay adapter in the notebook with the new HARD drive, I received a message that Windows 7 was install drivers for the new Toshiba drive, the standard procedure. But I don't see anything in my computer.

  HARD drive appears in Device Manager but not in my computer. See the screenshot.

  I tried to follow these instructions with no luck. I also tried to update the BIOS with no luck.

  The light on the adapter does not-maybe it is somehow off?

  Help, please...

  Too bad. I solved the problem. I used Partition Wizard Home Edition to see the drive and create a new NTFS partition on the HARD drive and a drive letter assigned.

  Thought I'd post the solution here if someone would know a similar problem.

• Hard drive does not 'appear '.

  I recently bought a new 640 GB hard drive to use as my main drive. Currently, I have a 150 GB drive and have room for a second. I just plug it in and start the Vista installation CD and it does not even notice that I installed it. I came home and the cables SATA, to make sure I got a new worked very well or that the new disc has not broken.

  Well, now the new disk appears, but the old man went. (I think I've been too power since I changed the disc autour). I know that the two cables, but when one of the disks is plugged into the second port, it does not work. This is my first install a new hard drive, so any help or suggestion would be nice!

  (To copy Vista on my new drive, I use this tutorial). I can provide any information that you would need to help, but I'm tired now, so ask away if you can help!

  
  

• hard drive does not appear in the finder - but on desk

  Hello Hello,

  So I did some mess and it would be wonderful if you can help.

  I tried to make the 'see' an external drive using the privacy setting, but I managed to do away

  ear of the finder. I can see and use it on my desktop and utility disk, but it does not show in finder. What I did do, and how to fix it please?

  Thank you!

  Try to eject, and then unplugging the drive and in him plugging.

  Did it solve this problem?