Toshiba TV 65L 9305 does not illuminate

Hi all, my 65L 9305 has stopped working all of a sudden. He won't wake up.

The TV screen is off, the power led is lit red in standby mode.

-by pressing the TV controls has no effect
-buttons on the remote control has no effect
-unplugged all but power, no difference
-When removing the power and put in, power LED lights green for 5 seconds then return blush and stay that way
-tried clearing of electrostatic charges by disconnecting the power and pushing the power button on TV for a minute, no difference

It is out of warranty a few months...
Anything else I can try?

Thank you!

I'm having the same problem and you can find absolutely no solution anywhere.
Warranty expired of course 3 months ago...
Cannot find any type of phone support either. I am very disappointed with Toshiba at this stage.
Can you find a solution since you posted?

Tags: Toshiba

Similar Questions

  • Toshiba 40 L 345 * DB does not illuminate

    Hi guys,.

    I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

    Any thoughts?

    Rgds

    Kedders

    Originally posted by Kedders
    Hi guys,.

    I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

    Any thoughts?

    Rgds

    Kedders

    Hi Kedders,

    I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.

    What's wrong?

    Kind regards

    Chris_UK

  • Satellite A300D does not illuminate

    Toshiba Satellite A300D does not illuminate

    The battery light is red when it is plugged in with the light of the white plug

    When I press the power button it lights up two other fires, and one that looks like a sheet a4 fact paper.it a vibration when turning it on also.

    Any help would be greatly appreciated

    Disconnect the power adapter and remove the battery.
    Leave the laptop unplugged and then hold down power button / stop along 30 sec.
    Then reconnect the two parts and check how the unit works.

    In which case nothing would be visible on the screen, try replacing the RAM modules. Perhaps one of the modules is the troublemaker
    Otherwise if the RAM modules are OK, the problem could be linked to the motherboard.

  • Equium A100 does not illuminate

    My A100 does not illuminate. Anyone have similar problems?

    I had a little trouble with the plug of the AC adapter into jack but have managed to get charged. When I put now the head in the light orange is on, but nothing else and it will not start.

    I would be grateful for any help.

    Hello!

    What problems have you had with the AC/DC adapter?

    In this case, you can do many things to get this working again, but you can try to remove the adaptor AC/DC and battery. Wait an hour and reconnect both devices and try it.

    If it doesn t work I think you will need help of an ASP. :(
    On the Toshiba site, you can search for the closest: http://eu.computers.toshiba-europe.com => Support downloads & => find an authorized service provider

    Good bye

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

    iPhone 6 with iOS9.3.4.

    WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

    You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

    Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

  • My MacBook Air does not illuminate

    MY MacBook Air does not illuminate?

    Nothing happens when you try?

    Power light?

    Tones? Startup chime?

    If you connect to the charger, which is LED color on the card?

  • iMAC does not illuminate

    MY iMAC, which is several years old does not illuminate

    Take the test/diagnosis. Nobody here can 'pull' hardware problems.

    Barry

  • 2009 iMac 21.5 does not illuminate

    My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

    Try to zap the PRAM or reset the SMC.

    Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

    Otherwise, take the model to your local store from Apple or a DAD.

  • New Ipod Touch does not illuminate

    Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

    Try the following steps:

    1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
    2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
    3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
    4. Be sure to contact the Apple support if you need more help.

    Good luck!

  • Satellite Pro C660 does not illuminate

    Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

    any suggestions?

    Hello

    On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
    After doing this connect the power running and try to start again.

    What happens when you do this?

  • Satellite L500-1DT does not illuminate

    My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

    You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

  • Satellite M30X-127 does not illuminate

    Hello

    Need help!
    My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
    The guy there offered my 100 pounds for to buy me.
    Please a little help. What should I do?

    Hello

    Otherwise you will search in ebay for the second hand with the good motherboard unit.
    Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
    You can try to use second hand motherboard in your laptop.

  • Toshiba Recovery Disc Creator does not work on my Satellite P300

    Hello

    I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
    I tried before, and he had a problem with the core files, saying he was corrupt.
    So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
    Cheers for any help
    Mikey

    Hello Mikey

    The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

    If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
    Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

    If you want you can test. Try to start the installation of HARD drive recovery.

  • Tecra M2 does not illuminate

    I'm working on this machine, and I am new to laptops.
    Client introduced, with only light, but the computer does not illuminate.

    I'm the battery charge with the strings that came with it and a wall socket in good condition. The indicator flashes yellow. I will continue to read the forums, but none seemed identical to that.

    I have download guide the user and the data sheet.
    The device seems intact, unharmed. Customer does not have knowledge of the condition/battery maintenance. Asked about this, he said, the wires are all here - and it is plugged.

    Thank you
    Nan

    Hello

    LED flashes orange?
    If you mean the DC-in LED if it flashes orange if the output voltage of the adapter is abnormal or if power outages.
    If you mean the Power LED so it flashes orange while the computer stops if you select sleep mode.
    If you mean battery LED if it flashes orange when the battery reaches a low battery indicator.

    I think you should check if the AC adapter has no malfunction and provide enough power.

    I think you should also try another solution that I found in this forum.
    So to remove the battery and unplug the AC of the laptop and wait form (10-15 min) then several times the battery and connect the AC to the laptop and try to start the laptop.
    Eventually, it helps.

Maybe you are looking for

  • HP G62-a20SE Memory Upgrade

    Hello Im confused here about that is the maximum memory could be? Based on the hp site it says Max Memory: supports up to 4 GB memory DDR3, but im looking on the internet, they also said that it can be improved up to 8 GB. I want to buy 8 GB memory t

  • LRT214 as a teleworker box

    Hello I try to use the LRT214 as a box of teleworkers that allows me to give employees the box that is pre-configured with OpenVPN and let connect you to our server running OpenVPN.    In this way, they can connect to the network without any problem

  • Cannot install update KB968930 or KB970158, error code 800F0900

    I have a problem installing these updates. They don't will not install and I believe that there are other problems with my computer. I constantly receive a security message that will then shut down the computer, also my McAfee will not scan it stops

  • Printer 4700 shows that it is the wireless. It will print not wireless. I used all the information hp

    Printer 4700 shows that its wireless, but it does not print wireless. Information for this set up has been tried seversl time and technical support have yet to fix. My router has inside and one ip address. Help would be a plus.

  • How many times did you put in a bad password before lockuout?

    I am writing a test for connections... I did not know if there is a hard and fast rule or what.  Does rely on time? Thank you