Toshiba TG01 Mobile phone - USB Conecttion problems

Similar Questions

• Access to the mobile phone HTC WIFI problem

  Hello

  We have Cisco LAP wireless environment, The WLC is WISN (software version is 7.0.98.0), access point is Cisco 1142. We have a user with HTC mobile phone (OS is Android 2.2) can not access the WLAN (WEP key + WEB-based authentication), it must take a lot of time to get the IP address or IP address cannot be obtained. Is there someone have similar problem?

  Best regards

  Jackson Ku

  Glad to know that it works...

  At first I don't think that the problem was the device but conffigured load balancing...

  Well, since you wanted to have certain amount of units in the network, by AP.  If this limit is reached by the AP, brand-new answer association will respond with code 17 the customer tell "hey dude, im complete, look for a different access point", is the customer later new which either decides if he get another one or continues to try to associate with the access point in the box...

  This feature can be used in order to customers balance the load through towers on a single controller. Customers choose the AP based on the client to report Signal to noise (SNR) in this AP and the window of the load balancing.

  Dynamic balancing works in the link phase. If active and the conditions to balance the load, when a wireless client attempts to join a TOUR, association executives of response are sent to the customer with a package of 802.11 response that includes the code of State 17. This code indicates that the PA is too busy to accept any associations.

  It is the responsibility of the customer to honour, process or ignore this frame of response association with reason code 17. Some clients to ignore it, even if it is part of the 802.11 specification. The standard requires that the client driver must seek another AP to connect to since he receives a 'busy' of the first AP message he's trying. Many customers do not do this and send it to the request of the association. The customer in question is allowed on the network wireless during subsequent attempts to associate.

  The controller sends a response with reason code 17 association frame to the client. If the customer decides to ignore the reason code 17, the customer can try the same AP again and this time the PA allows the customer to complete the association.

  If the customer meets the association 17 response status code, the client then tries to associate with a different access point. For example, if balancing is activated and the window of load balancing is configured as five customers, when a sixth client tries to associate to the AP, the client receives a frame of response of the 802.11 Association with 17, status code that indicates that the AP is busy.

  Here is the link on how it works...

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00809c2fc3.shtml

• Cell phone warranty Toshiba Tg01 to Orange UK

  Hello community,

  I had a serious issue to guarantee that Toshiba provides mobile phone Toshiba Tg01.

  Today, I bought a Tg01 on sale at auction platform ebay.co.uk
  But I live in Germany, not in the United Kingdom.

  The seller wrote in his description, Toshiba offers a guarantee of 24 months on the phone. The guarantee is valid worldwide (he wrote).

  He bought the phone in an orange shop in the United Kingdom.

  Most of the other sellers on ebay.co.uk who sell the phone Tg01 write that the warranty for the phone is one year provided by Orange UK.

  So what is right?

  How can I use the warranty of the phone when I live in Germany?

  And how long is the warranty?

  Person to contact in a warranty case?

  It is a shame that Toshiba has not only support site for mobile phones as the Tg01.

  It would be great if you could help me with my problem!

  Thanks in advance!

  Best regards

  Manual

  In my opinion, you should contact your mobile operator. They offer mobile phones too, and they know how it works.
  They also have the addresses of adequate service where you can repair your mobile phone.

  Check it out.

• How to generate a call via mobile phone connected to the pc by usb

  Hello

  Comment on the call of the UN peut-on generate via mobile phone (nokia6680) connects to the pc by usb from labview?

  I have installed "nokia PC suite". is possible perhaps-this one starting from the palette "Connectivity/library and executable" start this app and automatically generate a call to a predefined number? It sounds complicated and ca me don't think so that it works...

  Apparently these are the commands that allow a cell phone from a PC of Girardon. Y ' there way to use a hyperterminal type program pay to try their hand and then be able to use the VISA features in labview? Pour the moment, I don't see how start. Ports of HyperTerminal manages the communication with RS232 type but comment Girardon the USB Installer takes it a soft pour mobile phone USB connection behaves as a virtual RS232 port?

  I have seen comment importer a dll in labwindows on another project but we must have the description of the dll, the functions name pay to use. In this case, I have all this.

  Thanks if qq can help me car the, I'm blocking (I saw that there were messages on this topic but ca don't allowed me to establish a communication with the phone outside the nokia PC suite software).

  My but is send an alert by such pour a data acquisition application that runs on a computer laptop not connect a network of the United Nations.

  JF

  

  Finally, it runs. When the telephone connection after installing nokia pc suite and a usb cable, the phone appears like adding a virtual COM and another element: "Nokia 6680 usb modem cable. Select the line corresponding to the additional virtual COM port, in my case, it appears as "COM17. Configuration is easy: choose transmission speed (bps 9800 or else up to 115200bps, apparently the phone can detect the selected speed of the rate), 8 data only bits, no parity, no flow control. Then you can send orders to:

  Xxxxxxxxx ATD. followed by the return to call a wagon phone (the phone number is xxxxxxxxx), at the end of the command is required to call (if there is a detected error 'NO CARRIER')

  to send an SMS, send:

  AT + CMFG = 1

  AT + CMGS = "xxxxxxxxx".

  then tape the message to send, followed by Ctrl-Z (ASCII code: 0x1A)

  If you are interested in this subject, I advice allows you to start the test with hyperterminal or another program to easily implement a serial communication, and then implement in Labview. I guess the AT commands are a little bit different with other phones like Nokia.

  Note: to send Ctrl-Z with Labview, right click on the array of strings in the scheme of hexadecimal code, then select Add 1A and re - click to print the normal code...

• Use the adapter USB Bluetooth Toshiba with cell phones LG

  Hello

  I have the * Toshiba Bluetooth v2.0 + EDR USB Adapter * in my PC Windows XP Pro SP3.
  I want to use it with my * LG KC780 * mobile phone. I have installed all drivers and programs.

  PC and phone are in "coupling", but the settings Bluetooth from Toshiba utility cannot connect to the phone.

  I can't use "file transfer" or "webcam bluetooth" function of my phone. Nothing.

  How can I do?
  Thank you very much

  You can try changing the security mode of the PC:
  (Right click on the tray icon to System Bluetooth-> Options-> Security-> Custom Level-> Mode: level of link applied security)

  What happens if you click on a file in Explorer and then click on 'Bluetooth' in the menu contextual right click?

• Toshiba PX1267E - 1 32 - USB on every PC problem

  Hi, sorry for my bad English.
  I have a problem with PX1267E - 1 32 (toshiba HDD USB).

  When I connect Toshiba HDD on my USB port a message,.
  "This device can perform faster if you connect it to usb 2.0.
  port... Click here
  Also with another pc.

  I have Windows XP Home service pack 3 and Windows XP Home service Pack 2 another pc.
  Can a power problem?

  Thank you!

  Marco

  Cable USB you need two USB connectors? Did you use the two USB ports?

  Do you have an AC/DC adapter with the HARD drive? You must use if you want to use the HARD drive.

• I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say that because I changed my IPhone in a Bar in engineering (Brazil) 6, precisely because of this problem an

  My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say this because I have changed my 6 IPhone in a Bar of genius (Brazil), precisely because of this problem, and the new cell has exactly the same problem

  This is a known, problem if the time is not set correctly.

  us-not-displaying-accurate-battery-data http://AppleInsider.com/articles/16/01/16/Apple-promises-Fix-for-iPhone-6S-6S-pl

• Tecra M9 - Bluetooth, problem with mobile ' phone

  I installed Bluetooth stack and a connection via Bluetooth Manager

  But Tecra will connect only as "Network Access Point.

  How can I create a link as modem - I'm probably not using the Tecra via mobile, on the internet but I have certainly you want to use the functionality of modem from mobile phones to send faxes and SMS (text) messages when out and about

  Any help much appreciated

  You must use the custom of "Bluetooth settings" Mode.
  Take a look at the following document called
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  on this site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO
  and you should make it work.

• A message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.

  problem of pirate?

  We received a message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.  We have not so much text msging and then they want all sorts of personal information (name, DOB, address, e-mail addresses, etc.) and we do not want to do that.  is this a legitimate windows msg and is it possible that I can call someone from microsoft was finishing speaking?  Thank you.

  Hello

  That sounds like a SCAM don't respond so not! Unless you have launched the contact of its likely someone
  I'm trying in fact to steal your account and your identity. If your account has been compromised, see the
  below.

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• you are trying to transfer pictures from my mobile phone to Paolo via a usb cable

  I have a samsung mobile phone and a usb cable that is supposed to dounload for my P.C.but it won't return to the screen, I tried several dounloads, and I just race around someone can help me, I know this is possible because I had it before.

  With the mobile phone connected to the computer, access to the workstation. Locate the cell phone device that will likely be in the volume storage, otherwise by Samsung. Right-click and choose explore.

• Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Hello

  It is possible in some cases - Adpater, power and the ability to read the disc
  are the issues.

  Check with the manufacturer of phone and the USB key and their forums.

  How to: use your USB with the Nexus 7 [root]
  http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

  For phones Windows ask in this forum and check the support.

  Answers - Windows phones
  http://answers.Microsoft.com/en-us/WinPhone

  For other phones check with their Support and Forums.

  Support of SanDisk and Forums (and others) would be a good source of info.

  SanDisk - Support
  http://www.SanDisk.com/SanDisk-support/

  SanDisk - Forums
  http://forums.SanDisk.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• Learn how to connect to internet from pc to mobile phone with a usb cable

  I want to know how to connect to internet from pc to mobile phone with a USB cable

  'S called it tethering.

  1. Search for this term in the manual of your phone.
  2. Search for this term in the contract of your phone network operator because not all telephone network operators allow tethering.

• Samsung mobile phone - photo - says phone not connected - studio think that it is a Windows problem

  Trying to transfer photos from mobile phone Samsung D600.  Drive installed Samsung PC Studio 3.0.  It is good, but says "phone not connected" tried with Bluetooth but makes no difference.  The Assistant said that the two devices are connected.  Don't know what else to do. Any help much appreciated.

  Hi RubytuesdayTD,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  ·         What service pack is installed on your computer?

  You can run the Microsoft Fixit of the article mentioned below and check if the device is detected.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.