Toshiba Tecra S2 - supports dual-channel?

Similar Questions

• Satellite A100-490: support dual channel?

  Hello!

  I would like to know if my Toshiba laptop supports Dual Channel.

  Satellite A100-490
  Modell Nr.: PSAA9E-17P04JGR

  Best regards
  Kaan

  Of course this phone supports memory dual channel (DDR2)

  The laptop supports DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM memory modules. It s certainly channel.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29716&ft=m&St=3

  Good bye

• SONY VAIO F Series SVF15412CXB does support dual channel memory?

  SONY VAIO F Series SVF15412CXB does support dual channel memory?  Or is it only a slot?

  I'm curious to know if I can put a second stick of RAM in there for performance dual channel.

  Hi gremark,.

  I understand you want to be sure of everything. I checked the service manual for this model and even tried to open a laptop of the same type and I can assure you that this model supports the double delivery. You can add up to a stick more than 4 GB of ram to increase the memory capacity.

  ~ Mark

• Is 2 x 1 GB memory supports dual channel on Satellite Pro M70?

  Hello

  I was wondering if I can wquip my M70 with 2 x 1 GB of RAM running in Dual channel mode? Seller is sure it should work, but as I found no info on the pages of toshiba, I would rather confirm here.

  THX in advance

  Hello

  The seller was right. The Satellite Pro M70 supports DDR2 memory modules. These modules are dual channel.
  You can upgrade the memory up to max 2048 MB (2 x 1024 MB)

  Greetings

• Satellite A300-14 t - support Dual Channel RAM?

  Toshiba Satellite A300-14 t taken supported RAM Dual-Channel technology?

  Hello

  Yes, but the laptop is equipped with a 2 GB card memory DDR2 (667 MHZ).
  You will need 2 modules of memory in order to be able to use the Dual Channel.

  See you soon

• Satellite L30-134 does support dual channel DDR2 memory

  Does anyone know Satellite L30 does support two mode because I've got 2x256MB and a 512 MB all Micron MT modules?

  Wojtek cordially

  Hello

  Of course, the Satellite L30-134 supports DDR2 memory modules.
  I found a few listed on the Option & Accessories site of Toshiba Europe site:

  What are supported:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Spectrum x 360 13: spectrum is x 360 13 support with memory dual channel

  I want to buy the spectrum 360 13 x a few days later.

  I've read the previous post, any set of spectrum x 360 is installed with only 1 on board memory.

  My question is, the Board of Directors on performance memory taken supported dual channel?

  I'll use laptop to play games, even if it is difficult to perform as well as those of office. But it's still a lot of difference between single channel or dual channel.

  Also, I play DiableIII, path of exile or LoL etc...

  Spectrum of HP x 360 13A aboard the single memory slot, they cannot be upgraded.

• Acer Aspire E1-570 does support RAM dual channel?

  I installed the program CPU - Z and it says that my laptop uses the RAM single-channel mode. Support dual channel mode and how to change mode dual channel?

  Felix_Aliaj,

  I don't see dual channel support listed for the memory of this system.

• Dual channel mode is not enabled on the Satellite P50T-B-10V

  Hello

  I recently bought a laptop by Satellite P50T-B-10V.

  Everything works fine, but I saw in the software helped that it s not activated for 1The memory channel mode, although the chipset support this mode.

  How can I solucionate what mind?

  + Memoria driver +.
  + Type Dual Channel (128-bit).
  + Modo Activo single channel (64-bit) +.

  I hope that your answers! Thank you!

  Dual channel mode can be activated manually.
  Mode dual channel will be activated and used automatically if all of the requirements be fulfilled.

  What does that mean?
  Well, to use the two channels, you need two memory modules and both modules need to support dual channel.

  The Satellite P50T-B-10V seems to be equipped with a module of 8 GB RAM
  http://www.Toshiba.PT/laptops/satellite/satellite-P50-b/satellite-P50-b-10V/

  This is why the double channel does not appear to be used.

• Qosmio F10 and dual channel

  Hello

  I have a Qosmio F10 with 512 MB, and I want to upgrade to 1024. I don't know if my qosmio supports Dual Channel. Can I add a sodimm pc2700 512 MB module and two-channel will work or I need exactly the same model of my laptop.

  TNX!
  Rood

  Hello

  Qosmio F10 uses DDR RAM modules. This modules support dual channel.
  As far as I know that you can upgrade the memory of max 2048MB and these modules are supported:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

• These RAM modules will run in mode dual channel - Satellite A100?

  I have the Satellite A100 that supports dual channel.
  HYNIX HYMP512S64BP8-C4 (original modul memory supplied with the laptop)

  http://www.Hynix.com/datasheet/PDF/module/ds_512M_DDR2(B-ver) based_SO-DIMM (Rev0.2) .pdf

  and this kingston kvr533d2s4 / 1024 mb

  http://www.ValueRAM.com/datasheets/KVR533D2S4_1G.PDF

  They both non ECC unbuffered cl4 200pins 533 mHz ddr2 sodimm 1 GB but the TRA and tRC timings seem a little different.
  These modules of memory will work in dual channel mode?

  You will be very happy if someone As the same model of laptop and exactly these modules. I just recommend using modules of RAM recommended. These modules are tested and you will have no problem of compatibility.

  Kingston modules are very good quality products, and I believe that no one reported any compatibility problem. If you visit the Kingston's support page you can find all module compatible with your laptop.

  Check it on
  http://www.EC.Kingston.com/Ecom/configurator_new/mfrmod.asp?root=UK&LinkBack=http :// www.kingston.com/ukroot

• G7-1329wm Pavilion: 1329wm RAM Dual Channel. Update the bios?

  I bought 8 gigs of RAM laptop for my G7-1329wm Pavilion. Here it is:

  http://www.Amazon.com/GP/product/B00OUK919M?PSC=1&redirect=true&ref_=od_aui_detailpages00

  

  It is already much faster than what I had before. My problem is that I expected to run at a speed of 2133 MHz and dual channel mode. CPU - Z does not have these results.

  

  The two RAM slots show the same thing.

  It made me start to wonder. Maybe my cell phone does not support dual channel mode or these speeds. So I was wondering if I could do a BIOS update if everything goes well accept more modern equipment and their speed. I checked in CPU - Z that my bios is old path, return from 2012. I couldn't find any support for an update through HP. Can an HP expert please let me know what I can do to get the most out of my RAM speed?

  

  Repair:

  DDR3/1333 MHz (DDR3-1600 (1 GB / 2 GB / 4 GB / 8 GB) modules of memory supported as an alternative source for the DDR3-1333)

  So max the card/motherboard/BIOS processor speed will allow the memory runs is at 1333 mhz. I'm frankly surprised the memory you have installed works at all. It's the equivalent of putting gasoline in an engine that can be only ordinary.

  The problem goes well beyond BIOS. The chipset can operate at the maximum of 1600 mhz, and HP has set up to run at 1333.

  It is the specified memory:

  Memory modules (DDR3 10600 1333 MHz 2): 4 GB 621569-001

  http://www.Amazon.com/HP-621569-001-1333MHz-PC3-10600-SODIMM/DP/B005UF674S/ref=sr_1_1?ie=UTF8&QID=1457907477&SR=8-1&keywords=621569-001

  It may seem paradoxical, but your laptop can actually run a little faster and in double channel if you put in the slower memory. You can see there is a lot of information in gray in the CPU - Z I think because the system is not able to see all the technical features of memory, that she does not expect to be there.

• Aspire Revo R3700 memory does not work in dual-channel mode

  Hello

  I have a Revo R3700 a few years now with 2 GB of memory. The PC came with the DDR3 10600 Hynix 1x2GB memory module.

  I recently bought a second module of the same 2 GB of the same brand (Hynix) and part number.

  After you install the BIOS and Windows detects 4 GB with no problems and everything seems to work fine, but CPU - Z tells me the following:

  (1) it is running in single channel and not dual-channel mode.

  (2) aren't 399 MHz and 800 MHz.

  3) SPD 1/2 bandwidth is 667 MHz and no 1333 MHz.

  Do I need a BIOS update or configure something?

  Sorry if I mix things up.

  Thanks in advance

  I've attached screenshots below.

  

  

  

  Module original stock Acer is on the left. A new one on the right.

  

  The Aspire AR3700 doesn't support dual channel. This system only supports single channel.

• Need to remove the password on Toshiba Tecra A8 BIOS

  Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?

  Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K

  You must send in a center of Service from Toshiba for password removal. There's no other way.

• HP 15-af153ur: is dual channel ready? 15 - af153ur

  Morning!
  (Card mother, cpu or something else) take in dual-channel mode memory?
  I am trying to set up two identical memory sticks, but cpu - z always indicates that the memory works in single channel.
  The same memory sticks worked quite good in double channel on the other laptop.
  I tried to set up two identical sticks of laptop (both are 15-af153ur), and there is also no effect.

  Could you help with it?

  Thank you

  Michael

  Hello

  It supports the dual channel, given that the processor of AMD E2-6110 memory controller has only a single channel for both RAM memory modules (DIMM)

  http://www.CPU-world.com/CPUs/PUMA/AMD-E2-series%20E2-6110.html

  Memory controller

  The number of controllers: 1 Memory channels: 1 Width (in bits) of the channel: 64 Memory support: DDR3L-1600 DIMMs per channel: 2