touchpad do not work properly after installing 10.11.6 on macbook pro mid-2009

The touchpad works perfect just before and after installation, I need to take the laptop to an Angel to have the touchpad working.

Any ideas, anyone?

The trackpad works normally in Mode safe? OS X El Capitan: start in safe mode

If this isn't the case, I do not exclude the possibility of a hardware failure. The battery has problems?

Tags: Mac OS & System Software

Similar Questions

  • SD card is not working properly after installing windows 10

    I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

    Hello LorinMax,

    Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

    If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

    1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

    Disk utility (El Capitan): a disc repair

    2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

    Try safe mode if your Mac does not end commissioning

    Graphics performance limited in recovery of OS X or in safe mode

    3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

    Boot Camp Installation & Setup Guide

    Backup of your Mac hard drive

    OS X: on OS X Recovery

    See you soon!

  • Portege Z930 - 12 M - Touchpad is not working properly after update of Windows 10

    I recently extended my laptop (Z930 - 12 m) for windows 10, everything works fine so far, except the Touchpad (Synaptics).
    I can't scroll more and also setting the momentum that I used before seems not to work any longer.

    So I wonder are updates for the drivers planed for this? Or can I get them anywhere else?

    Update:
    Scrolling on the touchpad works now, I have just changed the settings correctly.
    But the momentum still does not work.
    In any case, I found a view drivers for my laptop
    http://win10upgrade.Toshiba.com/swup...=de&country=at

  • The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

    Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

    I thank in advance.

    ~ Mike

    I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

    Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

    Ciao.

  • Satellite L50D-B - TouchPad does not work properly

    My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

    To be honest, it is not easy help these problems.
    What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

    Have you tried to turn again using the F5 button?

  • Synaptics touchpad is not working properly on the Satellite A100-635

    My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

    I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

    These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

    Who can help me with this problem?

    Hi Jarno

    Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

    According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

  • MacBook pro mid-2009 can not insert disc in the drive

    I can't insert a floppy in the drive of my Macbook Pro mid-2009! It's a s if there is a disc already inside - something is it prevents insertion of entirely.

    I've tried several "cures" I found on the net - one of them worked for a short period but now the problem is back.

    The guys at the genius bar in an Apple store have seen this problem so often, they got some field tools rush this opening and get in and out drives. If who disobeys, they can take in the back and open it to fold the skin of the player, fitness and clear of the issue.

    You an appointment for an assessment is free, guaranteed, or rear. In general, if they can solve this problem in less than a quarter hour without spending coins, there is no charge.

  • MacBook Pro Mid 2009 15 inch 2.53 GHz unibody battery needs to be replaced, but I thought that apple does not manufacture the most

    Hello

    My local apple says that Apple does not make these batteries more and he can tell me how I can get a.

    Is anyone know what are the best batteries for replacement out there and how to get one?

    Thanks in advance,

    Edo

    Here are good suppliers of batteries for Macs.

    OWC Apple batteries: batteries from OWC

    Anker batteries: batteries ANKER - MacBook Pro 15 "mid-2009

    iFixit battery MacBook Pro - mid 2009: iFixit Batteries

    Kim

  • Touchpad is not working properly in the Satellite A200

    I have wired rather question for you, may be common.
    Touchpad on my laptop is not working properly, and I'm wondering someone can tell me what 'wrong with it. My problem is at the bottom,

    When I turn on the laptop, I can connect to the through the use of the touchpad, but after I logged in the only thing that I can move the pointer over the programs, but I can't double click or do anything else. When I double-clicked the icons it does nothing.

    So I thought I might turn off something by mistake, can I use the touchpad to connect.

    Can someone please tell me how to solve this problem or what I can bring to a service center?

    Hello

    If you can still move the cursor using the touchpad touchpad is not disabled.
    Perhaps a button configuration has been changed.

    Usually, you can configure the touchpad the touchpad settings.
    Did you check that?

    You can find the settings in the control panel-> mouse
    There should be an Advanced tab.
    Go ahead and check the settings of the advanced feature.

    Here, you can configure the simple buttons and also the touchpad.

    If you will not be able to reach these settings so I recommend reinstalling the driver for the touchpad again!

    Good bye

  • computer does not work properly after the update, because the screen is black.

    Advice please! :-(

    After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

    The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

    My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

    Any advice would be so appreciated.

    Thank you.

    Hi Patty,.

    Welcome to the Microsoft community. I would be grateful if you can answer these questions.

    1. You have installed the latest drivers for Windows 8?
    2. What is the model number for Gateway computer?

    If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

    Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

    Method 1: To resolve this problem, update the Gateway website. video card driver

    Step 1: Check out these Microsoft items for additional reference:

    Download and install the drivers

    http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

    Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

    Download your applications and devices in Windows 8.1

    http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

    If the problem persists, proceed to the next method.

    Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

    Windows 8 starts with a blank screen after a standard or hibernation

    http://support.Microsoft.com/kb/2756559/en-us

    See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • Satellite Pro C50-A-153 - Touchpad does not work properly

    First, sorry for my bad English.

    I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

    Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

    It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

    Can someone help me with this?

    Thank you.

    On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

    How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

    Check it out.

  • the trackpad is not working properly after the update to 10.11.4

    Hello

    I've updated my mac pro to the latest OS. However, the trackpad does not work correctly. Sometimes he strives to move the arrow but double click, drag, and all other actions do not work properly.

    Can someone help me out here? Is there a way to reactivate the trackpad or update driver for the trackpad.

    The trackpad is build-in bluetooth no one.

    Thank you

    There are two main troubleshooting steps I suggest to complete to start troubleshooting your touchpad is not responding. These steps are reset of memory NVRAM and the SMC on your Mac and the instructions for each can be found in the articles below.

    How to reset the NVRAM on your Mac - Apple Support

    Reset the management system (SCM) controller on your Mac - Apple Support

  • Satellite M40-110: WLan is not working properly after sleep mode

    Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.

    My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
    But I am wary about this option:

    (1) not allowing this option cause draining my battery quickly?
    (2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?

    Thank you
    Sinan.

    Cool, thanks for the info

  • I get an error saying: "WSOCK32.dll does not work properly" after playing a game on a web site.

    Hey, I'm using windows XP on my IBM thinkpad T40.

    I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.
    It is sending a bunch of errors at startup and saying things are corrupt.
    I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!
    Please help me...
    original title: WSOCK32.dll errors

    Hello

    -What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?
    -What are the exact error messages / complete that appears at startup?
     
    Follow the steps mentioned below and check if the problem persists.
     
    Step 1: I suggest you perform the steps from the link below and check if it helps.
    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
     
    Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:
    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
    Hope this information helps.
  • Phone of blackBerry Smartphones does not work properly after upgrading Poynt

    Hello.

    Yesterday, I upgraded my poynt app, which seems to have causes all types of problems with my phone.

    (1) my email account icons have all disappeared, although it recognizes new messages, I can't access it.

    (2) the device does not allow me to access my texts all the time as well, and I get errors such as:

    Eception exception: application_net_rim_bb_message_app (231) does not.  I had the same message with several different numbers.

    I also have java.null messages, even if it is rare and I don't remember the exact error.

    (3) desktop manager cannot access the device, it does not allow me to backup my data.

    (4) I tried to reload the os, and applications but it fails because it cannot back up data...

    I'm lost and can't seem to find help on the net for this, and at this point, I want to just wipe the slate and start over from scratch.  Maybe completely reload the software or something.  I have most of my contact information on my sim card from my previous phone, data loss would be minimal...

    can someone help me please understand what to do.

    Info on the device

    Your carrier: att

    Model information and the version of the OS (go to settings, then Options, then):

    8900 v4.6.1.231 platform 4.2.0.108

    Apps and free space

    hard battery pull did not.

    Installed apps and their version if possible.  I have several apps installed:

    Poynt, bloomberg, score, xenozu, facebook, bablphone, CBS Spanish football, dictionary.com, anchor.  all are the latest versions, except for some reason any phone does not recognize that I have the latest version of home.

    but the last poynt update caused this, and I have already deleted poynt.

    Thanks in advance for your help.

    Thanks for your help.  So a question I had was that my camera was unable to save all the data, and therefore loader did not work properly.  I read somewhere that you can stop the car to the top, did this and reloaded the new os.  I think that things are finally working

    Thanks again for your help.

Maybe you are looking for

  • Tecra A9 - Lost Via Domus just will not work

    Hello, this is my first post on the forum and im really stuck trying to get this game to work... Basically, I run linux on my main machine and Windows XP on my laptop but when I got this game, I realized that my laptop spec was too weak to play, so I

  • Satellite L300 01:00 in WinXP-drive CD/DVD turns and stops alternately

    HelloI bought a new Satellite L300 01:00I installed Windows XP Home SP3 System (using nLite and driver of SATA Storage Manager) and all the drivers from the Web from Toshiba website. I have problem with CD/DVD drive (HL-DT-ST DVDRAM GSA-T50N):-copy o

  • Lenovo ideapad z510

    want lenovo ideapad 8DCN38WW z510

  • I can only connect to the network via a wired connection. Wireless does not connect.

    Wireless does not work but internet will work when plugged into router direstly Wireless does not work but internet will work when plugged into router direstly I reset my router repeatedly and still will not work.

  • Comparison of Lx20 fan noise

    Hello I am a happy owner of a new L420, but I feel that the fan is very noisy. It's not so much air flow noise, it's really good, but the sound produced by the motor of the fan, which is led to the case and internal microphone, so it is quite audible