TouchPad clicking problem & gestures

Similar Questions

• two fingers of y510p elan touchpad right click problem.

  Hi, I recently bought a Lenovo Y510p, and the touchpad is using software MOMENTUM. However, by default, it seems not to allow you to use two fingers to type to right click, or three for middle click.

  After digging the question, I discovered you can make some changes by installing the driver Asus Elantech 11.5.0.9 to allow you to see a lot more options in the Control Panel, and I've changed with success the Swapping and 3 functions touch 4 fingers.

  Despite this, I am fighting to change the tap water double finger.

  Is anyone able to help me with this issue?

  Thank you very much.

  mine solved it by installing the driver Asus Elantech 11.5.0.9. It will give same much u of other features also.

• Portege Z30 / driver Audio Replicator + Touchpad scroll problems

  Hello.

  I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)
  but there are a few light (more or less can be addresses as a driver) questions that I discovered.

  Notice: I use Win7 64.

  (1) with the Replicator Docking Station, I'm not able to remove the USB Audio device is currently running.
  As you play a video or music. -J' looked for a newer driver (from C-MEDIA) as the standard Microsoft Driver may not be the best choice but I have found NO Win7 drivers for this device. The pilots of C-MEDIA only I found is Win8.

  (2) ALPS Touchpad (pilot)... EH... the material error only on this model really seems to be the touchpad. It is quite difficult to click on buttons AccuPoint (those under the keyboard) and drivers of touchpard are not flexible somehow. Gestures are not actually enforced as it should... seems to be as ALPS had to work on without a lot of time. Synaptics would have been a much better choice.
  The driver cannot be adjusted to speed with scroll gestures and by default is AVERAGE... really ridiculous WAY to fast. In short, it is unusable for regular use. That the effects of tape, the gesture with two fingers and also the gesture of circle. He is desperately missing from a slider to change speeds. Or at least some indication of registry settings.

  Also please advice DAPS to add finger 2 tap as a regular feature in the driver. It can be used without any problem after minor registry change and it works without any problem.

  (3) in the manual NFC is listed, but I have not found ANY Z30 Z40 (Tecra) model has / contain probably the NFC module. -I've seen in some photos the flexband connector (must be for NFC) above the battery is actually present. -There will be a few spare parts (Please give me the ID number /) in the future?

  (4) smart card reader driver problem: I'm using the latest drivers and after some time and sleep (with Intel Rapid Start) the player first must be deactivated and reactivated to rework. certutil.exe - scinfo unresponsive until I have disable and re-enable the device.

  (5) I am absent in BIOS/UEFI to exclude startup devices. -This is normally a must have feature.

  I think that the user manual contain parts which refers to different models of Toshiba as Portege Z30-A/Z30t-A / Satellite Z30-A/Z30t-A

  Some models are equipped with an NFC function, but can not say with certainty what models support this feature exactly.
  It turns out that in many cases the m2 additional connector be responsible for these additional modules.

  Regarding the mode of UEFI: check if the BIOS update would add it. Some portable computers taken over this function after that the BIOS updated.

• spectrum x 360: ScrollBar and Touchpad heat problems

  Hi everyone, I just got my x 380 13-4110dx spectrum model. After months of research on laptops, I settled on the spectrum, and it had shipped all the way from the United States to Bangladesh here. Needless to say that the questions arises as soon as I turned on the thing, so that's:
  
  TOUCHPAD:
  This is the big one. I'm used to having the page move down with my fingers while two fingers to scroll, but the direction of travel is reversed by default with coasting trade licence. However, when it is turned off reverse the scrolling and cabotage in the settings of synaptics it seems to work on some applications and not anothers. I tried to reset the onboard computer and reinstall the driver software AND I also tried to install the latest drivers from the synaptics Web site. Nothing works not so far
  
  HEAT:
  The bottom tends to run very hot even with normal web browsing, so I can not put the thing on my lap for a long time. I have install the fan to operate always from the BIOS, but its still the same. At this temperature, I do not know how long the material is going to hold up
  
  Sorry for the long post, I really hope you guys can help me understand things

  After a lot of frustration, for the past few weeks my touchpad has been behaving satisfactorily. Here's what I've done, maybe it will help someone else here who has the same problem:

  • Make sure the driver is updated to 192.0.12.107
  • Go to Device Manager, open the properties of the mouse and click on 'Update device driver.
  • In the wizard that opens, click on "Browse my computer for driver software".
  • Then select "Let Me pick from a list of drivers for devices on my computer.
  • In the next window, uncheck "See list of compatible hardware" and search for and select "Synaptics Clickpad SMBus"
  • Install and reboot the computer

  Windows installs the driver Synaptics Touchpad of SMBus by default, which leads to the scrolling issues I was experiencing. The pilot clickpad works much better. I don't know how the two drivers are different, but it worked for me

• Satellite U920t-102 touchpad click right question

  Hello

  I have a new U920t-102, which I am very happy with, but I have a problem with a right-click of the mouse pad (which means the 'button', the user is able to support on the lower side of the mouse pad): sometimes it actually works like a right click, sometimes it works as a left click.
  It's embarrassing, especially during web browsing: I used to do a right-click on the links and open in a new tab, but when the right click actions left or right-handed, I lose the current web page.

  I tried to understand what depends on this behavior, by looking at the synaptic animated icon on taskbar windows while playing with the left and right click. If I continuously press the button to right click on the mouse pad, after a few rehearsals, he will be consistely and working properly as a right-click, but if press left click once or several times, the right click button works as a left click for certain pressures and "corrects" himself and start again to work properly.

  Any idea or suggestion? is this a hardware problem?

  Marco

  Usually the touchpad right click / left can be configured in the settings of Synaptics.
  Right click on Synaptics icon on bar tasks and then tap properties of devices.
  In buttons tab that you will be able to choose system or right- or left-handed.
  Here, you may choose a plan suitable for you.

  You can also try uninstalling the driver for the Synaptics touchpad and may test the functionality of touchpad without the use of additional touchpad software.

  But if it does not help, your forces have hardware problem

• HP Elitebook 8560p touchpad click right questions

  Hi all

  I have a very strange problem with my elitebook 8560p my click right button closest to the keyboard isn't sewing to work well in all other touchpad buttons work, but soon I uninstalled the synaptics driver, I am able to use the right click as close as possible to the keybaord.i have tried an ubuntu Linux operating system and works very well , I am currently running windows 8.1 Professional 64-bit using also the last the latest synaptics driver available .i also tried windows 7 and the same thing experience. Any help would be greatly appreciated.

  Thnaks

  Lekshmen

  P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC Compaq HP ProBook, EliteBook, slate/Tablet PC, Armada, LTE. Forum Moderator - HP

  Hi all

  Has taught I'll let you know that I found the solution to my problem, it was a problem to do with the equipment in particular the keyboard a keyboard of spare lying around which I taught I'll swap out and it worked right as close as possible to the keyboard worked everything suddenly I restarted several times to confirm and is until it worked.i also wanted to do further investigation to see what part of the keyboard did not work because it has two cables Ribbon one for the point stick and one for the real keybaord.i unplugged the cable Ribbon key point and just left the ribbon cable to the keyboard in the machine and both right-click and left-click now was not working so I decided to pass cable point Ribbon stick from the work at a keyboard was not working and plugged the keyboard original back and all the buttons worked even the right so guilty was the Ribbon for the point stick cable.

  Thank you

  Lekshmen

• HP Pavilion 17 Notebook PC: can't disable the touchpad / click from installing windows 10

  I am able to disable the keypad to click in the settings, but as soon as the computer goes to sleep or restarts the cushion click is activated. I prefer to use a mouse via USB. How to make the adjustment remains permanently until I want to activate the key again.  The computer indicates that the driver is up-to-date. I tried to go back to the old driver, which didn't help. As soon as windows can be delivered the internal keyboard is on again once. This has happened only since installing windows 10. I hope that I did not need to return to windows 8 to solve this problem.

  Hello

  I would like to inform that Microsoft have released patches to update to solve problems related to the touchpad. I suggest to go ahead and run Windows updates and check if it helps to solve the problem. Also run the HP support assistant software to check the updates from HP do you driver.
  If the steps above don't help you.

  Try the following
  Open regedit.exe
  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install
  Note it's the LOCAL MACHINE, not the CURRENT USER.
  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade
  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.  See if it keeps the settings.

  If it is not difficulty, navigate to the Device Manager and go to 'Mouse and other pointing devices' right click on the synaptics driver and go to properties and under the driver tab control if you can 'dismantling' of the driver.

  Thank you

• HDX24005010: Touchpad zoom problems

  I bought this computer last week and until leveled for Windows 10.  I'm having the problem that whenever I start the computer, the pinch to zoom is turned on.  I've been to the touchpad and unchecked the boxes and saved, but every time I turn on it does again.  Any way to get it to stay out of?  I have a Vario as my old computer and I upgraded which Windows 10 and I'm not having the problem with this computer.  It's really annoying and I would love to turn it off for good.  Any ideas please?

  Hello Pennyh13,

  Thanks for the quick response!

  Try right click on an empty space in the taskbar and select Task Manager.  When the Task Manager, click on the Startup tab.  See the list of programs that are allowed to run during startup, and then see if the Synaptics pointing device is one of the choices.  If so, right-click on the program and select Disable.  Try restarting the laptop and I would like to know if it works.

  I hope this helps.

  Kind regards!

• Touchpad - click right does not

  On my Sony Vaio, the touchpad 'right click' installation does not work, can you please help?

  Hello

  Could be a hardware problem with the touch pad.

  Check the Sony Support, their drivers and documentation online and ask questions in the forums on
  known problems.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  =============================================================

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration-Device Manager - mice and pointing devices - Double click on the TouchPad
  -Pilot Tab - click on Update Driver (which is may not make anything as long as MS is far behind)
  drivers of certification), now RIGHT CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself
  (all in it). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here are the similar steps in XP, Windows 8, Windows 7 and Vista is the same, except
  We need clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  =================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Touchpad scroll problem (N500 5 MG)

  I have a Lenovo N500 5 MG and I have a problem with my touchpad

  I downloaded the driver will for him and installed successfully. everything is OK but the vertical scrolling does not work

  How can I solve this problem?

  This model has a horizontal scrolling?

  can someone help me?

  (Sorry my English is very bad)

  You have to activate the scroll at the discretion of touchpad function?

  If this isn't the case, you can go to mouse properties or the bar system toucpad.
  Select the gesture, and check "use the scroll function.

• Satellite A500-1EJ turns on itself - touchpad light problem

  Hello, I just bought a Satellite A500-1EJ and I have two problems:

  It lights by tself and volume and the light button does not work properly.

  Regarding the issue with automatic starups:
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=195616
  You must update the BIOS to the latest version to solve this problem

  > the volume and the light button does not work properly
  I don't know Mr. What volume or touchpad light you mean exactly and that is - this means not working properly?
  Perhaps you could be more specific and could provide more details

  Welcome them

• Satellite T110-107 - Touchpad / mouse problem

  Just had delivery of a new Tosh T110-107, I have to say is beautiful, however a problem. A startup the touchpad works ok, but as soon as I plug the mouse USB may not work - what makes the system unusable until I disconnects me restart and the mouse. So what have I so done for her?

  Uninstalled McAfee and Norton 360 addded and office (two originals) and that's the problem were found until everything has been done - as he came out of the box.

  Win7 Home Premium, never had any problems with Win7, but then not used on a particular laptop model. Can only imagine its software/config but straight out of the box? Tosh must know there is a problem-they have too, but sold it?

  Does anyone else have this problem?

  Answer to Ah my own question, mouse at fault, as soon as the wheel is moved all the works, but we must constantly move or it don't work. It turns out that the mouse was not part of the package, so apologies to Toshiba, but then, that's why I had to buy this machine of large model - deemed manufacturer - if and I would recommend it to anyone who is thinking about buying one.

• Satellite A110: keyboard, touchpad, power problems

  I have a Toshiba Satellite A110, purchased a few months before. In recent weeks, it started randomly locking the keyboard and the touchpad (with or without external mouse plugged - although an external mouse still works).

  Now there is power to the top of the issues, with the suspended system Bios Toshiba screen, can fully initialize maybe once in five.
  Acquisition of wireless network is also very temperamental. I tried this software I can think (new drivers/virus scan/uninstall-reinstall), with the exception of a reinstall full backup disk Toshiba.

  Any advice would be greatly appreciated.

  Thank you

  Hello

  I think we should first find out if the problem is software or hardware related.
  In this case the installation of the operating system with the Toshiba Recovery CD is recommended.
  After installation, the laptop should work without worries.

  But if the unit will hang and not start properly there could be something wrong with the hardware.
  I think that your warranty is valid and in this case you should always contact the ASP in your county for a check.

• Equium A100 - 549 Touchpad / pointer problem

  Greetings

  I'm having a problem with the computer laptop girls :(

  When you start the lappy up to 60% of the time once the desktop and its loading bits in the lower right the right pointer disappears and we cannot do anything with the machine outside turn off using the power button.

  If we continue trying to start the machine, eventually it will work normally. It's just like a random event: S

  I have been through the forums and the FAQ etc, I have uninstalled and reinstalled the drivers touchpad etc and tried some of the corrections mentioned on these forums, but nothing seems to solve the problem, for example the bios, chipset drivers...

  Wouldn't be a windows problem?
  Is it worth taking the time to go through the process of running a start-up in minimal mode and looking for a service does not, or reinstall a full windows? or is it something that I didn't think?

  Any help and ideas would be fantastic thanks :)

  You can start a computer laptop in SafeMode (F8 at startup) and check if there is the same problem with the touchpad and pointer?

• Tecra M9 (PTM91E) and touchpad driver problem

  I had to install * Win 7, 64 bit * on my laptop * TECRA M9 PTM91E *.

  Most of the drivers could be found, but the * touchpad * is turned off. In addition (?) I get an error message, that a pilot for "* communication controller *" (ID: PCI VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03) is missing. Compatible devices would be PCI VEN_8086 & DEV_2A04 & REV_03

  I don't know, TECRA M9 is not supported by Toshiba for Win 7, but can someone help me with this problem of driver?

  Thanks in advance.

  Have you tried to install the driver for the touchpad Vista?