Touchpad does not at all on Equium A200-1VO

Similar Questions

• Can not activate WLan on Equium A200-1VO

  Here goes

  I just configured my router netgear dg834 g v4 on my laptop and was instructed to do this via a wired connection, as said on the installation.

  I now cannot turn on the wireless and I would so I don't have to use an ethernet cable.
  I tried the fn and f key and he said just off sound and doesn't let me do anything.
  Now im confused cos before I had it installed it worked great!

  Nobody here does not know how to activate it as im new on vista and can't work out, been sitting here for 3 hours now trying and his head to me.
  See if it was on xp I would ave no problem sortin this type off the coast of the question, but as his vista I ain't got a clue?

  Anyone who has met by this kind of question before?

  Somoene can help me?

  One question;
  Have you bought this laptop with the pre-installed operating system Windows XP or the Vista operating system preinstalled?
  As I m not wrong not the laptop was running Vista and the Toshiba Recovery CD should also contain this OS.

  Now to the second question.
  Have you used the Toshiba Recovery CD to install the Vista of return?
  Usually after using the recovery CD everything should works fine!

  I read that sometimes the Wlan cannot be turned on because of missing patches from Ms.
  Check if Vista has been updated and KB935222, KB932030, KB932063 hotfix were installed.

  Good bye

• Equium A200-1VO - touchpad does not but the fact external mouse

  I had a problem with my hard drive does not it just happened overnight so I replaced the hard drive no problem and rebooted the system.
  Everything is ok but the touchpad does not work.
  I tried FN + F9 it's ok, I have updated the touchpad program still does not.

  Help, please!

  XP or Vista?

  Did you use a Toshiba Recovery disk to install Windows? Or a generic version of the street of Windows?

  Maybe you should go to the Toshiba website and download the drivers.

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• Equium A200-1VO does not start and makes weird noises

  My Toshiba Equium A200-1VO don't load on Windows entirely, which means I can't use it. When you turn everything goes well until the Welcome screen in Windows Vista. From there, it starts to get weird creaking and it beeps from time to time. It won't start here and these sounds do not stop.

  Help please

  Hello

  Is it possible to know where the noise comes from?
  As suggested by above user, it could be a HARD disk, but in this case, it would mean that HARD drive failures and he could die in the next time

  You said it s begin properly until appears the window Vista would be
  So maybe it s only a problem of software but I m still don t know what part of the software would create such sound however, I think that if would not be bad to reinstall the operating system in order to check the notebook with factory settings.

  If this strange question would persist or if you would not be able to reinstall the operating system using the recovery disc then a hardware problem could cause this strange things and I think it means that you will need to contact the ASP in your country for a material test

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• My touchpad does not work well on Satellite C55-A-1ND

  For several days my touchpad does not work well. It has nothing to do with the power touchpad button on the F5 key.

  The touchpad is most time does not and something a bit but I can't use the touchpad at all now.

  When I attach my external mouse on my laptop I can use my laptop otherwise I can't use my laptop.
  I already rebooted my laptop several times, but it helps not at all.

  I hope someone can help me!

  You said that this issue has nothing to do with the touchpad on/off function s.
  So what's exactly wrong with the touchpad? Is he disabled or enabled?

  Have you checked the settings in the control panel-> mouse-> last (device settings) tab-> settings button?

  Have you already tried to reinstall the software/driver for touchpad?
  If this is not the case, do.

  By the way: what model of laptop and what system you have?

• Satellite C850D-11 q - keyboard and the Touchpad does not

  The laptop is a little more than a year and worked ok until recently.

  Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

  He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

  Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

  Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

  Any ideas appreciated?

  Thank you

  Hello

  > Finally cleared the HARD drive and restored windows 8 only
  I hope that you created before Toshiba recovery disks you have formatted the system.
  Did you?

  The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

  > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
  Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
  That is why in most of the cases the keyboard problems could be the causes of physical problems.

  However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

  > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
  BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

  I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
  But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

  So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
  Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.

• Satellite L50-A013 - touchpad does not work

  Hi all

  I've had my L50-A013 Satellite for about 7 months now.

  In the last month or so I started to have problems with the touchpad, freezing and does not not my contact.
  This lasted a few minutes at a time, then came the back of its own accord, almost like a very long latency period.
  This morning, however, I turned on my laptop and the touchpad does not work.

  Device Manager does not display a mouse or pointing device at all until I attach a mouse USB.
  By pressing the key that normally activates / deactivates the touchpad does not work - nothing changes and the light does not turn on in both positions.

  I tried reinstalling the drivers without result, and windows is no update that might help (or any recently that might have caused the problem).

  If anyone has any other ideas for what I can try, it would be amazing.
  The laptop is under warranty so I can hopefully get it fixed, but if possible I would really do not have to go without a computer until it's settled.

  Thank you all for your time,
  -Sase

  Hi Sase

  It is not easy to say what the problem is, but I can imagine that there is hardware problem. Perhaps touchpad loses the connection to the motherboard. I mean if this piece of hardware is not detected I can imagine this scenario.

  Of course best test you can do now is to reinstall OS and test functionality with the factory settings, but will delete your actual configuration of OS and software pre-installed.

  If this kind of test is possible do. If not, I think you must contact the nearest Toshiba service provider and ask for help. They have special diagnostic tools and they can check it for you.

• Satellite A350D - 20K - Touchpad does not

  Hello Madam / Sir:

  Please give me a way on how can I fix my laptop problem. I use Toshiba Satellite A350D - 20 k, its original operating system was Vista 32 bit. As I discovered that my machine has been supported to use Windos 7, I decided to change my OS to Windows 7 64 bit. When the first time I've used it using Windows 7 OS my touchpad worked again.

  But change a BONE I have to find the driver, so I was looking for your www.computers.toshiba-europe.com site, so I found the latest updates for family series specifically A350D but not A350D - 20K I can't find this exact model updates up-to-date, so the updates of the A350D I saw, I downloaded all of them even the update of the BIOS...

  Before that I use version 1.2 of the BIOS, but since I saw a latest version which is version 1.7, I decided to install it. After that I installed it I noticed that time if my touchpad does not work because I use a mouse (external device), maybe that I installed it Wednesday, October 6. For some time, when I take my mouse when I tried to use the touchpad, that was the time I noticed that it does not work.
  I don't know if my bios version change has been the one who made this problem.

  I asked some recommended to my friends and they asked me to the Toshiba site, if there is a BIOS utility crush so that you can restore your previous BIOS or if they still have the old version of your BIOS which is 1.2.

  So now please dear I sincerely ask a help for my problem. Thanks a lot for your time in reading my concern.

  Edit:
  In addition, I already recover my lap top using may but recovery disk, it does not solve my problem, my touchpad still didn't work. My drivers in Device Manager is over. The driver installed in my device manager is

  * mouse and other pointing devices *.
  Compatible mouse HID
  Synaptics PS/2 Port TouchPad

  Hello

  Satellite A350D - 20K belongs to the series PSALME. According to the Web of Toshiba BIOS update site that you can find for A350D (version 1.70 - WIN) is compatible with all models A350D so I guess that the BIOS update isn't the cause of the problem. As a general rule after a BIOS updated you must load the defaults in the BIOS if you press the F9 key in the BIOS Setup. This will load the default settings.
  Also, make sure that the internal pointing device (touchpad) is not disabled in the BIOS. On some laptops you can disable it in the BIOS and it must be set to activate.

  After the installation of recovery also try the FN + F9 key combination. With this combination of keys you can also turn off/turn on the touchpad.

  Check this box!

• Satellite A350-20 q - Touchpad does not

  Hello members,

  I have a Satellite A350-20 q that is running a Windows Vista Home Premium 32-bit operating system. The problem is with the touchpad which stops working when the laptop is connected to the
  AC power supply and everything that happens, I can feel the static on the buttons near the tablet which are metallic.

  The touchpad works fine when it runs on battery and it causes a lot of trouble because I move around a bit and can't take my mouse around.

  I called Toshiba support, but all said, it was to replace the charger that does not make any sense to me but I try, and again, it doesn't help much.

  The touchpad works very well when Vista is installed and is not updated, but once the system is fully updated it starts to cause problems and I can't yet determine which update is the cause of the problem that there are many Windows vista updates are installed.

  Help, please!
  I installed all the drivers and have the latest synaptic driver installed on the system right now.

  Thank you.

  Abhishek

  > I had called support of Toshiba, but all said, it was to replace the charger that does not make any sense to me but I try, and again, it doesn't help much.

  I think that this logic because the touchpad does not work ONLY when the AC adapter is connected.
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141976𢪘
  He has helped about the similar issue and replacement AC adapter!

  > The touchpad works very well when Vista is installed and is not updated, but once the system is fully updated it starts to cause problems and I can't determine same update is the cause of the problem that it is has many windows updates vista that are installed.

  How a windows update to do the buttons on the touchpad statically? It is meaningless for me so be it hardware or software s problem

  If this software (update of the OS) then deliver the power adapter should not all affect on the buttons on the touch pad but if there s a hardware problem, then the OS updates should not affect the functionality of the touchpad as well

  I think that it s a strange question and you should get in touch with a local ASP (partner) in your country in order to check the touchpad.

• Touchpad does not work on the Satellite A100-812

  Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
  Help, please.

  ([email protected])

  Hello

  you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
  Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

  Would be recognizing a few comments if it worked. :)

  Welcome them

• Touchpad does not work on Satellite C55-A-184

  My touchpad does not work...
  I don't have a mouse to use to get the details of the driver etc.

  Can someone please help
  It is so boring.

  I can't download the update of the driver as I'll have to use the kindle to find help,
  Any advice would be greatly appreciated,

  Thank you.

  What happened exactly, or what exactly makes you in the past, until this problem happens?

  First of all, please post some details on your laptop model and the system you are using.

  Then check if your touchpad isn't disabled.
  To enable or disable the touchpad, you can use the function key. It depends on the laptop model. Either use the FN + F9 (F9) or FN + F5 (F5)

  In case this does not work you need to connect a USB mouse, just to be able to reinstall the driver for the touchpad, but to be honest, I t will think his problem of the touchpad driver.