Toshiba Tecra 8000, monitor problem

Similar Questions

• Tecra 8000: monitor and the HARD disk does not work - does not start

  I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

  Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

  So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

  Thank you!

  Hello

  Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

• Tecra M2 - monitor problems

  You just bought a Tecra M2 three days ago. When I turn on it almost every time is delivered with the message, the program Nvidia? could not be closed. Whem twice I turned on the pc, the monitor has been with strikes. Who is wrong?

  Hello

  If your laptop is all new contact Service partner and they can check what is the problem with your monitor. Normally avoid any strike.

• Tecra 8000 boot problem

  Hello

  I am new to this forum and I hope that its going to be a help. Ive had my notebook from toshiba for about three years, and I think its great. stoped to work 4 months ago and I was just it's bin but I thought it would be a waste. in any case, I thought I'd give it go to see if I could fix or it is better to set.

  The problem is when I start the notebook, it stays on the screen "in touch with tomorrow toshiba" and does nothing else. I can't access the bios it will do nothing. Please someone at - it an idears for what is wrong, if so, please answer.

  I don't really want to throw and if I could get it fixed at a price fair, if everything goes well he will continue for another three years.
  Thanks again and any help would be great

  Hello

  It is not easy to say what is the problem, but in my opinion, it may be material defect. You built in hardware components like new memory RAM or HARD drive?

  If you are so happy your Tecra you can contact the Service partner. They can check and detect if there is some part of material defect.

• Toshiba Tecra A8 monitor not recognized

  Hello

  I have a Tecra A8 PTA83A 042012 with the video driver Intel (r) Express Chipset driver 945GM.

  I also have a Toshiba - 1LC2 monitor 21.5 Tekbright PA3719A "
  The laptop does not detect the resolution correct for this monitor and the closer, I can get 1920 x 1080 native resolution is 1400 x 1050, which looks tense and ugly.

  The graphical interface drivers are updated according to the Toshiba site to THE (even though they are 2006).
  I tried to find new drivers (winxp_14324.exe that seem to be the latest drivers for the video chipset intel), but the driver said that he does not support my hardware.

  How can I get this monitor to display correctly?

  PS. I use an advanced port replicator but tried as well without it.

  Any help greatly appreciated

  See you soon

  What ports do you use?

  Maybe the graphics card has limited resolutions supported. Check in the manuals of the user to page 180 s.

• Toshiba Tecra 8000 300 Mhz - CPU extensible?

  Hello

  I have a tecra tohiba 8000 with a 300 Mhz Intel PII processor.
  Can I upgrade the CPU to 366 or 400 Mhz?

  Best regards

  Hello Homer,

  Sorry, but you cannot upgrade this processor!

  Also 66 or 100 Mhz more aren't a huge speed advantage, so it is not profitable!

  For more speed you coould update your RAM of 256 MB.

  Hans Bye

• Tecra 8000: Startup problems

  I was called to my classmates because he has problems with his laptop...

  At startup it asks EC/KBC drive... in research I found that it is the update of the bios...

  howevev I can't update because it has an external drive USB floppy only... the bios can be updated by CD rom? or that this message can be ignored if I can update Via Windows...

  Thank you very much
  Billie Skeggs
  BILLIG. [email protected]

  [Edited by: admin April 30 05 15:52]

  Hello
  have you tried booting in save mode?

• Upgrade RAM and disk on Tecra 8000

  I have a toshiba tecra 8000 p2 266 mhz, 64 MB, 6 GB HD.

  My question is I want to upgrade the ram and hard drive. can someone tell me what is the maximum I can put in my laptop. IM aiming for a 256 RAM and 40 GB HARD drive... I want to upgrade the processor, but I don't think it would be possible. If Yes please let me know what is the maximum.

  Thank you guys

  Hello

  I found information that your device can handle with max 256 MB and compatible module unit Pentium II are:
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB

  For user who have the Pentium III unit I'll also post this compatible module are:
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)
  PC100 32 MB (PA3003U)

  HARD drive upgrade is always a little more problematic because of the maximum capacity that will be recognized correctly, but I assume you can use up to 20 GB of HARD disk without problem.
  Sorry, but I didn? t find accurate information about it.

  Good bye

• Tecra 8000, linux & ethernet & pnp

  Hello

  I am trying to install Linux on a Toshiba Tecra 8000. The problem is with a chipset Realtek ethernet PCMCIA card (module: 8139too), which is recognized, but the network is unusable. I always get an error of SIOCSFFLAGS and assigned interruption is 0, which means that it has failed. I have read many times that I have to disable plug-and-play, but there is no choice when I start with a floppy and run the TSETUP. EXE. Y at - it an alternative to this? Do you have any other clues?

  Thanks, Thomas

  Hello

  Perhaps the following site will help you solve the problem.

  Here are 2 official linux Toshiba sites and there are also some tips.

  http://newsletter.toshiba-tro.de/main/index.html

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  PS: You can also enter the BIOS if you press the ESC key immediately after lighting NB!

  Goodbye, Meier

• Screen on my Tecra 8000 resolution

  Ok..

  I have a toshiba tecra 8000 laptop with windows xp.

  The pc started the bad resolution with 800 x 600, (I had black spaces next to my screen, all parties) so I turned it in windows for 1024 x 768 whitch works perfectly. Now the screen is completely filled with urz... screen :)

  But...

  It seems to only be changed in windows. When I start a game or another program, it starts in a small 800 x 600 (?) or some other resolution and leash areas black. When I start the laptop, the resolution is also bad (u see back (?) of text from somewhere near the middle of the screen) is changed in windows :(

  How can I solve this problem (if it has something to do with the bios or something... hope you can tell me how to fix this!

  I would be very happy

  Hello

  Please check the stretch function in the BIOS and try again.

• Tecra 8000: Question on Windows XP performance

  My Tecra 8000 is located in the Microsoft minimum specification to run Windows XP.

  I fear that by installing XP, the machine will produce wrong with XP, devours resources.

  I would welcom hearing from others who have the experience to put XP on this or similar spece laptop.

  Used PC for internet/email and general use Office - no software starved of CPU/memory used.

  Paul.
  ++++++++++++++++++++++++=
  Specification of the machine: -.
  Processor: GenuineIntel family 6 model 6 366 MHz walk 10
  Math support: present
  BIOS: TECRA8000 v9.30 TOSHIBA, 31/12/99
  Bus type: PCI, ISA
  Ports: 1 parallel port, series 2
  Memory: 256 MB (25% used)
  Floppy drive: 1.44 MB
  Hard drives: 18,63 GB
  Multimedia: CD-ROM
  Video: 1024 x 768 in true color, NeoMagic MagicMedia 256 AV version 4.20

  < operating="" system="">Windows: 4.0 (Build 1381)
  NET Clients: Microsoft Windows Network

  Hello

  The material must be able to handle the Windows XP but I think that you will not find the Toshiba XP drivers for this device.
  Therefore, it will be very difficult to run Notepad with all Toshiba Tecra 8000 features.

  However, I think that it of possible to install Windows XP but the operating system will not work with maximum efficiency.

• Tecra 8000: battery not charging

  I have a laptop Toshiba Tecra 8000 works excellently on the radio but cannot get a battery charge! I have 2 new batteries, but when I go to power options it says battery not detected. However if you pass the sector off the power the computer will run on battery for a few minutes.

  Is that all I have to do to recharge the battery because it denies services to broadband radio if I can't charge the battery.

  Thank you in anticipation

  Roy Drysdale

  Hello Roy

  As much as I know there is no any kind of parameters for the battery. Everything works automatically and power of electronic power control controls this. Software gets some info from the hardware store.

  If the battery is not recognized by the system, I'm afraid, there is not much to do and the unit must be checked by the service of the laptop.

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them

• Tecra 8000: update of the Bios allows booting from USB?

  Hello

  I have Toshiba Tecra 8000 (simple 266 MHZ)
  Will be this bios bios-t8000-930 - trad.zip (08/26/02) allow you to boot from USB?

  Hello

  As far as I know, you need a supported drive to boot from external USB drive.
  The update of the Bios won't boot options.
  If you want you can ask for the readers supported ASP.
  I found this site one:
  http://www.CCD.co.UK/Xpress/catalogue/product.asp?PN=JD0000283

  It s a Toshiba CD - RW / DVD-ROM combo wit reader PC Card interface.

• Tecra 8000 sudden power outage

  Hello
  I have a tecra 8000, the problem is that there is a sudden break or sudden running (roaming), the outlets led turns orange instead of green.

  The cable which is the output of the zine warms

  Hello

  Sorry, but I don't really know what you mean. Have you had problems with the AC adapter or the battery charging procedure?
  I can t give you an adequate response to your problem now. Perhaps you can describe your problem in more detail.

  But nevertheless it its s like a power supply problem. In this case, I recommend to contact the service partner.

  Good bye