total size of the files of Windows 7 does not match the size of partition

In the D: partition

total space: 265 GB free space: 59.1 GB

There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

Of course free space does not match the file size.

Do not partition system, no problem to update windows and restoration, sleep or page file.

Some strange things:

1. with the help of file size 3.4 correctly see the size of the file

Daisy file occupies 206GB

Once I copied the whole file to the other partition Daisy

and the result is the record more like 2xxGB

so I guess that 206GB is the right size

/////////////////////////////////

may be ignored.

2 folder being read-only Daisy

Even uncheck or untick read only box in the properties of the folder does no effect

After loading, it still shows read only

3. 'read only' does not work

2, daisy file is read only

but I managed to delete files inside

////////////////////////////////

////////////////////////////////

Is it a mistake to folder structure?

It's a newly installed windows, so I guess that windows is clean

Hope to see the solution and identify the problem

Thank you very much

OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

No other information seems more relevant.

Ideas-

1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

Denis

Tags: Windows

Similar Questions

  • Firefox won't open the popup or when I do ' file > new window "it does not open it too.

    When I click on a link that opens a pop-up window, firefox does not open it. Ditto for "file > new window.» Then, often after Firefox starts to malfunction and won't open my favorites. I uninstalled and reinstalled firefox, removed all extensions... But this does not solve my problem. can you help me please?
    Excuse me for my mistakes in English, I am a French person and I try to speak English the best I can so that you can solve my problem. Thank you.

    This has happened

    Each time Firefox opened

    == I click on a link that opens a popula

    Your above posted troubleshooting list shows quite a few extensions.
    You have really turned off all the and still had the problem?
    See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

    What security (firewall) software do you have?
    Some may block pop-ups as well.

  • Download iso file of windows 7 does not give me the iso file. Help, please!

    so I bought windows 7 Home premium on discount for students. I received a confirmation email telling me to download either an EXE or ISO file. I decided to download iso, however, after I finished downloading and extracting the zip file, I got a folder (name X 15 65733) and inside does not contain an Iso file. Instead, it has a bunch of folders and files, one of them is called setup.exe. I click on the file setup.exe, which explain that the setup.exe is not a valid win32 application.

    so I can not upgrade my windows xp to windows 7 right now, let alone burn it to a dvd. can someone please? Thank you!

    The X 15 65733 file is the file .iso Windows 7 Home Premium image. You have to burn to a dvd as a bootable disk to install Windows 7.
    David

  • Unable to show a WMV file, because Windows 7 does not support the G2M4 codec

    I use windows 7 and I got a file wmv of my employer.  When I try to see I hear it but I can't.  The message I get is:

    "No decoder module appropriate:

    VLC does not support the audio or video format "G2M4". Unfortunately it is impossible for you to solve this problem. »

    Try to open in Windows Media Player and get this message "Windows Media Center cannot play the file because the required video codec is not installed on your computer."

    Tried to download the current codec installation package and I got the message "the program is blocked due to compatibility issues".

    Run the fixit from Microsoft to search for any missing codec and the report that came back that no codec is missing.

    Please tell me there is a way that this can be corrected.

    It might be worth a try to re - encode the. WMV file.

    In many cases, I found that convert a. WMV file
    to the. WMV format could produce a new version of the
    compatible file. Sounds redundant, I know, but it
    can work.

    Microsoft Expression Encoder 4 can perform the conversion.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601

    +++

    If you want to try Expression Encoder 4 following
    info can be useful:

    Start Microsoft Expression Encoder 4
    (Start / programs / Microsoft Expression /)
    Microsoft Expression Encoder 4)

    On the "Load a new project" screen...
    Left click... "Transcoding project '...

    When the program opens, click on... File / import...

    Left click (highlight) the. Left and WMV file, click the Open button.

    You will see the file in the "Multimedia content" pane

    In the right column... left click on the tab "Output"...

    Open the drop directory window and choose an output folder.
    (This is where you will find your converted file)

    On the left, click on the button "encode".

    Wait... video encoding CPU intensive and can
    be a slow process. It is always best if you do not have
    multi-task while files are encoded.

  • FILE EXPLORER Windows 10 does not work

    I upgraded from windows 7 Home Windows 10. Everything worked for three months. Now my file manager does not work. If I double click on a shortcut, nothing happens. No message or errors, no feedback at all. If I select file from the menu 10 windows Explorer it lists recent locations, but if I click on anything that it is once more the window closes and no feedback of any kind. To access my files, I have to go well as the search for application files. Is no more, I can add folders or improve my organization of files. Of course he used to work so I guess it has become corrupt. What do we do to fix this problem, I see, it is a common problem in looking at the forums for microsoft, but no one said a suggested fix worked.

    Hello

    Here what's new on the win10 File Explorer:http://windows.microsoft.com/en-in/windows-10/getstarted-whats-changed-in-file-explorer

    And here is the solution:

    The service is called Windows search and disabled once it provided functionality in the file Explorer. The search function in the file Explorer works but isn't looking in the taskbar.

    Step by step guide:
    1. hold Win + r to open the run
    2. type msconfig and click ok or enter
    3. click on Services
    4. go to Windows search (you can sort the list in descending alphabetical order)
    5. clear the check box
    6. click apply then ok
    7. Select restart now

    I hope it works for you.

  • Missing DLL files. Windows Update does not work. Manufacturing installation of Xp home Sp3.

    I inherited my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I'm NOT have a disk to reinstall. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.

    I was told "running" sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.

    So... How can I reapir my Xp home without the disc?

    On Monday, December 6, 2010 20:55:18 + 0000, janiflower wrote:
     
    > I inherited from my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I don't have a disc of resettlement. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.
    >
    > I was told 'run' sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.
    >
    > Then... How can I reapir my Xp home without the disc?
     
     
     
    If I bought a used computer, no matter who previously owned the
    first thing I could do with it would be to reinstall the operating
    system itself. You don't know how the computer has been maintained,
    which has been improperly installed, what's missing, what virus and
    There may be spyware, etc. I would not live with someone
    other errors and problems, possibility of kiddy p0rn, etc. and I
    would not recommend anyone else to do.
     
    If you reinstall Windows properly, you are playing with fire.
     

    Ken Blake, Microsoft MVP

  • Recovery of files of Windows 7 does not work.

    He used to work.  I click on backup and nothing happens.  No matter what I click on the windows backup page 7, nothing happens.  Turn the calendar does not work.  It does not change the settings.  Even the section of restoration does not work.  Help me solve this problem.

    Hi Richard,

    You did changes to the computer before the show?

    Please follow the methods to check if they solve the problem:

    Method 1: Scan SFC Run in the computer

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

    http://support.Microsoft.com/kb/929833

    Method 2: Check if the Volume shadow copy service and windows backup are running and set to automatic in the Services Console.

    a. Click Start, type Services in start search. When the page is open, scroll down to find the instant cliché service Volume and the backup.

    b. right click on them and check if they are started.

    c. If the services are disabled, start services and set it to automatic and check if the problem is resolved.

    For more information on backup, please refer to the links:

    Should what backup settings I use to maximize my disk space

    http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

    Backup and restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

    Please report if you are still having the problem. I will be happy to provide you with additional options.

  • Search for content of a file in Windows 7 does not work. What I am doing wrong?

    I read a bunch of messages on this website, as well as others, on the way to search for content in a file. I followed the instructions, but it does not work for me.

    As I understand it, if I'm looking for a file containing the word 'pelican', I must type

    content: "Pelican".

    It does not work.

    I also read that it speeds up the search if I turn on indexing. This is not feasible because there is more than 4 TB with a value of files on my company's server and indexing is apparently intended to apply only to files that are frequently used in areas that are frequently used.

    I guess I'm doing something wrong, because I've seen post this question even others and tell then the answer has worked for them, but it does not work for me.

    Any help would be appreciated.

    Just type Pelican in fact, content: is not necessary.

    If you do not want to reserve a site indexed, there is an option that you can set to make a slow files manual scan (although it might take hours or days or weeks for the search engine to open and analyze inside 4 TB with a value of files over a slow network connection.  I hope that the server is indexing on, even if you do not have.  If this isn't the case, you'll be sorely out of luck.

    This setting, I've mentioned is here:

  • Restoring files of Windows Vista does not work - I have tried many, many things. Help, please.

    Hello

    I did a windows vista upward from some directories of laptop for my ReadyNas Storeage via the network.  The backup is is about 8 times before the hard drive on the laptop crashed.  We are unable to recover the HARD disk for thought I would recover from the laptop.

    Here's the problem:

    I use Windows Restore - Advanced Restore to try to recover from the previous backup.  After some fiddling, I am able to see that the program of restoring Windows backup sets.  I'm trying to restore all files to their original location.  The restoration done some preparatory work and then get the error message: Restore did not complete successfully. Error code: 0x8100001A

    Here is what I tried:

    (1) find the original Mediaid.bin file and copy it to the root.
    (2) run the following process to rebuild the mediaid. http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/56f5ed9b-8722-4fa8-b1e9-9c17d7132feb.
    (3) have successfully used windows Explorer to extract a single file.  (backup stuff windows are stored in zip files).  Problem, this only works for files below a certain size because I don't know how to merge files voluminous back.
    (4) copied the backup set off the ReadyNas to a USB to load from there.  It worked only when the USB, I have shared on the network.
    (5) have shot a question at JustAnswers, but they have not as well.
    (6) tried to restore a previous backup set but also failed with the same error message.

    Any help would be welcome.

    Thank you

    Hello

    for similar issues, see the links below and check.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/b489c071-cb79-4893-8942-188e20ed6f09

    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/5e368f95-5142-4B9F-AFB2-ccff9b646433

    http://social.answers.Microsoft.com/forums/en-us/w7network/thread/d7717978-290A-4f29-8e2d-5f6de0ebe0ff

    It will be useful.

  • Opening of more than 15 files with Windows Explorer does not work.

    Under XP, I used to be able to open several files in Notepad, at the same time. Now with Windows 7, I am limited to 15. Is there a way to make Windows 7 behave like XP in this regard?

    This is incorrect. There is always a way, here is the solution: http://support.microsoft.com/kb/2022295/

  • Why windows search does not return a result when the file is of course in the folder my documents?

    Hello

    file search: KeyScrambler_Setup.exe
    search string: key - would find the above file
    search string: scrambler - cannot find the file!

    now I'm very confused. can someone pls tell me why? then I could correctly search and find my next record!

    Thank you! any help is appreciated!

    BTW I use win vista Home premium 32.

    and I tried the advanced search and selecting search loc: informed everywhere and all the other search criteria.

    Hello

    Windows Search does not work or research are slower
    http://support.Microsoft.com/GP/windows_search

    Troubleshooting Windows Vista search & indexing errors
    http://www.WinVistaClub.com/T24.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

    * Original title: Question of re-Installation of operating system.

    I got the message during win 7 / Win 8 installation.

    "the file is maybe damaged. the file header does not match the checksum calculated.

    My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

    I have also replace Win 7 DVD and DVD player also replaced.

    I also reinstall my single RAM chip so many times. but the problem still exists.

    During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

    Pls help me Sir, I would like to Win7 in my computer again.

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

    Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

    Method 1:

    Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

    M odes 2:

    If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Method 3:

    In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • Windows 7 in 'Récent' has customdestinations the files of ms which does not open

    Windows 7 in 'Récent' has customdestinations the files of ms which does not open.  Does anyone know if Microsoft has a solution showing how to open them or any other solution?  Thank you!

    [Original title: GeorgiaFH]

    Hello

    See:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Win7-is-a-file-called-custom-destinations-legit/0a695631-7395-41DF-A397-f22c046c790b

    Don

  • I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

    I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

    Hello notnewbee,

    Thanks for posting on the Microsoft answers Forum.

    You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
    you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

    If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
    The information below will show you how you can make older programs run on Windows 7 here.

    If please reply back and let us know if this helps solve your problem or if you still need help.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

    I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

    Now, I get the message:

    "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

    As I understand it, that does not affect really any other files, they rely on the spot (I think), but

    HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

    Thank you!!!

    Try to be...

    SereneJulie

    Hi serene,

    Thanks for posting your query on the Microsoft Community.

    As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

    • Create missing files that are listed in the error message.
    • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
      1. In Control Panel, open backup and restore.
      2. In the section back up , click change settings.
      3. In the dialog box Configure the backup , click Next.
      4. In the dialog box that you want to save , click Let me choose, and then click Next.
      5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
      6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
      7. Click Next, and then click Save settings and exit.
      8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

    If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

    http://support.Microsoft.com/kb/973455/en-us

    Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

Maybe you are looking for