Touchpad does not work on satellite A110-276

Hello

Im having trouble with the touchpad on my satellite A110-276.

I just installed Vista Home Premium and spent in section Vista drivers and downloaded and installed the driver Vista ALPS.

The touchpad works fine until I restart, then the installation to come again touchpad screens and I have to re - install before it will work.

I uninstalled and reinstalled, but the installation screens go up every time that I reboot.

I even uninstalled and reinstalled Vista a few times. (Product recovery disc install XP and the problem persists if I installed XP and then switch to Vist and then install the vista drivers)

Please can someone help?

Thank you very much
Bunximo.

Check if it works in Windows XP? Perhaps you should try and install the drivers for the touchpad with the admin rights.

Have you tried to download the drivers again? I can sometimes happen that packets are corrupted during the download.

Tags: Toshiba

Similar Questions

  • Touchpad does not work on Satellite C55-A-184

    My touchpad does not work...
    I don't have a mouse to use to get the details of the driver etc.

    Can someone please help
    It is so boring.

    I can't download the update of the driver as I'll have to use the kindle to find help,
    Any advice would be greatly appreciated,

    Thank you.

    What happened exactly, or what exactly makes you in the past, until this problem happens?

    First of all, please post some details on your laptop model and the system you are using.

    Then check if your touchpad isn't disabled.
    To enable or disable the touchpad, you can use the function key. It depends on the laptop model. Either use the FN + F9 (F9) or FN + F5 (F5)

    In case this does not work you need to connect a USB mouse, just to be able to reinstall the driver for the touchpad, but to be honest, I t will think his problem of the touchpad driver.

  • Touchpad does not work on Satellite L30 - X 10

    Hi to you all.
    I have the following problem: scrolling on the touchpad does not work on my laptop. If someone can tell me how to solve this problem I would kindly.

    Hello

    I don't know if this may be a good solution but perhaps it s worth a try:

    1. download the latest version of the software here touchpad:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    2. remove the old software
    3 reinstall the downloaded software
    4. go to mouse properties and check if everything is set up (especially the scrolling feature)

    Give some feedback in case of additional questions...

    See you soon

  • FN key on / off TouchPad does not work on Satellite A200

    Hello

    I have a problem with my touchpad. I am running Vista Business and have my touchpad drivers installed but the Fn key combination to turn power switch does not work. He started working when I install package addes, but then my brightness FN key combination does not work

    What can I do for work?

    You must install all of the things listed in document Instructions of facilities. Please install any substance listed in this document because the order of the facilities is very important.

    You understand that by using FN keys combination you have influence on several different applications. Enabling/disabling the touchpad is application separately. Flash cards is separately applications and a part of the package of added value.

    Just install all the utilities and tools Toshiba and everything will be ok.

  • USB does not work on Satellite A110-294

    Hello

    I must first apologize because my English is not perfect, so I'll use simple words.

    A friend has a problem with its ports USB on a Satellite A110-294. I try to solve the problem, but without success until yet.
    I did a fresh install of windows XP with the toshiba installation CD, but it does not solve the problem. Then I try to remove usb devices in system properties, but there is a problem when I try to remove the usb host controller. System freez and nothing works no more! I remove hub root, but it works.

    I try to download some difficulty for usb with SP2 problems, but the prob still here. I saw there are some updates to INF files for some chipset intel but it is impossible to find the update intel celeron chipset. Update the BIOS to 1.70 and no result.

    I try to look for some drivers for the motherboard of toshiba but I can't find anything.

    What can I do to fix this?

    Satellite A110-294 belongs to the series of PSAB6E.

    On the Toshiba site, you won't find a chipset driver because it s built into the display driver for this model (chipset). You don't need a driver chipset Intel, this laptop has an ATI graphics chip and chipset.

    Then try to update the display driver:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Win 7 of the touchpad does not work on Satellite C855-21V

    Hello everyone!

    I have a Satellite C855-21V and it came with Windows 8. After a week of disaster I m sure I want never again a Windows 8 on my computer!

    So, I installed Windows 7 and can find all the drivers somewhere in the internet.
    The only thing that does work is the touchpad.

    8 Win driver Don t work and other models the driver win 7 do not work.
    Does anyone know what brand the touchpad or where to find a driver for win 7?

    Thank you all for the help!

    Best regards

    Frank

    Hello

    First and foremost the touchpad should work after installing Win 7.
    The Windows contain a standard touchpad driver that needs to control the touchpad.

    Of course the extra Synaptics driver installation would give more willing touchpad (fingers to scroll, etc.), but also without the driver Synaptics touchpad should work.

    In any case, I already mentioned the Synaptics driver that you can download that here:
    http://www.Synaptics.com/resources/drivers

    PS: is the active touchpad? F5 turns the touchpad on and off

  • Click left and right touchpad does not work on Satellite L50

    I have a new laptop Satellite L50 CI3. However, it seems there is a problem with the left and right keys on the touchpad.

    Right-click behaves like a left click i.e. it does not open a menu.

    Left click cannot drag and drop, including when you use the scroll bars.

    I reinstalled everything, but nothing has changed. Is this a common problem? Is this likely to a hardware or software problem?

    Hello

    On this virtual path, it is not easy to say what the problem is here. Have you noticed this problem on there first day of use?
    I mean when you start your laptop for the first time that it has original factory settings and everything should be OK.

    If I just understand that there is some response when you use the touchpad buttons so that you can try is to set all the options of touchpad on default settings.

  • Keyboard and Touchpad does not work on Satellite L

    It's the second time this has happened to me
    However the last time a system restore solved the problem, this time restore system did not work.

    I can use my keyboard at startup and in safe mode, but that's all.
    I am currently using a USB keyboard and a mouse.

    I tried almost all the suggestions with no joy. Help, please.

    Hello

    There are not many options that could solve this problem.
    It can be a hardware software or related issue.

    You can use the internal keyboard in the BIOS?
    Select this check box.
    If this is not possible, I guess that the hardware is defective.

    Also I recommend that you test the keyboard and the touchpad using factory settings.
    Grab the laptop and check if the keyboard would serve. Otherwise you will need a help of a technician for laptop to replace the keyboard and the touchpad

  • Second FireWire PCMCIA card does not work on Satellite A110-178

    Hello!
    I tried to use the PCMCIA card as the second controller FireWire from different producers, but they can't take it.
    Sweex - PCMCIA Firewire kaart
    laptop computer en PCMCIA USB FireWire 1394 Combo CARDBUS

    I really need the second FireWire controller on my Toshiba Satellite A110-178.

    Thanks Ben

    Hello

    The Satellite A110-178 PSAB0E supports a Cardbus 32-bit / PC - Card 16-bit slot and you can ONLY use cards PCMCIA type II

    Please do not forget that your PCMCIA firewire card supports hardware specifications listed above.
    If not; you will need to purchase another compatible!

    Best regards

  • Touchpad does not work on Satellite L300

    Hello

    A few days ago I noticed that my my L300 touchpad not working anymore. I work with the USB mouse preferably but need touchpad also. My system (Vista) tells that the touchpad is enabled and works. I've already disabled and re-enabled the touchpad, and I also updated the touchpad driver all without success.

    Can someone give an opinion?

    Thank you
    Bertram

    It s good choice to contact the ASP for a check

  • Dual-mode touchpad does not work on Satellite A200-1Y0

    Hello

    I recently bought a Satellite A200-1YO PSAE3E model. I tried to activate the mode button dual pad, however, sometimes nothing no blue lights met etc. How will I know if this model has this feature?

    Initially, I got the Alps driver and tried to install the Synaptics one but this has removed the Alps a kind I had limited functionality IE no advanced settings option.
    I've restored this new one in the Alps.

    The operating system is Win Vista Home Premium 32-bit edition.

    Any help would be appreciated.

    Thank you

    > How can I know if this model has this feature?

    Touchpad on your laptop looks like on THIS photo?

    Otherwise there is no dual-mode option and the touchpad cannot be blue. ;)

  • Satellite X 200-219 - the touchpad does not work as it should

    Hi all

    I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

    So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

    I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

    Any help you can give will be greatly appreciated.

    Thanks in advance,

    Lee

    I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
    Found some related parts the touchpad:
    Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
    Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

    But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

  • Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

    I have a Satellite C50D-A0302, PSCGWF part number.
    I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

    How can I get the right drivers for the touchpad?

    How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

    Thank you!

    As you probably know Toshiba does not support Linux and does not offer Linux drivers.
    All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

  • Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

    Hello world
    I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
    Any suggestion?

    Hello

    You reinstall the driver for the touchpad?
    Check it!

    Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

  • Touchpad does not work after the removal of the Satellite U400-18F

    Hello

    Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

    My laptop worked fine except the touchpad does not work!
    So please someone know how to unplug this cable so I can fix it...

    http://img841.imageshack.us/img841/4549/removetopcover17.jpg

    Thank you

    There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

Maybe you are looking for

  • Graphical user interface does not display properly

    Basically I upgraded my windows build 10 to 10122 yesterday. When I launched Firefox, MISTLETOE is totally screwed and makes Firefox unusable on my machine. This seems to be the specific machine as on a computer that is running the same build 10 wind

  • Cannot increase the RAM in end-15 27 "iMac, retina

    This question drove me crazy. End of last year, I bought an iMac 27 "new retina (17.1 model) with 16 GB of RAM of factory. I have since decided to upgrade to 32 GB myself - but apparently not. I tried both levels of separate module of Crucial (both s

  • my files show that I'm missing windows\system32\dfg.msc

    When I try to defragment my system it says I'm mising windows\system32\dfg.msc

  • The slide show does not.

    I have Windows 7 Home Premium 64-bit.  I've been running a slide show on the Bureau for more than a year now, but it has stopped working & wallpaper is now set on a solid color.  I can change the color, but can not set the background to nothing else,

  • Not supported by this version of Windows

    I recently downgraded to windows 7 on my desktop Windows 8.1. I don't really like the feel of everything. Which is besides the point. When I reinstalled windows and went to update my drivers and I get a dialog box that says something in the sense of