Totally confused about error message when you save the model.

Similar Questions

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

  I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

  If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

  Anyone know what it is?

  Photo of the message is attached.

  I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

  I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

  You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• Error message when you open the project.

  Hello

  I get an error message when I try to open a project in which I worked on these last two weeks.

  It looks like this:

  

  Some tips on how to run again, or am I screwed?

  I tried to restart Captivate and the computer. The file is not an attachment and I worked on it every day the past few weeks, worked very well. Available disk space is still left, so shouldn't be a problem either.

  Any help is appreciated.

  Kind regards

  Patrik

  I was referring to the preferred option in Captivate to create backup files.  Have you had this market?

  

  Working on a LAN on any project file Captivate is not recommended because a glitch in the network traffic for a backup action can damage your project file.  Maybe it's actually what happened in your case.

  When you say "only saving the file on my hard drive" do you mean that you have saved the project file on your hard drive before you open it whenever you work on it?  If so, it is strongly recommended.

  Look to see if you have a backup of your file version (look in the same location as the project file and see if you have another file it is about the same size with the same name but the backup on the end).

  Is there is no backup file and then you can restore the project using the cache of Captivate files.

  See this link for instructions on how to do it:

  http://blogs.Adobe.com/Captivate/2010/09/recovering-the-project.html

• Error message when you add the account to TimeMachine

  Hello

  I get the error in system.log when I enter my account information to access a drive for time machine below

  System.log:Feb 14 11:31:04 iMac - 5 K sandboxd [133] ([25623]): kcproxy (25623) political system: deny /Library/Keychains/System.keychain file-writing-untie

  The above error appears when you use access Keychani to run the add-in, when I use the route of the control panel to add I get a slightly different error

  System.log:Feb 14 11:19:12 sandboxd iMac - 5 K [133] ([465]): writeconfig (465) political system: deny /Library/Keychains/System.keychain file-writing-untie

  So it seems to be a sandbox configuration problem?

  Keith

  What functional problem you have, if any? Log messages are not a problem in itself.

• "Driver not installed successfully", the error message when you use the new MP3 player.

  I recently bought a Sony Mp 3 (model NWZ-E384) Player.

  When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

  Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

  Is there a round work to install the device driver on my PC?

  Thank you very much

  Ian

  Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• Problem with the evolution of the links when you save the model.

  What I have:
  Establishment of model in the "Templates" folder in the root of the site. In this model, there is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
  
  When you create the new file based on the current model links the first kind to "pic/tran.jpg" transformations and second - "file:///Y|/home/3dsfera/pic/tran.jpg".
  
  What I have to do? How to preserve the original links in file created on the basis of the model.

  If the links are correct in the model, based on where the model is
  located, so they'll be correct in the pages of the child, anywhere
  within the site save you. DW will manage these links for you.

  If you see the absolute link 'file' persist after the registration of the child.
  It may be because of one of these.

  1 DW think that you linked to a page outside the local root
  folder, or
  2 DW think you have saved this page outside of the local root folder

  Did you one of the people?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "firefoxer_d" wrote in message
  News:g5vj0s$EBJ$1@forums. Macromedia.com...
  > What I have:
  > Creation of model in the "Templates" folder in the root of the site. In this model
  > There is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
  >
  > When you create the new file based on the current model links of the first kind
  > changes in 'pic/tran.jpg' and second-
  > 'file:///Y|/home/3dsfera/pic/tran.jpg '.
  >
  > What I have to do? How to keep the original links in file created on the basis
  > of
  > model.
  >

• Error message when you save a file in DW - CS6

  When I go to save a file in Dreamweaver CS6 using Windows 7,

  I get this error message.

  "When executing onLoad in bc_afterSave.htm, follwing javascript errors occurred"

  In the file "bc_aftersave.htm";

  OnLoad is not defined

  Everything was going well for years now, I get this annoying error message. Saves the file, but the error message still appears.

  I use Adobe Application Manager and get my software through the cloud of Adobe.

  I tried to delete the configuration file waiting for th DW would automatically create a new one, but that didn't work.

  I would not have to uninstall and reinstall DW because I have dozens of sites I need to reconfigure

  Any help with this?

  bc_aftersave.htm is a file that is located in the controls Configuration of Dreamweaver. Is generally required when you work with Business Catalyst.

  The error you see may be due to a faulty file.

  I enclose the offending file - "bc_aftersave.htm" in this thread. Download and restore it in the following folder:

  C:\Users\\AppData\Roaming\Adobe\Dreamweaver CS6\\Configuration\Commands

  Locate the bc_aftersave.htm file, replace this file with the one that I join here to see if it solves the problem.

  -ST

• Error message when you use the DVD player

  I have a Satellite P200D and whenever I put a disc any in the drive I get an error NON-DISQUE when I eject the disc. I always make sure I close all programs relating to the use of the disc before you try to take out the drive. It is a new problem that I used the laptop for a few months with no problems at all. The text of the error message is below. Pointers would be appreciated. I can live with that, but it would be nice not to have to.

  Exception Processing Message 0xc0000013 0x764C023C 0x8E4A1B6C 0x764C023C 0x764C023C settings

  OK, if you try to exit the disc using the eject button on the side of the laptop, why not try ejection through windows software.

  To do this right-click on the dvd drive in my computer, then click "eject". This could mean windows that its ok to let the player go now.

  Another solution would be to save all the important data to another drive, and then put the laptop "out of area State" by using the recovery disk. I would say that the problem will disappear.

  However, if problems persist, please consult your place of purchase for a check up.

  Good luck.

• Error message when you install the printer driver

  First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

  My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

  Windows found driver software for your device but encountered an error trying to install it.

  In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

  If you know the manufacturer of your device, you can visit their website and check the support.
  My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

  Please sent me useful information.

  Thank you so much.you sent slove my problem how.

  It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
  step 1:
  Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
  step 2:
  Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
  step 3:
  I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
  step 4:
  I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
  I hope this answer helps anyone with a similar problem.

• Error message when you set the supervisor password

  When I try to set a supervisor with Toshibas utility password password I get the following error message: "Set Supervisor Password function Fail!"
  Why is it not possible to set a supervisor password? I have not yet defined any other password.

  Clean U940 preinstalled with the factory settings and minute ago I ve tested supervisor password. Password has been saved successfully and without any error message.

  Have you tried to set the supervisor password in the BIOS settings directly?

• HP pavilion dv7: error message when you use the recovery disk

  1Meilleure opportunity disc ok, 2 used and 74% and error message copy file fails to d:\preload\base17. WIM c:\RM\IMAGE\base17. WIM. What should I do now.

  It just sitting there so I'm out of it and then when I turn on again it says that it finished so I click done and then I got error missing Boot Manager.  You even insert the other disc driver and application recovery cd.  What should I do now.

  Thank you

  Update: test complete HDD to 100% test passed, smart check successful smart hard drive