Touchpad has stopped working on my Satellite L750

Similar Questions

• Touchpad has stopped working on my Satellite C850

  I HAVE A TOSHIBA C850.

  RECENTLY THE TOUCHPAD STOPED EVEN THE RIGHT TO WORK AND CLICK LEFT BUTTON, BUT THE WORK OF CRUSOURS OF KEYBOURD.

  WHAT CAN I DO?

  Have you checked if the touchpad is disabled?
  Use the FN + F9 key combination and check if the touchpad is enabled correctly.

• Satellite A200 - touchpad has stopped working

  I have a Toshiba Satellite A200. Touchpad has stopped working, I can no longer scroll. I tried all the settings, but it did not work.

  What should do?

  Why you n t trying to update or reinstall the driver of the touchpad?

  I think that this should be done first of all, you can download the compatible driver since the European driver Toshiba page and could reinstall it.

  Concerning

• Touchpad has stopped working on Satellite A30

  The touchpad has stopped working, I tried most of what is obvious
  any ideas?

  Hi Phil,

  I assume you tried Fn + F9? This combination activates / deactivates the touchpad on and outside.

  HTH

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Touchpad has stopped working in my Satallite L850

  Hello

  My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

  Kind regards
  DAV

  > Touchpad has stopped working in my Satallite L850
  How to understand this?
  You can toggle touchpad by using the FN + F9 key combination?
  The touchpad driver is installed correctly?
  Touchpad is listed in Device Manager?

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?

• "TosBtMng has stopped working" on my Satellite A200/H01

  I have a Satellite A200/H01 with Vista Home Premium 32 bit.
  A few days ago I started up this message at startup: "TosBtMng has stopped working" I have updated all the BT device drivers in Device Manager, but it did not help. I then installed the battery BlueTooth (v64000T_20090324_x32.exe), and this did not help, either. In fact, the error "TosBtMng has stopped working" message kept coming upward on several occasions, even when I tried to shut it down.

  Could someone help me please?
  I use BT to sync with my mobile phone (Nokia 6120 Classic) via PC Suite from Nokia 7.1.30.8 worm. I was using the computer BT without problem for 18 months now, until last week.
  Thank you very much. Andrew

  Try the new Bluetooth stack v6.40.02

• ConfigFree has stopped working error on Satellite L850-13R

  Can someone help me with this and also tell me about.

  Everytime I turn on my laptop I get notification message "Configfree has stopped working"... "try to get the solution on the internet... "and I don't know what is the problem and how to fix it.

  I have Toshiba Satellite L850-13R, i7, using Windows 7 Starter.
  Can someone tell me what is this error and how to fix it? and, also, my laptop is very slow since I got these notifications. I scanned and there are no threats found...

  Thank you in advance...

  I m not very well why the Utility of Toshiba ConfigFree has stopped working, but I can tell you how you can solve this problem.
  I think simple installation ConfigFree could solve this annoying problem.

  How the product?
  First download easy all the utility driver page ConfigFree Toshiba UE
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
  Please pay attention to the version. There is a ConfigFree utility for 32-bit system and 64-bit.

  After the ConfigFree utility has been downloaded, uninstall the previous software installed.
  In Control Panel-> programs & features, you should find the ConfigFree
  After the tool has been uninstalled, restart the laptop
  Then unizip the package downloaded and start the installation.
  Reboot once more.

  ... That's all :)

• Bluetooth has stopped working on my Satellite P105-S9722

  I have a Satellite P105-S9722 and everything seems fine except the occasional extreme overheating it stops. In any case, my blutooth has stopped working.

  Here's what I've done so far:

  1 formatted, reinstalled clean (running the toshiba Vista business upgrade)
  2 tried to use the most recent bluetooth Vista drivers fron this site & Blutooth monitor 3 w / stack windows

  I tried several times without success. Here's what's happening.

  When I install toshiba stack, it is all the way to the grip and "install bluetooth driver". I get an error message on a USB device unknown who breaks down and will not be installed. It is under the TouchChip Fingerprint coprocessor. In addition, with the Bluetooth Monitor 3 installed, has no "BLUETOOTH" category in ther CP to set properties

  That's all. It hags just here and bogs of the bridge I have to restart the system.

  Any suggestions?

  Thanks in advance!

  If the laptop is overheated, you must remove the dust from the radiator. You can use a can of compressed air to blow off the dust.

  Have you tried to use the battery Microsoft Bluetooth standard instead? To use it, you must uninstall the Toshiba Bluetooth stack, then just install the Bluetooth screen

• "Configfree has stopped working" error on Satellite L300 Win7_32bit running

  Full text message * task status bar Menu ConfigFree has stopped working *.

  Whenever the modem USB (key Huawei E352 HSPA USB) connects this error. Running Win7 Ultimate 32 bit.

  Google search: some believe it is a virus, others believe that it is a matter of hardware/software.

  How should I do? Any ideas?

  Thank you

  It is not easy to help you because you use external third party material. I put t think ConfigFree is tested as intensely with all sorts of external devices.
  Why this may be just speculation. Still is it that ConfigFree is not necessary to run then I recommend to leave ConfigFree before starting to use your modem. How to fix? Good question. What you can do about it? Not much. Perhaps to find new version ConfigFree and reinstall in the hope, it will be OK. In my view, no more than that.

  I use ConfigFree constantly with LAN and WLAN networks, and there is no problem at all.

• Webcam has stopped working on my Satellite L

  My Webcam has stopped working so I uninstalled and reinstalled the app and its still does not.

  What should I do?

  Any help would be great! Thanks :) x

  Hello
  Occur when you
  What model of laptop do you have?
  What operating system do you use?
  Webcam application will start automatically with Windows OS?

  What happens when you click on the Photo/Video button?

• Fan has stopped working on the satellite

  I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

  I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

  How long they tend to take to fix these things?

  Hello

  I put t know 100% if they work on Sunday, but I presume that they don t
  However, can you please tell what camera do you use?

  I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
  So if the fans don't turn you should not turn on the laptop.

  But maybe the cooling modules run only with the lower speed?
  This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

• My touchpad has stopped working

  Hello. I'm Zaitul and I Aspire E 15. the touchpad suddenly stopped working and if the cursor isn't even when I touch the touch pad. my laptop still can be exploited can I use an external mouse. but the touchpad is one of the important components for certain situations.  What should I do?

  I had the same problem happen to me only yesterday. I ran windows update and it showed the optional updates to install. One of them was the "Serial IO I2C ES controller driver Intel", which I clicked on update. It installed and required a reboot. To restart, I noticed that the mouse cursor disappeared during the connection and after that the touchpad was totally insensitive. I tried to disable/enable the touchpad with FN + F7, but that did not work. Fortunately, I had a classic USB mouse I plugged, which worked. Open the Control Panel, Device Manager, it showed the devices system/I2C controller with a yellow triangle next to it (showing that the driver could not run). I chose to restore the driver to the previous version, and the touchpad started working immediately. I suspect that you have the same problem.

  To fix:

  1. open Control Panel.

  2. Select and open the Device Manager.

  3. Locate the I2C controller in system devices.

  4. double-click on I2C controller.

  5. Select the driver tab and click on the button return to the previous version.

  6. your touchpad should start working again.

  7. close the Device Manager.

  8. close the control panel.

  I see the Acer response to this problem and their suggestion because I suspect that in the following days, there will be a large enough percentage of users of Acer laptops running into the same question.

• Satellite 1900-303 Touchpad: has stopped working

  The touchpad on my Satellite 1900-303 has suddenly stopped working for no apparent reason. The touchpad icon has disappeared from the office toolbar & I do not see the touchpad listed in Device Manager. However, the ALPS touchpad driver is listed in the installed programs.

  The laptop runs on XP Pro SP2. Can anyone help with this please?

  Can you imagine that the TouchPad is defective and this may be the reason why it doesn't work?