Touchpad does not work in the guest account

Similar Questions

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• Touchpad does not work on the Satellite a series

  Greetings!

  I have Toshiba Satellite and I have a touchpad issue.
  My touchpad does not work. I downloaded the drivers for it, and it still does not.

  Is someone can you please help me solve this problem?

  Thank you.

  What do you exactly mean with it s not working do not?

  What cell phone do you have? Have what the touchpad driver you installed?

  Have you checked if the touchpad was not disabled?
  Using the FN + F9 key combination, you can disable and enable the touchpad feature!

• Touchpad does not work on the Satellite A100-812

  Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
  Help, please.

  ([email protected])

  Hello

  you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
  Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

  Would be recognizing a few comments if it worked. :)

  Welcome them

• Touchpad does not work on the Satellite L50t-A-131

  All,

  My touchpad has stopped working. The light of the little mouse in the upper left corner is off. When I attach an external mouse pointer appears again and everything is fine, when I remove the mouse pointer disappears again.

  I accidentally turned off in the past by pressing F5, but that doesn't seem to be the issue this time.

  I have recently upgraded to windows windows 8.1 8 and do not know if this may be a factor

  All advice welcome

  We start with basic stuff. Touchpad is correctly recognized and listed in the Device Manager?

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Touchpad does not work on the Satellite A100

  Hello

  I bought a satellite A100 (PSAA9) and have a problem with my touchpad. For some reason, the keys do not respond sometimes and I have to press the Fn + Alt keys to solve the problem, and it works well. Later, he appears again and I didn't Kow why?

  The only thing I can say is whenever I press the key as alt Gr, the touchpad everything is blocked.

  In addition, when the keyboard is locked, my mouse is not working well (left click does not respond and do a right click does the same thing as a normal left click). Again, I press Fn + ALT and it's ok.

  Hope someone can help me please!

  Thanks in advance!

  ARNO

  HM, sounds like a very boring and weird problem. Have you tried to reinstall your system or at least a linux live CD to see if the problem still occurs if you start a different operating systems?

  If you didn t tried, then it would be useful. Maybe just a problem of software it s. But if so and the problem doesn´t want to go further, then you have a huge problem and your next step will be to put your machine to an authorized service partner. Why?

  Because if so, then you would have probably a hardware problem and you won´t be able to fix it yourself. The explanation is pretty simple and easy...

  Welcome them

• Touchpad does not work after the new installation of windows 8.1

  Hi, I have a hp envy sleekbook m6 model. in any case since I installed windows 8.1 cool my touchpad works until a point. Ill install the driver and it works fine until I have shut down the laptop computer, then restart. IM pretty sure that the driver is updated automatically and does not properly. Any help would be greatly appreciated.

  My model: HP ENVY m6-k010dx

  Hello again loplop8989l,

  Thanks for the quick response!

  Since you are able to use your TouchPad before restarting your computer, I recommend that you follow this document on How to perform a boot in Windows. This should help

  If the problem persists, I suggest to restore your system to a restore point when you first install the drivers for your TouchPad. To do this, please follow this document on using Microsoft System Restore (Windows 8).

  Once you have restored your system to when the pilots first TouchPad installation, please follow this resource on how to activate the update or disable automatic so only with the help of HP Support Assistant (Windows 8). This should help to disable automatic updates and check to see what firmware to download individually. Please install each update individually, taking note of update causes incompatibility of software with your TouchPad.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Touchpad does not work on the home screen 'all '.

  Hello

  Select 'All' on the home screen of the device, then select the touchpad. The full Menu does not open upward. 6.0 device (9780) "BOLD". One cannot solve the same?

  "BOLD" 6.0 device (9780)

  Thank you

  Hello

  I solved this. It works very well.

  Thank you

• touchpad does not work after the upgrade to windows 8.1 ScrollBar

  Hello

  I recently updraded my Sony Vaio VPCEH35EN to windows 8.1 Pro. Everything works fine and smooth, but is a question annoys me a lot. My touchpad scroll doesn't work at all. I have Alps pointing driver installed on my laptop, but it seems that this driver is not yet support windows 8.1. I also tried synaptics driver but still does not have in-depth touchpad scrolling.

  Can someone please suggest something?

  Hi kuberchib!

  After checking, it seems that there are still no drivers for the touchpad for Windows 8.1. Please check this page for updates about the drivers for the touchpad.

  -Tim

  bit.LY/LapMagWin

• TouchPad does not work after the downgrade from Vista

  I found this before a year ago but I can't find him. It's a program that will enable the touchpad after going from Vista to XP.

  Fn + F9 does not help, Ive already tried to reinstall the drives and the utility of ON / OFF.

  Hello

  Usually a toggle Touchpad utility would enable and disable the touchpad by pressing the FN + F9 keys.

  I think you could find it on the page of the European driver Toshiba

  Welcome them

• Touchpad does not work on the Satellite A500

  Hey,.

  I opened for a long time as a result of thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=228228𷮄

  I installed the driver. He worked for a while.

  After a few reboots - the same error is back.

  No scrolling (any question with 1 or 2 fingers) or other special features of the pad were more possible. :(

  Can someone tell me why the problem occurs? Why again and again if I once fixed?
  What can I do to ensure that the problem is solved at every time?

  Hopefully, you can help me... ;) Thank you!!

  --
  Kind regards
  PSP.

  Hello

  The special features of the touchpad can be configured in the control panel-> mouse-> device-> settings button settings
  There you can enable and disable all the features possible touchpad like scrolling, tapping, etc.
  Of course, the touchpad driver must be installed correctly.

  I put t know why it happened again, but in most cases different updates (Microsoft updates) or other preinstalled software could cause this

• Windows Vista Business 32-bit external drive does not work in the administrator account

  Hello, I installed Microsoft Windows Vista Business 32-bit on a Dell Precision T3400 workstation, and I have also configured the strategies of groups for Non administrators. Basically, I disabled the removable drives, 'C' and had "only for non administrators." After edit in GP, the system has been precisely set and I am able to access the Administrators account and copy stuffs from my local drive on my USB key. But a few days later, I'm not able to use my USB or other external drives in Administrator account, it shows that 'inaccessible '. But I can't access local drives 'C' or '. Then I have to redo the group policies and it will last only for 3 days. Thanks :)

  Hello

  You are on a domain network?

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Duo 13 Touchpad does not work after the reactivation of hibernation

  In my 13 Duo running Windows 8.1, when I put on after his hibernation because of the battery, the Synaptics driver stops working and pilot generic Microsoft hid resumes (erratic behavior). I have to reboot to get it working again. I use the Synaptics 17.0.8.5 driver. The VT is enabled in the BIOS because I use VirtualBox extensively. Also, when I do ' shutdown/h' cmd and Hibernate manually, the touchpad works after I turn it on. This problem arises when it is low on battery power. Does anyone also have this symptom? I noticed Synaptics has released the most recent drivers, but Sony is not keep in touch with updates.