Touchpad does not work under Vista - Satellite A110

I installed Win Vista business on Satellite A110...
I downloaded the alps touchpad drivers: the drivers are installed, but it does not work!
Is this a known issue? I did something wrong?
Thank you

Downloaded the correct drivers for your computer? Sometimes the machines appear to be similar, but then they have different hardware...

Your touchpad has a function before?

Welcome them

Tags: Toshiba

Similar Questions

  • Built an MSI that does not work under Vista but works under XP

    We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

    You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

    MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

  • Touchpad does not work on my Satellite C850D

    Satellite C850D - touchpad does not work after the initial start-up. Will not answer keys F5 or F9.
    Don't let me even use the recovery disc. Once I go to the first page of touchpad and mouse to

    Hello

    You can use the USB attached external mouse?
    Please check this...
    Also FN + F5 (or just F5) would enable and disable the touchpad.

    In which case it won't work, please try to reinstall the driver for the touchpad.
    The driver can be downloaded from the Toshiba UE driver page.

  • Touchpad does not work on the Satellite a series

    Greetings!

    I have Toshiba Satellite and I have a touchpad issue.
    My touchpad does not work. I downloaded the drivers for it, and it still does not.

    Is someone can you please help me solve this problem?

    Thank you.

    What do you exactly mean with it s not working do not?

    What cell phone do you have? Have what the touchpad driver you installed?

    Have you checked if the touchpad was not disabled?
    Using the FN + F9 key combination, you can disable and enable the touchpad feature!

  • Equium A100-060 touchpad does not work with Vista SP1

    Hi, my touchpad doesen't works under Vista with SP1. If I use Vista or any other operating system that the touchpad works without any problem.
    The driver on Vista Sp1 is the latest available.

    How can I solve this?

    Hello!

    Disable you the touchpad with FN keys?
    On my Satellite L300 it s FN + F9

    Do you have the yellow marks in Device Manager?
    Has connected an external mouse and doesn't that work?

    Good bye

  • My touchpad does not work well on Satellite C55-A-1ND

    For several days my touchpad does not work well. It has nothing to do with the power touchpad button on the F5 key.

    The touchpad is most time does not and something a bit but I can't use the touchpad at all now.

    When I attach my external mouse on my laptop I can use my laptop otherwise I can't use my laptop.
    I already rebooted my laptop several times, but it helps not at all.

    I hope someone can help me!

    You said that this issue has nothing to do with the touchpad on/off function s.
    So what's exactly wrong with the touchpad? Is he disabled or enabled?

    Have you checked the settings in the control panel-> mouse-> last (device settings) tab-> settings button?

    Have you already tried to reinstall the software/driver for touchpad?
    If this is not the case, do.

    By the way: what model of laptop and what system you have?

  • Keyboard does not work under Vista on Satellite L300D

    Dear readers,

    I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

    Today, I started the book and noticed that I was not able to type my password for Windows.
    I thought, there must be a problem with the keyboard and restarted the laptop.
    I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

    I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
    Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
    So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

    So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

    But it's still there.

    Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

    I would be very happy for any advice or help

    Greetings from Berlin

    Thomas

    PS: I want to say sorry for my bad English... :-)

    Hey mate

    > It's about 5 months and until now I didn't have problems.

    I wonder why this keyboard problem happened after 5 months of use?  :|
    This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

    In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

    I think that your warranty is valid and therefore everything must be covered by the warranty!

    Good luck

  • Satellite A200-1AX: many applications does not work under Vista

    Greetings,

    I bought A200 1AX a few days ago and I'm not having a good experience with regard to the installation of applications on this Vista box. Even install yahoo messenger did not work and produces the NSIS error. 3D max 9 installation does not work (even though some have managed to operate); Install Adobe CS3 (supposed to be for Vista) did not entirely - the photopshop component have not installed, etc.

    The bottom line, I plan to move to XP OS. Means the required BIOS update I have my Vista recovery CD will NOT work after the switch to XP?

    Thank you for your feedback.

    Best regards, Ashraf.

    Unfortunately I put t know how to help you.
    Usually, if the 3rd party applications are designed and support the Vista while there should be no problem with unique program facilities.

    Check if all software packages are completely cared for and compatible with Vista.

    > The necessary BIOS update means that I have my Vista recovery CD will NOT work after the switch to XP?

    No, after the update the BIOS of XP, you will still be able to use the Vista CD from recovery, but perhaps some functions such as the FN keys will not work.

  • Touchpad does not work on the Satellite A100-812

    Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
    Help, please.

    ([email protected])

    Hello

    you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
    Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

    Would be recognizing a few comments if it worked. :)

    Welcome them

  • Touchpad does not work on my Satellite C75

    In my Satellite C75 manual is written that we can activate the touchpad 19.ne FN + F5
    but unfortunately this does not work.

    Thank you for your help

    Hello

    Fn + F9 does not active / disables the touchpad on laptop series.
    The right combination is Fn + F5 or just press F5.

    I also recommend to check this FAQ doc:
    http://APS2.toshiba-tro.de/KB0/TSB5303QQ0002R01.htm

  • CD/DVD does not work under Vista

    I have a laptop Compaq Presario F700 under Windows Vista Home Premium.  For the first year and a half i have owned my laptop, my CD/DVD drive worked perfectly.  A month ago it has stopped working completely.  It does not appear in my computer or Device Manager and it does not open.  I don't think that the drive is defective because it will open when the first Compaq screen shows up, but when the Microsoft Corporation loading screen is up, it stops working.  I used Google to good use, but none of the solutions I found worked.  I tried to delete upper and lower filters but they aren't there, and I tried all the solutions Microsoft Fix - It nothing works.

    Any help is greatly appreciated

    Hello

    Reader might indeed have gone wrong.

    Check with support from Compaq and their forums for known problems.

    Compaq - Support
    http://www.Compaq.com/country/cpq_support.html

    Compaq (HP) - Fourms
    http://h30434.www3.HP.com/PSG/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Touchpad does not work on my Satellite Pro L870 - 18G

    My touchpad suddenly stopped working. I had the laptop on the way "sleep" for a few hours and when I came back the touchpad did not work... The touchpad has a habbit of deaktivating itself for no reason, but now it is enabled and does not. Very annoying!

    I tried to download the driver again to reinstall it, but it is not listed in the section driver for my laptop?

    Any ideas?

    Touchpad (mouse) registered and installed correctly in Device Manager?
    Touchpad may be disabled? Make sure that the touchpad is enabled correctly.

    By the way: what model of laptop and operating system are you using?

  • Windows Update does not work under Vista

    Hello! I have Vista Ultimate 64 bit and a few weeks ago, I noticed that my windows updates had stopped working. I followed the instructions to do a repair of my drive, but got "the upgrade is not available. Press Cancel and then select upgrade to a newer version than what you have "." However, there is nothing that gives me this opportunity. How am I supposed to fix it then?

    I have a feeling that this happened after a service pack has been installed (3?), but as I put it to the automatic updates I have not noticed exactly when he had ceased. I'm frustrated and very frankly also irritated. I paid a fair bit for Vista Ultimate and I'm basically says my drive is useless. I ran the Microsoft Fix It, and he said he solved the problem, but it didn't. I also did a system restore and that do not also not fixed the problem. The error code I get whenever I have try to do an update is 80070490. I saw a lot of messages from people having this same problem, while searching for a solution, so there's obviously a problem somewhere I would appreciate to help get it sorted please.
    Thank you and best regards,
    Sharon

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    or

    0 X 80070490 - ERROR_NOT_FOUND
    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    http://support.Microsoft.com/kb/931712
    "Explains the SFC / Scannow.

    See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    A repair install is the usual solution of SFC/scannow does not work.
    However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
    http://support.Microsoft.com/kb/958044

    NB: If you have installed SP1 or SP2 for Vista

    Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

    Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
    http://support.Microsoft.com/kb/948537

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
    http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  • Satellite L305D-S5873 - touchpad does not work under Win XP

    HUGE problem
    Key Satellite L305D - S5873 DOESN'T work under XP.

    I am with XP now and doesn't work, while I had Vista it worked and he stopped.
    Then I installed the xp and still, it does not.

    Hello

    So you say that the touchpad works properly using the Vista operating system, but you are not able by using the touchpad running Win XP.
    Is this good?

    If Yes, then I think that you have not installed the XP drivers good touchpad.

    Satellite L305 belongs to the Toshiba U.S. series and you should visit the Toshiba driver page us to get XP drivers

    Sorry, but for me it s a clear case. It's a softer question, and possibly the right driver installation is required.

  • FN key does not work under Vista on a Satellite A100-192

    After the key Fn for Vista Installation do not work.
    HotKey Utility and other tools are installed (in recommended order), but when to start Vista displayed the error message: "could not start the HotKey Utility.

    All the other device works.

    Hello Kat

    I have the same laptop. This is the Satellite A100-504 comes with Windows XP Home edition. It is the different number (504) but the same hardware configuration, and the number PSAA9E. I have preinstalled Vista last week successfully and everything works well.

    You use facilities upgrade Toshiba Vista DVD or you own Vista DVD?
    In any case, I installed clean Vista OS (using the facilities of Microsoft CD). After that, I visited the download page of Toshiba and initially downloaded the document called Instructions of facilities.

    Please, do the same and install stuff all listed in the order. It is very important. After this Vista should work well and also all Toshiba designed tools and utilities.

    BTW: standby power utility is not like before as Windows XP Home edition. Laptop uses Vista power settings now.

Maybe you are looking for

  • Scanner printer (kodak ESP 9250) DRIVER UNAVAILABLE

    I get an error message saying driver not available for my scanner on my KODAK printer.

  • C710-2847 No Bootable Disk

    Lost my OS a few days ago. Downloaded the recovery of BONES at Google feature and even installed on the C7 and deleted the USB key. The system restarted, but I still had no OS work. Type key TAB and learned that I have no boot disk. So either the dis

  • sqlpubwizinstaller.exe

    Hello- Please clarify - I tried to add more options to my installation of visual studio 2008 - SQL - installer stop and wants the path for sqlpubwizinstaller.exe - but this file is not on the computer or on vs2008 dvd - how? where can I find this fil

  • Difference between download and upgrade

    Original title: information difference between download and upgrade

  • BlackBerry Smartphones Version 5 SMS window

    Just upgraded to V5 software on my 9000 "BOLD", I hate the window type of sms/mms, instant messaging is it possible to change this, or I have to re - install my previous version of the software?