Toshiba TL968G - three television channels goes away after a while

Similar Questions

• CC police goes away after I used it for months

  I was using the Alexa Std fonts, which I synced months ago using earlier versions of CC. Today, it is there. Then tonight, he disappeared. I checked on Windows/fonts and checked that it was missing. I went to the CC, but he said that the police were always synchronized. I removed, then it resynced, but it will not even install on Windows. I left CC and then restarted. Quit Indesign, rebooted. Nothing works. I don't know why he stopped, or why it will not be installed, but I NEED. I'm almost done with my project and do not have the luxury of a big delay or having to change fonts after the customer has already approved.

  Help, please.

  I was able to get the problem solved. I contacted the support typekit team (e-mail address: [email protected]) and a good person named Molly responded the next morning. Here is the solution, what they suggested. I tried and it worked!

  • I'm sorry for the trouble. There are a few things we can check everything out right away to start debugging this:
  • -First of all, make sure that you are connected to the application of creative cloud with the same Adobe ID you use for Typekit. Account information are under Preferences > General.
  • -Then try to disable the synchronization of fonts in creative application Cloud, wait for a moment, and then turn it back on. The option to do so is under the gear icon in the preferences > creative cloud > fonts (Typekit 'power').
  • The fonts that you had previously selected for the use of sync should now automatically synchronize to the tab fonts in the creative cloud application.

• Audio device goes away after I turned off the HDMI audio device.

  Original title: disable audio device... where would it go?

  I have 'disabled' HDMI peripheral audio, not realizing that the option then disappear, as it would go and how to I get it back?  If I click 'disable' I don't expect you to disappear, I did not "delete"!

  Hi jagacek,
   
  I suggest that you follow the steps mentioned below and check if it helps to solve your problem.
   
  Step 1:
   
  Convenience store Open Audio playing and check if this helps solve the problem.
   
  Step 2:
   
  If this does not help, I would have you do this:
   
  a. Click Start, click Control Panel
  b. click on sounds and under "playback".
  c. right-click on "Speakers" and place a check mark on "Show disabled devices" and "Show disconnected devices".
  Now check if the speakers appear.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• sound in firefox stops after a while.

  restart help but sound goes away after, start a new thread because the closest has been archived

  The sound also stops YouTube videos a few times, but not all. Restart in safe mode does not help.

  Contact the support of the site and tell them everything.

  BTW, if you run the game without any other windows ...

• Multicast traffic stops flowing after a while when using IGMP snooping

  Hi all

  I have the following configuration:

  :

  Where host 1 is a multicast traffic source and host 2 is a customer of multicast traffic. IGMP snooping is configured on both switches.
  Host 2 boots and sends an IGMP report, in order to join the multicast host group 1. Given that SW2 does not know where the mrouter from the group, adds port Eth1/1 to the Group of snooping and removes the package, the IGMP packet. Once host 1 starts, it sends an IGMP query (which is flooded by the port channel), and multicast traffic starts to flow to host 2.
  When I ran 'show ip Mattia snooping groups' I've seen the same result on both switches: on the two switches of the groups the Eth1/1 and the channel port, but after a while, the switch connected to the host 2 deleted the channel of the port of the group.
  After consultation with the switch logs and sniff traffic on one of the channel port on SW1 interfaces, I came to the conclusion that happens since SW1 ceases to send queries generated by host 1 and responding to them locally (some proxy or something). I also noticed that IGMP reports generated by host 2 stop arriving on SW1 (since SW2 do not know that there a connected mrouter more across the channel of the port).

  My questions are:

  1. How does SW1 knows he should keep the channel port as part of the group, if it does not IGMP reports coming from SW2 more?

  2. what happens if the host 2 is not interested in multicast traffic, but do not send and IGMP leave message (a behavior that is supported according to the Protocol, to my knowledge)? How SW1 knows he should cease to IGMP sent from host 1 query response?

  Thanks in advance,

  Omer.

  Hello

  The problem is because you have not mrouter port sw1. It is well documented by virtue

  http://www.Cisco.com/c/en/us/support/docs/switches/Catalyst-6500-Series-...

  There are 3 ways you can solve this problem.

  1. enable Pim on Sw1.

  Or

  2. enable ip igmp snooping interrogator on Sw2

  Or

  3. create staitc mrouter port on sw2.

  ip igmp snooping vlan 1 mrouter interface PoX
  
  

• Why my files and folders on the desktop goes away when I stop or disconnect my computer?

  Why my files and folders on the desktop goes away when I stop or disconnect my computer?

  When I start my computer its message of shows like temporary file is retained and watch the preparing your desktop... can anyone find the answer?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this: http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Toshiba l.335 laptop screen goes black when you switch application - execute a file say yes or no to change requests

  I have a Toshiba L355 vista sp2 running Norton 360, when I want to run a file to install or make changes to something my screen temporarily becomes darker when the trunk opens to allow actions, then goes black after that I have accept or decline and goes back to normal when it is time to complete the application as a finishing facility. It wasn't a problem before installing sp2

  Might want to check for an update for your video driver...

• Why my monitor goes black after a minute?

  I have my standby power setting to turn off the monitor after 15 minutes when it is plugged.  But if I don't move the mouse or press a key for a minute, the screen goes black.  It's very embarrassing, especially if I watch a video.

  Is there another setting somewhere that says monitor going black after a minute of no activity?

  Thank you

  PAM

  Hi Pam,.

  Here's another setting worth it.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window, adjust the time before the screensaver kicks in the drop "Wait" to a more acceptable value.  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K

• Control of Toshiba Satellite A100: Buttons no longer work after the Xp update

  Toshiba satellite A100 iOwn and use Windows XP Edition family.
  After installation of windows update a few days ago from the functional buttons on the left side of the keyboard stop working - I can use the top running internet explorer or windows media player, but the other 3 buttons do not respond.

  I tried to run the system in the previous point, but it gives me error...
  Utility Toshiba for the buttons has been downloaded and reinstalled but still not result

  Download and install CCleaner tool. This windows registry repair tool. It s for free. Repair you the OS.
  Download the right modules common to you notebook series from Toshiba page, then reinstall it.

  After new control restart if the Toshiba control buttons functions!

• computer screen goes dark after few minutes

  original title: computer screen

  my screen goes dark after a few mimutes do I do

  Further information on what you mean exactly

  Make sure your computer is going to sleep

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Turn off a computer: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away.

  I have Microsoft Windows Vista Home premium, Version 6.0 (Build 6002: Service Pack 2), was Norton Internet Security. Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away. Perhaps because of my attempts to resolve this issue, some of my PC system has had problems, it became unstable, I've had several accidents that I got Norton 360, but it don't did me not the solution and stops working, I re installed Norton Internet Security. Please give some answers and advice on how to solve this problem, thank you.

  Hello

  You use a desktop or laptop computer?

  Is the mouse a mouse wired or wireless?

  What is the brand and model of the computer and the mouse?

  If you are using a laptop, I suggest to change the sensitivity of the mouse pad.

  If this is a wireless mouse it might be interference from another close to the mouse. Make sure that speech recognition is not enabled.

• Screen goes black after 15 minutes?

  Hello

  I plugged my Compaq 420 on my HD TV via a VGA cable.

  Now, I love watching videos of youtube on my HD TV.

  However, the screen goes black after about 15 minutes. So I have to move my mouse to bring up the screen again.

  I thought it was the standby screen so I changed the setting to 60 minutes, but still the screen goes black after 15 minutes of watching the video.

  If I move the mouse whenever a whilte (entry reachs 15 minutes) the screen becomes black ever so I move the mouse every time some time when I look at something more than the 15 minutes. but I don't want to get up from the couch every 10 minutes so please help change me the setting so that the screen is not black.

  In Control Panel > options, click choose when turn off the displayof power "on the left side of the screen and changing the settings Never to"on battery"and"Plugged in"

  

• HP DV6 NOTEBOOK AUDIO GOES OFF AFTER A FEW MINUTES, ENVY MUST RESTART EVERYTIME I USE LAPTOP

  HP DV6 ENVY LAPTOP PC

  Product number: C2L31UA #ABA

  8, 64-BIT WINDOWS

  Hi, my problem is that my audio goes off after a few minutes, then if I want it back I have to restart the PC and it seems in good condition, but imagine having to restart your computer after you have initially fed up whenever you want to use the PC. The Support assistant says that my drivers are up to date, that the problem may be due to the fact that I didn't have this problem until recently who told me that one of the automatic updates at the origin of this problem.

  In addition, a problem that has never set was my internet inexplicably drops for no apparent reason. Sporadic problem and has nothing to do with my connection as it has occurred in several physical locations. Open Internet explorer by clicking on 'fix the fitting' works after a few minutes, but it is only a band-aid solution.

  Any help would be much appreciated.

  Signed

  EXTREMELY FRUSTRATED AS MULTI BILLION 2 COMPANIES MICROSOFT AND HP IS UNABLE TO MAKE USABLE PRODUCTS. I GUESS THEY WANT PEPOPLE TO MOVE TO APPLE. SORRY FOR THE RANT. A SENSE OF DESPAIR.

  Hello

  On the audio issue, try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the update of KB2962407, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K