Touch pad stopped working Satellite Pro R850-143

Similar Questions

• Keyboard and touch pad stopped working on Satellite L750

  My laptop L750 keyboard and touch pad stopped working on start up. I now use a USB mouse and on-screen keyboard to do anything either. I have tried several things to fix, but nothing seems to work.

  I've updated keyboard drivers, tried related work key, updated and run antivirus software and restored to a point in time before the show. Still no luck.

  Any ideas?
  Thank you

  Keyboard drivers?
  Can you please send the link to download? It is unclear to me that the own keyboard driver.

  In any case, can you use keyboard and touchpad if you start the operating system in safe mode?
  Are you using the original pre-installed OS that you got with your laptop?

• Equium L10 - touch pad stop working (mouse)

  Hi guys,.

  really need your help. I have an Equium L10-300 and my touch pad has stopped working. A few days back, he started to freeze, but reboot solved the problem... but now it has stopped working all together. The icon that normally indicates at the bottom right of the screen disappeared. Have done the FN9 thing and tried to look at the settings...

  Help, please

  Thanks, Pete

  Hi friend

  have you already tried to remove the mouse from the Device Manager? Or reinstall the driver would also be a very good attempt to resolve this situation as a whole.

  The first step that needs to be done is to exclude a software error, then go-> http://eu.computers.toshiba-europe.com/-> support downloads & -> support-> download home page-> download drivers

  Get the driver for your mouse and reinstall. If it shouldn´t work then come here and we will see what could be the next step...

  Welcome them

• Satellite Pro R850 - 143 Windows + Tab button does not work

  In Windows 7, there is a feature that when you combine the Windows key and the Tab key it will be spool through open programs in a sort of 'Apple' passage.

  I used to be able to do this with my old laptop running windows 7 but, why impossible with my nice new Toshiba?

  You need Aero (interface 3D) enabled for this feature, which requires the correct graphics driver. Do you have the factory pre-installed Windows installed?

• Touch-pad stopped working immediately after the automatic windows update

  I was using my computer last night and have downloaded an automatic update of windows, so I restarted my computer so she could install the updates and as soon as updates when installed my work key touchpad stopped. Toshiba Satellite A215-s7472. I plugged in a usb mouse and it works very well.

  Visit the Web from Toshiba site to download and install the latest driver for the hardware device to your system.  They should be your source for such things.
   
  For all this Satellite A215-S7472 to main download link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1854772&RPN=PSAELU&modelFilter=A215-S7472&selCategory=2756709&selFamily=1073768663
   
  You did not specify a level of operating system/architecture - so you can the menu drop-down, select the categories appropriate here. ;-)
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Satellite Pro R850-143 won't matter to some CD in iTunes

  It really starts to bug me as @ 25% of the CD, I'm trying to import into itunes won't matter - I never had this problem with my old laptop.

  Hello

  Are you sure that this is unrelated to the iTunes software?
  Are you able to play music from this CD or other CD (disks)?

  Have you tried reinstalling iTunes?

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• Satellite Pro R850-15F - freezing randomly and the fan speeds up

  Hello

  I have a Toshiba Satellite Pro R850-15F who gave me four years in refurbished condition and so it is quite old.
  I have recently installed Windows 10 and things seemed to work very well.

  However, last week, I noticed that at least once a day my laptop freezes randomly and immediately the internal fan accelerates, becomes much stronger and a cold air. Whenever this happens, I turned off the laptop and turn it back on it.

  After that, it works normally again until the next time it freezes. I don't know anything about computer hardware, but I suspect that it is a problem of series and I wanted to get some advice in case my laptop is close to dying.

  If anyone has any help or advice or suggestions to solve the problem, then I would be extremely grateful if you would contact me.

  Hope to hear from someone soon,

  Flashback

  On this virtual path, it is not easy to say what the problem is here. To me, it looks like problem with some background process that as a result of extremely high CPU usage that locks the phone whole.
  High CPU usage means more heat in such situation the fan starts to run a lot faster.

  Have you noticed this behavior with a specific action or the use of certain applications?

• How to reinstall the DVD on Satellite Pro U300-143

  Hello!

  I have a toshiba dvd player uninstall by mistake! How can I install it again? are there options other than the pc recovery?

  I m using the satellite Pro U300-143 with windows vista busines

  Thanks in advance

  Hi Jan

  Please try with the link given by Robin. If this does not work please post again.

• My touch screen stopped working.

  Original title: I have a Gateweay all-in-one touch screen running windows 7 Home premium amd ie9. My touch screen stopped working. How to restore this function?

  I tried the system restore, I ran my anti virus several times, I 'googled' the problem. A rental offer advice for $38! I don't have thirty-eight dollars. Can anyone help?

  Hello

  1. did you of recent changes to the system before the show?

  2. What is the number of the model of the computer? 

  Also, I suggest you to visit the links below and check if it helps.

  http://gateway-us.custhelp.com/app/answers/detail/A_ID/11564/kW/touch%20screen/session/L3RpbWUvMTMyMzE0MzQyNy9zaWQvc2tQMWlUS2s%3D

  http://gateway-us.custhelp.com/app/answers/detail/A_ID/6763/kW/touch%20screen/session/L3RpbWUvMTMyMzE0MzQyNy9zaWQvc2tQMWlUS2s%3D

  http://gateway-us.custhelp.com/app/answers/detail/A_ID/6762/kW/touch%20screen/session/L3RpbWUvMTMyMzE0MzQyNy9zaWQvc2tQMWlUS2s%3D

  I hope that helps!

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Satellite U840T-103 - touch screen stopped working

  Hi, I have a Satellite, U840t-103.

  The touch screen has stopped working earlier.
  I don't know why.

  I think I have been juggling the project button, but I still can't get it to work again.

  Help, please.

  Hello

  Touch screen don't need any special driver of Toshiba.
  The driver is already part of Windows 8 / 8.1
  That is why I don't think there is a software problem, but of course, I would recommend you to retrieve the computer laptop back to factory settings using the Toshiba recovery disc just to check if this procedure would allow the touchscreen feature once more.

  This is a first common procedure in case something bad would happen to the laptop or the system.

  But if the system recovery doesn't help, the laptop must be verified by the service provider allowed for possible hardware malfunction. But let's hope, the recovery procedure would solve your problem.

• Satellite Pro R850 - 18K - use of the combined headphone/microphone jack

  This laptop has a combined microphone/headphone plug, but I couldn't find on the helmets of the market with 4 Cinch works correctly. I have some headphones mobile with 4-pole, but if I plug it into the laptop socket, both internal microphone. and the headset. stop working.
  According to manual it work!

  On my previous Toshiba I used 2 catches headset (red/green sheets), but if I connect it to the Pro 850, micro internal. will not work.

  Can someone recommend, what type of headphones, I need to take care to be compatible with the model R850?
  -USB connection should be good?
  -the so-called plug 4 pole should work, if not cell phone accessory?

  If someone has already solved this problem, please advice me. Thank you.

  George

  Hello

  Yes, according to the user manual, you must use a 4-pin headset to get the headset working.
  If you use any other prang 4 pin two mic (internal and external) would be disabled.

  > On my previous Toshiba I used 2 catches headset (red/green sheets), but if I connect it to the Pro 850, micro internal. will not work.

  I guess this pin 2 pin will not work in this case because the laptop supports only one taken headset.
  So, what do you think about using a 4 - Pin to 2 x 3-Pin 3.5 mm Headset Splitter Adapter like this:

  

• Tecra A3X-112: Fn + F1... Touch pad to work stoppage

  Hello everyone,

  I have a Tecra A3X-112 on which Windows XP has been recently reinstalled.
  I installed Windows XP before with other different copies, but this is the first time that I've known a few misadjustments.

  My problem is that the combined with F1, F2... Fn keys stopped working, as well as Assist bottom on top of the keyboard.
  In addition, the touchpad works, but I cannot turn it off.

  I've been looking at the posts of some other users, and it seems that it is a problem to download the proper drivers from Toshiba Web page.

  My question is: what drivers for the keys?

  a. for * Fn + function keys * should I intalled * utilities * or * Hotkeys utility for display devices? * There are even some users who recommend to installed a BIOS update or a common Module driver, but I'm not sure about this. By installing the appropriate driver, are all combinations FN + function keys work, or only some of them?
  b. for * Touch Pad *, should I intalled only * Touch Pad on / off utility * or * Touch Pad Driver * is also necessary?
  c. for * help the bottoms? *

  Send me the answers, please.
  Thanks in advance for your help.

  Hello

  The features of FN keys depend on several different factors. As a first step, it is important to have installed common modules. She is named for the other Toshiba designed tools and utilities.
  Just for example: for the use of the keys FN + F2 (standby power options), you need to install modules common and tool watch.
  While the first step I recommend to install common modules again.
  When you are finished, check the functionality of the FN and post the result.

  For FN + F9, you need to install TOSHIBA Touch Pad on / off Utility. Before that, it must be installed ALPS Pointing - device Driver.
  You know, it's not easy to simply offer a solution to this. All the drivers, tools and utilities must be installed in order to good facilities. After having done that, everything should work well.

  One thing, to help buttons try with TOSHIBA controls again.

• W700 wake from sleep or standby long, paved model touch completely stop working

  After having used the w700 less than a week, I found another problem on the laptop.

  I'm not sure it's a problem hardware or software, if someone has the same experience as me.

  Please give me some advice: is it a common problem or what else?

  A moment where the operating system, close the form or click sleep or hibernate with touchpad (touchpad with shifts two keys are completely work now).

  Re-open the screen, laptop alarm, the touchpad, including down to the left and right keys then completely stop working right now. I have to use three other buttons above the touch pad with red dot to restart the computer.

  After restart it completely, the touchpad with two down keys working again.

  Very strange, is there some sort can help me solve the problem?  Thanks for your reply.

  Try to uninstall the scanner activity monitor if it is installed.