Touchpad and right & left keys does not not on Satellite 350 d - 12 M

This is my first post so I hope someone can help out me. I had to open my laptop because my power connector moved inside my laptop and I was unable to load the machine.

I opened the case very carefully and repositioned the power outlet. When I put the machine back together right or left buttons or the touchpad would work. I never even touched anything around the touchpad.

I just lifted the upper right of the case so that I could slot of the power supply in place.

Any help would be really appreciated.
I tried FN and F9 to see if it would open the touchpad. I also tried to take out the battery and pressing the button for 30 seconds, none of them worked (I read this in other forums).

Hello

> I have opened the case very carefully and repositioned the power outlet. When I put the machine back together right or left buttons or the touchpad would work. I never even touched anything around the touchpad.

I guess that the touchpad worked correctly until you have opened and taken apart the laptop.
Is this good?

Well, I put t know why the touchpad buttons don t work, but in my opinion you damaged/disconnected something during the disassembly procedure and so the buttons don't work now.

I wouldn't recommend disassemble this laptop again because as you can see many other parts can be damaged or affected and this is why I recommend to contact a technician from mobile who could check this and might solve your problem from touchpad button.

Best regards & good luck

Tags: Toshiba

Similar Questions

  • Tecra M1: left and right arrow keys do not work

    Hi, my tecra M1 upwards, the left and right arrow keys do not work on the standard keyboard - no external keyboard. I can't find a keyboard tester to see if the computer recognizes these keys. Only the low key works - no problems with others like PG. Prev or PG. Next, etc. etc. Any suggestions?

    Mike Mori

    Hi Mike

    When you start your laptop at the beginning you can see the symbols of disk in the lower corner of the screen. If a player is selected under the side, you will see a short line. When these symbols appear press immediately to the left or right arrow several times to see if the line will be cut to the left or to the right. On this way, you can try to check if these buttons are recognized from the beginning.

    Please inquire about the results.

  • right shift key does not

    HP ENVY 15 t-j100 Select Edition CTO Notebook PC (ENERGY STAR)

    my right shift key does not work

    my laptop is new, it just

    the shift to the right have shift and break, perhaps that is the reason?

    Hi Ahmad89,

    Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you call in North America, the number is 1-800-474-6836 and for all other regions click here.
    They will help you with the keyboard problems.

    Thank you.

  • I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

    I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

    Thank you

    If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

    You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

    If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

    However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

    This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.

  • I had to replace my hard drive and now my key does not work

    I had to replace my hard drive and now my key does not work, it keeps giving the error 0xC004E003

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Activation error: 0XC004E003 http://support.microsoft.com/kb/938450

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

  • J K L; And enter the key does not

    I have a Pavilion dv7-6b32us laptop.  Intel CORE i7.  Windows 7.  Nothing added, but the printer drivers and nothing lately.  Yesterday morning keyboard worked fine.  Last night the J K L; were not working.  Clean under the keys.  Then enter key does not.  Have reloaded drivers.  The Enter key on the numeric keypad works ok.  I plugged in a USB keyboard and everything works normally with him.  Any ideas?

    Hey ModernMode,

    That's the spirit! Silver linings FTW!

    You are right. You can replace the keyboard following the same guide who will also give you the part number because they keyboard so you can order it online.

    Alternatively, you can contact HP telephone Support to control the keyboard, or set up the service for them to fix it for you. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

    Thank you for using the HP Forums!

  • Software Windows 7 was a fake and the product key does not work on this version

    my software was fake then I was redirected to buy the new product key so I did but I was redirected to buy windows 7 Home premium, but my version of windows is windows 7 Home Basic so now when I get a new product key and change my product key in the properties of my computer I get an error that my product key does not work ,. pls help

    Use the product key and do an Anytime Upgrade from Home Basic to Home Premium:

    ). Click Start, type Anytime Upgrade, click on the option to enter a key, enter the key of Windows 7 Home Premium, when asked, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Home Premium files the stored settings and programs.

  • Right control key does not work do not under macOS Sierra

    Since I installed macOS Sierra, the right command key is somehow mapped the option key (and the option key is still down option). There is a new setting I need to change? I'm not find it.

    Reset the default settings

     > sys prefs > keyboard > keyboard > restore ddefaults

  • Satellite A500 - switch WLAN and the FN keys does not turn the wireless

    I have currently problems try to activate the connection Wireless on my laptop. My laptop model is a satellite A500 PSAR9A O2J001. My laptop's physical wireless switch does not work and neither my Fn keys don't work (none of my function keys work not at all). It was awhile I saw an orange light next to my mobile switch indicating it was on, but one day, it's just off. Since then, I was not able to reactivate it after a lot of searching on Google, and this place is my last resort after doing so many things.

    Any help or comments would be appreciated, I am very desperate to solve this problem for studies.

    Your description is OK but rather general isn't easy to say with certainty what the problem is here.
    Is the card properly installed wireless (Device Manager)?
    FN keys work in general? You can use other keys FN + Fx? You see flash cards when you press the FN key? If so what options you see when you use FN + F8 (WLAN I think)?

    When you move position WLAN communication works and use the FN + F8 to what exactly happens?

  • Right shift key does not work after update BIOS on the Satellite A200 - 28 p

    For some reason, after I updated my Bios, my right shift key doesn't work and no not my FOUR and SIX button, so why I write in words: (,

    I tried to reinstall windows, t hasn't made a difference.
    I tried to roll back the drivers for the keyboard, as well as the move towards the US version of the keyboard, nothing has helped.

    Thank you

    Hello

    What cell phone do you have exactly? And did you use the correct version of the BIOS?
    Have you tried to set the BIOS to default settings?

  • The mouse pointer passed, touchpad and l + r buttons does not.

    Hi, I had my laptop HP Pavilion for nearly two weeks and only today, I blocked my phone and I noticed that my L + R and the touchpad buttons are not working and my mouse pointer had completely disappeared.

    Can someone help me by telling me how to fix this? I would be very grateful.

    Thank you.

    Hello, @cf159

    Welcome to the HP Forums.

    It seems that, after the blocking of your laptop, you have lost the function of the touchpad. I will try to help you with this.

    Have you tried to restart the laptop yet? Try this first.

    If this does not work, turn off the computer, unplug the power adapter (if connected) and remove the battery. Press and hold the power for 30 seconds. Connect the dough or power adapter, turn on the laptop and the test.

    If the problem is still present, you can try to do a restore on the laptop.

    If it still does not, then try to update the drivers. You can do so here: drivers & downloads.

    I'll let you start with that. If you need other assistance please provide the model number and product for your laptop and the currently installed operating system.

    Thanks for posting on the HP Forums.

  • Laptop HP 15-R203tx: brightness (f2 and f3) function keys does NOT work

    Model - HP laptop laptop 15-R203tx

    OS - Windows 8.1 Pro 64-Bit

    Graphics - Intel HD 5500 integrated

    Dedicated NVIDIA GeForce 820 M

    I updated the drivers for my also well-integrated dedicated graphics card but still my function keys f2 and f3 for brightness control does not work although all other keys work.

    This PC comes with the BACK, but I started it with 8.1 Windows Pro 64-bit.

    Hello

    Well that does not explain why your f2/f3 keys do not work as you have only the Microsoft base driver installed - if the Intel driver has already been installed Ok, this may indicate a hardware problem.

    What happens if you try to install the Intel HD 5500 driver directly from Intel - it's the 2nd file in the list on the following link.

    https://Downloadcenter.Intel.com/search?keyword=Intel%C2%AE+HD+graphics+5500+for+5th+generation+Intel%C2%AE+core%E2%84%A2+processors

    If it installs Ok, reboot the laptop and let Windows fully load for a few minutes before checking it in.

    Kind regards

    DP - K

  • I bought a warranty of 2 years of more extensive access, but my license has expired and the product key does not work... Help!

    The purchase details are below... Any ideas...?
    Summary of the order

    Order date:2014-06-19 23:31
    Eastern daylight time
    Order number:100301445537
    Receipt of order by e-mail

    Billing information

    Payment:PayPal

    This may appear as "Kivuto Solutions Inc." on your statement.

    All prices are in Australian Dollars

    Amount

    Adobe Creative Suite 6 Design & Web Premium (Mac) (English) - download
    Guaranteed access extended (24 months)
    24 months access to your download and/or the key . This does not extend the licenses for a limited time (as applicable). Learn more  
    Expires on 19-06 - 2016

    Product key: [deleted]

    Messages:

    Contract number: 4400312765 registration number: 4400312765

    $12.25Guaranteed access extended (24 months)

    $4.95

    Subtotal:

    Taxes:

    Total:

    $17,20
    $0.00
    $17,20

    [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

    [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

    [This is an open forum, not the Adobe support, please do not post personal information]

    I bought CS5 while I worked at a University, and the serial number supplied with my purchase does not have an end date

    Have you purchased a license limited time, as he mentions in what you posted?

    I think that you must return to this seller and see what it is that you bought... 17,20 $ being any amount that you would have to pay for the actual product CS6... so, as I said, I don't know anything about a license extension

  • Satellite A500 - software jump issue and eco mode key does not work

    Hi all you guys :)
    I read many forums these days, and my problem is still there.

    I did an update provided with records of 2 updates for Toshiba (Windows 7 on a disk and drivers updated to this OS in the other disk) and the first 2 weeks, everything was ok. Then stopped working the windows media player jump list. The jump of live messenger never worked but good list. I didn't have the will to uninstall them, clean and reinstall. It was just the messenger.

    After media player jumplist that I started looking on the Internet, but nothing has worked, sfc scannow, the antivirus is mse, and I never changed anything. After that, also started to pop-up Windows defender turned off at startup and then also stopped workin the eco mode selection button and the button display to open mediaplayer.
    What can I do?

    I also updated the BIOS and I have the latest Windows.

    Sorry for the long post ;)
    Thanks to all in advance!
    cyaaao!

    Hi mate

    I'm not very well if this problem could be related to an error in Win 7 m.
    But everything looks like it could be the case

    In my case the jumplist will appear when I do a right-click on the IE icon or the Windows Media icon placed in the taskbar on the left side.

    I searched a bit a found this MS Jumplist page and how to handle this:
    http://Windows.Microsoft.com/en-us/Windows7/using-jump-lists-to-open-programs-and-items

    Maybe this could be useful for managing the jumplist.

  • ConfigFree - Radar continues to show an error message and the FN key does not work

    Error message: "wireless communication disabled. Please select a Wi - Fi using the Fn + F8 key". (Even when the wireless connection is active and works very well - hardware button works) problem is that pressing FN + F8 help is no longer.

    FN key not actually launch his menu at all. I have reinstalled ConfigFree, System Restore, searched relevant Toshiba Software or drivers, but nothing is.
    I have Toshiba Satellite P300-1 c 8, Windows Vista 32-bit.

    Help, please. Thank you.

    I see you have second similar thread about work flash cards.
    If you want to have it remove to new package of added value of the system, restart the computer and reinstall VAP.
    You can find it on the download under http://eu.computers.toshiba-europe.com page > support & downloads

Maybe you are looking for