Touch pad is enabled but does not work

I have just this minuet reinstalled Win XP and the touch pad does not work and I can't work out what is coursing this problem...
The console Toshiba says that it is turned on, but it does not work? Help!

p. s.

I bought 512 MB RAM for and I can not go...
Any help would be grateful.

Thanks dazmo b

This way I can just say allows you to check the touchpad settings and the FN + F9 key combination.

The subject of memory upgrade, I can't tell you another much because I don t know what model of laptop you have.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite W30T-A378 from - touch pad and the keyboard does not work

    I have a problem with my laptop, the touch pad and the keyboard does not work.
    Can someone help me what is the possible cause?

    Thanks in advance.

    Hello

    I guess you checked if the Tablet has been properly connected to the docking keyboard.

    Have you tried to unplug and plug the docking again?
    Note: there is a latch on the left you have to move and in order to remove the tablet.

    Perhaps there is a connection problem.

  • Portege R930 - Touch Pad on / off button does not work

    Hello

    R930 nine (PT330A) and a minor but annoying thing... the small button above the touch pad and below the space bar for the Touch Pad on / off does not work. I can't find the configuration options for this anywhere. Fn + F9 works very well.

    Not much, but I like things to work! And this button would be very convenient for a quick switch.

    Thank you
    Mark

    Can you use the Toshiba? I think you should have the button eco and presentation on this machine.

    Check please if you can enable/disable these keys in the HWsetup tool.
    I don t have Win8 machine, but I think that all these buttons can be enabled/disabled.

    Please, check and send comments.

  • Touch Pad Mac Book Pro does not work since the 10.11.3 update

    My touch pad does not work since the update of El Capitan 10.11.3, y at - it nothing to do with this update or is this a hardware problem?

    Mouse Magic Mouse and USB work correctly

    Try SMC and NVRAM resets:

    https://support.Apple.com/en-us/HT201295

    https://support.Apple.com/en-us/HT204063

    If no success, make an appointment in an Apple store genius bar.  The assessment will be FREE.

    Ciao.

  • Search suggestions is enabled but does not work?

    The search bar in the "Awesome bar" has recently ceased to offer suggestions from research or from my search history Google itself. When I control-click in the search bar, "search suggestions" has a check mark next to it, and it is also checked in the preferences.

    I have re-set network.http.speculative - parallel-limit to 0 and then put in 6 and 10, with no difference. Restart the browser makes no difference.

    Browser.Search.Suggest.enabled = true
    Browser.urlbar.Suggest.Bookmark = true
    Browser.urlbar.Suggest.History = true
    browser.urlbar.suggest.history.onlyTyped = false
    Browser.urlbar.Suggest.OpenPage = true
    Browser.urlbar.Suggest.Searches = false

    I had problems with Javascript it just seems to stop functioning after the browser has been running for awhile on updates several last, affecting things like comment on some sites, menus based on Java doesn't work, etc, but I don't know if that would be linked to this problem. A reboot does not fix things in this case, at least not today.

    Try to clear cookies from Google.

    Do you have any suggestions if you type in the address bar or do you find no in the drop-down list at all?

    Have you checked the prefs to browser.urlbar to see if any are user defined (in bold)?

    • browser.urlbar.maxRichResults
    • Browser.urlbar.AutoComplete.Enabled
  • Qosmio G50 802.11n enabled but does not work properly

    Hello

    I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

    -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

    can someone help me?

    Greetz

    Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

    Access device wireless LAN settings in Device Manager to change these settings.

    Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

  • Status of the scheduled task is enabled but does not work

    Hi all

    I wrote a work for sending mail every Friday at 10:00 and 16:00 hrs. Its status is active, and now at 13:00 hrs, the work shows that he has executed once, bnut I got no email now and shows execution next as 16:00 hrs. It shows 0 as no. failure time.

    When I run the stored procedure "WEEKLY_REMINDER_MAIL", it runs successfully and I get the email.

    What could be wrong?

    Thanks and greetings
    Umer
    Start
    dbms_scheduler.create_program
    (program name = > 'PRGM_MAIL',)
    program_type = > 'procedure_stockee ',.
    program_action = > 'WEEKLY_REMINDER_MAIL ',.
    enabled = > true,
    Comments = > 'Defining Program to send mail.
    );
    end;


    Start
    -perform all Tuesday at 10:00 and 18:00
    dbms_scheduler.create_schedule
    (schedule_name = > 'INTERVAL_EVERY_FRI_1000_1600',)
    start_date = > trunc (sysdate) + 10/24, - this was given Thursday
    repeat_interval = > ' FREQ = DAILY; BYDAY = FRI; BYHOUR = 10, 16;',
    Comments = > ' length: run every Friday at 10:00 and 16:00 ");"
    end;





    Start
    -Connect the two parts of dbms_scheduler creating final employment
    dbms_scheduler.create_job
    (job_name = > 'JOB_SEND_MAIL',)
    program name = > "PRGM_MAIL"
    schedule_name = > "INTERVAL_EVERY_FRI_1000_1600"
    enabled = > true,
    auto_drop = > false,
    Comments = > 'Job to email twice in the week');
    end;
    Published by: Nice1 on June 15, 2012 12:16 AM

    Published by: Nice1 on June 15, 2012 12:17

    Please take a look at {: identifier of the thread = 2393201}, that's your problem too maybe.

    Kind regards

  • my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

    my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

    Hi dove2k,

     

    Welcome to Microsoft Answers Forums.

    You will need to enable the touchpad on the laptop itself.

    Find the area of the touch pad, you will find a button to enable or disable the touchpad.

    If the step above doesn't, try this step.

    Go to control panel > mouse > device settings tab
    Click (or to disable)

    Notes:
    On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
    You can click on Reset device if none of these solutions work.

    If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • X 220 tablet screen type indicates that (and touch the problem of entry / does not work)

    Hey everybody. I have a question since lenovo seems to lack a complaints when it comes to this. I bought a used X 220 and can not identify whether she should be multitouch or pen of entry only on models. Screen part number is (according to lenovo page):
    04W3462

    Model number is 42962WU

    Touch screen with your finger does not work (if any).
    I don't have a stylus (pen) currently since she was not provided with the laptop BUT:
    Said property windows: no pen or touch input is available for this view.
    Reinstalled windows freshly twice as well as drivers (once downloaded manually, twice used Lenovo system update)

    Says always the same and there is no tablet or pen and touch settings in Control Panel.

    In some other subjects, someone suggested a similar problem as solution installation wacom pen drivers, lenovo Digitizer drivers etc.
    Tried the drivers provided and with each driver throws the same error: a Tablet supported is not found on the system

    Maybe there detect pen close to the laptop and it should be good?

    A I just got scammed?

    Thanks a bunch!

    For all of you who have the same problem, it's a hardware problem (motherboard).

  • Filters Photoshop CS6 Gallery is visible (not grayed out) but does not work.

    Filters Photoshop CS6 is visible (not grayed out) but does not work.

    I opened in 8-bit RGB jpeg.

    I can use the options of fluidity and blur, but nothing in the Gallery of filters (for example cutting).

    I am running on a MBPro CS6, recently restarted, 16 G of RAM, OSX 10.11.1

    I get no effect for smart objects or rasterized jpegs.

    You will notice the cut filter is selected, but has no effect on the picture.  There is no error message.

    It looks like I could use the filters a month ago.

    Thank you.

    Jeff

    Screen Shot 2015-12-14 at 10.42.37 PM.png

    The preview is enabled.

    Click just to the left of the opening.

  • Xfinity toolbar enabled but does not appear on the screen

    My Xfinity toolbar is enabled but does not appear on the screen. Tried to turn it off, remove it and add it back, but no luck. There is a space in which it above my Norton toolbar but it's only this - space. How can I make it reappear?

    Problem has been resolved by downloading a new version of the Comcast toolbar. They use to automatically update this bar tools, but for some reason stopped mines updated. But problem is now solved by this new version, the toolbar is now visible on the screen.

  • When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

    When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

    Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

  • Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

    Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

    Hi mayortom,

    Thank you for visiting the Microsoft answers Forum.

    You can follow the steps outlined in the article below:

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
    http://support.Microsoft.com/kb/910339/

    I hope that helps!

    Thank you and best regards,
    Abdelouahab Microsoft responds to the technical support engineer

  • Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

    I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

    LIFT, DRAG, THRUST and GRAVITY










    If I run it on a machine with Win 7 there is no problem.

    Richard Grosser

    Hi Richard c. Grosser,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

    http://social.expression.Microsoft.com/forums/en-us/categories

  • Tax Turbo installed but does not work on Windows Vista

    Tax Turbo installed but does not work. He says"this file does not have a program associated with it for performing this action. I don't know what the problem is. Exchanged the software still does not work.

    Sometimes, says "Application not found" program seemed to install and icon is on the screen, just at the moment where I got to run the program, it does not work and says it's "shutting down".  Any help?

    Have you ever successfully run this program on your machine?  So the system restore helps you, if if he was running very recently.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
    http://support.Microsoft.com/kb/936212/#appliesTo

    Which edition we talk to TurbTax, anything earlier than 2006 may not be not fully compatible with Vista?  64-bit versions may not be compatible at all?

    Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?

    The program will run in Mode safe?

    Vista advanced boot options
    http://Techblissonline.com/Vista-advanced-boot-options/

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    Problems with the launch of other programs via shortcuts on your desktop?

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

Maybe you are looking for

  • Portege M300 Recovery Disc Creator - where I can get it?

    I have a Toshiba Portege M300 and if I understand correctly, it came with a recovery disk creator, but I seem to have lost this program. Where am I able to get this again, I don't see not listed on any of the Toshiba support Web sites?

  • Noise when an e-mail is received

    I would like to activate a sound when a message arrives in my Inbox, is - it possible?

  • WRT610N - Wake Up Lan

    I have a question on the WRT610N router. Is a way to wake on lan go trough my router because now it blocks the wake on lan. I added my computer in the DMZ. I have my computer an assigned IP address Wake on Lan works local passing Thanks in advance.

  • Synaptic touchpad does not work

    I get this message when I try to fix my touchpad: "Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem is code 24. » Description:Windows was able to successfully

  • Pavilion 23-h024: can I Bluetooth on this pavilion smart touch

    I can't determine if that computer has BlueTooth added as standard. If it is standard how do I turn it on? If this isn't how to make BlueTooth enabled on the PC?